wifi: rtlwifi: rtl8192cu: Fix 2T2R chip type detection

rtl8192cu handles 1T1R devices (RTL8188CUS), 1T2R devices (RTL8191CU),
and 2T2R devices (RTL8192CU). The 2T2R devices were incorrectly detected
as 1T2R because of a mistake in the IS_92C_1T2R macro.

The visible effect of this is that the firmware was allowed to use
TX rates only up to MCS7.

Fix the IS_92C_1T2R macro.

Now my 2T2R device has much better upload speed.
Before: 46 Mbps.
After:  82 Mbps.

Also fix a debug message which was printing "RF_1T1R" even for 1T2R
chips.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/ed960059-5c77-422d-ac4e-fe9fc9d0d296@gmail.com

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/def.h

@@ -11,7 +11,7 @@
 #define CHIP_VENDOR_UMC_B_CUT		BIT(6)
 
 #define IS_92C_1T2R(version)		\
-	(((version) & CHIP_92C) && ((version) & CHIP_92C_1T2R))
+	(((version) & CHIP_92C_1T2R) == CHIP_92C_1T2R)
 
 #define IS_VENDOR_UMC(version)		\
 	(((version) & CHIP_VENDOR_UMC) ? true : false)

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

@@ -101,7 +101,8 @@ void rtl92c_read_chip_version(struct ieee80211_hw *hw)
 		rtlphy->rf_type = RF_1T1R;
 	rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
 		"Chip RF Type: %s\n",
-		rtlphy->rf_type == RF_2T2R ? "RF_2T2R" : "RF_1T1R");
+		rtlphy->rf_type == RF_2T2R ? "RF_2T2R" :
+		rtlphy->rf_type == RF_1T2R ? "RF_1T2R" : "RF_1T1R");
 	if (get_rf_type(rtlphy) == RF_1T1R)
 		rtlpriv->dm.rfpath_rxenable[0] = true;
 	else