ath10k: debugfs support to get final TPC stats for 10.4 variants
Export the final Transmit Power Control (TPC) value, which is the minimum of control power and existing TPC value to user space via a new debugfs file "tpc_stats_final" to help with debugging. It works with the new wmi cmd and event introduced in 10.4 firmware branch. WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final $ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final TPC config for channel 5180 mode 10 CTL = 0x 0 Reg. Domain = 58 Antenna Gain = 0 Reg. Max Antenna Gain = 0 Power Limit = 60 Reg. Max Power = 60 Num tx chains = 2 Num supported rates = 109 ******************* CDD POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 ******************* STBC POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 *********************************** TXBF not supported ********************************** The existing tpc_stats debugfs file provides the dump which is minimum of target power and regulatory domain. cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats Hardware_used: QCA4019 Firmware version: firmware-5.bin_10.4-3.0-00209 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Showing
This diff is collapsed.
Please register or sign in to comment