Commit bcc65700 authored by Deepak M's avatar Deepak M Committed by Jani Nikula

drm/i915/glk: Program txesc clock divider for GLK

v2: Addressed Jani's Review comments(renamed bit field macros)

Txesc clock divider is calculated and programmed
for geminilake platform.
Signed-off-by: default avatarDeepak M <m.deepak@intel.com>
Signed-off-by: default avatarMadhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487335415-14766-7-git-send-email-madhav.chauhan@intel.com
parent 09a568e7
......@@ -8251,6 +8251,11 @@ enum {
#define _MIPI_PORT(port, a, c) _PORT3(port, a, 0, c) /* ports A and C only */
#define _MMIO_MIPI(port, a, c) _MMIO(_MIPI_PORT(port, a, c))
#define MIPIO_TXESC_CLK_DIV1 _MMIO(0x160004)
#define GLK_TX_ESC_CLK_DIV1_MASK 0x3FF
#define MIPIO_TXESC_CLK_DIV2 _MMIO(0x160008)
#define GLK_TX_ESC_CLK_DIV2_MASK 0x3FF
/* BXT MIPI clock controls */
#define BXT_MAX_VAR_OUTPUT_KHZ 39500
......
......@@ -372,6 +372,53 @@ static void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
ESCAPE_CLOCK_DIVIDER_SHIFT);
}
static void glk_dsi_program_esc_clock(struct drm_device *dev,
const struct intel_crtc_state *config)
{
struct drm_i915_private *dev_priv = to_i915(dev);
u32 dsi_rate = 0;
u32 pll_ratio = 0;
u32 ddr_clk = 0;
u32 div1_value = 0;
u32 div2_value = 0;
u32 txesc1_div = 0;
u32 txesc2_div = 0;
pll_ratio = config->dsi_pll.ctrl & BXT_DSI_PLL_RATIO_MASK;
dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2;
ddr_clk = dsi_rate / 2;
/* Variable divider value */
div1_value = DIV_ROUND_CLOSEST(ddr_clk, 20000);
/* Calculate TXESC1 divider */
if (div1_value <= 10)
txesc1_div = div1_value;
else if ((div1_value > 10) && (div1_value <= 20))
txesc1_div = DIV_ROUND_UP(div1_value, 2);
else if ((div1_value > 20) && (div1_value <= 30))
txesc1_div = DIV_ROUND_UP(div1_value, 4);
else if ((div1_value > 30) && (div1_value <= 40))
txesc1_div = DIV_ROUND_UP(div1_value, 6);
else if ((div1_value > 40) && (div1_value <= 50))
txesc1_div = DIV_ROUND_UP(div1_value, 8);
else
txesc1_div = 10;
/* Calculate TXESC2 divider */
div2_value = DIV_ROUND_UP(div1_value, txesc1_div);
if (div2_value < 10)
txesc2_div = div2_value;
else
txesc2_div = 10;
I915_WRITE(MIPIO_TXESC_CLK_DIV1, txesc1_div & GLK_TX_ESC_CLK_DIV1_MASK);
I915_WRITE(MIPIO_TXESC_CLK_DIV2, txesc2_div & GLK_TX_ESC_CLK_DIV2_MASK);
}
/* Program BXT Mipi clocks and dividers */
static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port,
const struct intel_crtc_state *config)
......@@ -474,7 +521,7 @@ static int gen9lp_compute_dsi_pll(struct intel_encoder *encoder,
return 0;
}
static void bxt_enable_dsi_pll(struct intel_encoder *encoder,
static void gen9lp_enable_dsi_pll(struct intel_encoder *encoder,
const struct intel_crtc_state *config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
......@@ -492,6 +539,8 @@ static void bxt_enable_dsi_pll(struct intel_encoder *encoder,
if (IS_BROXTON(dev_priv)) {
for_each_dsi_port(port, intel_dsi->ports)
bxt_dsi_program_clocks(encoder->base.dev, port, config);
} else {
glk_dsi_program_esc_clock(encoder->base.dev, config);
}
/* Enable DSI PLL */
......@@ -543,7 +592,7 @@ void intel_enable_dsi_pll(struct intel_encoder *encoder,
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
vlv_enable_dsi_pll(encoder, config);
else if (IS_GEN9_LP(dev_priv))
bxt_enable_dsi_pll(encoder, config);
gen9lp_enable_dsi_pll(encoder, config);
}
void intel_disable_dsi_pll(struct intel_encoder *encoder)
......@@ -571,6 +620,14 @@ static void gen9lp_dsi_reset_clocks(struct intel_encoder *encoder,
tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port));
tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port));
I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
} else {
tmp = I915_READ(MIPIO_TXESC_CLK_DIV1);
tmp &= ~GLK_TX_ESC_CLK_DIV1_MASK;
I915_WRITE(MIPIO_TXESC_CLK_DIV1, tmp);
tmp = I915_READ(MIPIO_TXESC_CLK_DIV2);
tmp &= ~GLK_TX_ESC_CLK_DIV2_MASK;
I915_WRITE(MIPIO_TXESC_CLK_DIV2, tmp);
}
I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment