Commit bd2355b8 authored by Daniel Scheller's avatar Daniel Scheller Committed by Mauro Carvalho Chehab

media: dvb-frontends/cxd2841er: do sleep on delivery system change

Discovered using w_scan when scanning DVB-T/T2: When w_scan goes from -T
to -T2, it does so without stopping the frontend using .sleep. Due to
this, the demod operation mode isn't re-setup, but as it still is in
STATE_ACTIVE_TC, PLP and T2 Profile are set up, but only retune_active()
is called, leaving the demod in T mode, thus not operable on any T2
frequency.

Fix this by putting the demod to sleep if priv->system isn't equal to
p->delsys. To properly accomplish this, sleep_tc() is split into
sleep_tc() and shutdown_tc(), where sleep_tc() will only perform the
sleep operation, while shutdown_tc() additionally performs the full
demod shutdown (to keep the behaviour when the .sleep FE_OP is called).
Signed-off-by: default avatarDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent d4a06464
...@@ -487,6 +487,8 @@ static int cxd2841er_sleep_tc_to_shutdown(struct cxd2841er_priv *priv); ...@@ -487,6 +487,8 @@ static int cxd2841er_sleep_tc_to_shutdown(struct cxd2841er_priv *priv);
static int cxd2841er_shutdown_to_sleep_tc(struct cxd2841er_priv *priv); static int cxd2841er_shutdown_to_sleep_tc(struct cxd2841er_priv *priv);
static int cxd2841er_sleep_tc(struct dvb_frontend *fe);
static int cxd2841er_retune_active(struct cxd2841er_priv *priv, static int cxd2841er_retune_active(struct cxd2841er_priv *priv,
struct dtv_frontend_properties *p) struct dtv_frontend_properties *p)
{ {
...@@ -3378,6 +3380,14 @@ static int cxd2841er_set_frontend_tc(struct dvb_frontend *fe) ...@@ -3378,6 +3380,14 @@ static int cxd2841er_set_frontend_tc(struct dvb_frontend *fe)
if (priv->flags & CXD2841ER_EARLY_TUNE) if (priv->flags & CXD2841ER_EARLY_TUNE)
cxd2841er_tuner_set(fe); cxd2841er_tuner_set(fe);
/* deconfigure/put demod to sleep on delsys switch if active */
if (priv->state == STATE_ACTIVE_TC &&
priv->system != p->delivery_system) {
dev_dbg(&priv->i2c->dev, "%s(): old_delsys=%d, new_delsys=%d -> sleep\n",
__func__, priv->system, p->delivery_system);
cxd2841er_sleep_tc(fe);
}
if (p->delivery_system == SYS_DVBT) { if (p->delivery_system == SYS_DVBT) {
priv->system = SYS_DVBT; priv->system = SYS_DVBT;
switch (priv->state) { switch (priv->state) {
...@@ -3594,6 +3604,7 @@ static int cxd2841er_sleep_tc(struct dvb_frontend *fe) ...@@ -3594,6 +3604,7 @@ static int cxd2841er_sleep_tc(struct dvb_frontend *fe)
struct cxd2841er_priv *priv = fe->demodulator_priv; struct cxd2841er_priv *priv = fe->demodulator_priv;
dev_dbg(&priv->i2c->dev, "%s()\n", __func__); dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
if (priv->state == STATE_ACTIVE_TC) { if (priv->state == STATE_ACTIVE_TC) {
switch (priv->system) { switch (priv->system) {
case SYS_DVBT: case SYS_DVBT:
...@@ -3619,7 +3630,17 @@ static int cxd2841er_sleep_tc(struct dvb_frontend *fe) ...@@ -3619,7 +3630,17 @@ static int cxd2841er_sleep_tc(struct dvb_frontend *fe)
__func__, priv->state); __func__, priv->state);
return -EINVAL; return -EINVAL;
} }
cxd2841er_sleep_tc_to_shutdown(priv); return 0;
}
static int cxd2841er_shutdown_tc(struct dvb_frontend *fe)
{
struct cxd2841er_priv *priv = fe->demodulator_priv;
dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
if (!cxd2841er_sleep_tc(fe))
cxd2841er_sleep_tc_to_shutdown(priv);
return 0; return 0;
} }
...@@ -3968,7 +3989,7 @@ static struct dvb_frontend_ops cxd2841er_t_c_ops = { ...@@ -3968,7 +3989,7 @@ static struct dvb_frontend_ops cxd2841er_t_c_ops = {
.symbol_rate_max = 11700000 .symbol_rate_max = 11700000
}, },
.init = cxd2841er_init_tc, .init = cxd2841er_init_tc,
.sleep = cxd2841er_sleep_tc, .sleep = cxd2841er_shutdown_tc,
.release = cxd2841er_release, .release = cxd2841er_release,
.set_frontend = cxd2841er_set_frontend_tc, .set_frontend = cxd2841er_set_frontend_tc,
.get_frontend = cxd2841er_get_frontend, .get_frontend = cxd2841er_get_frontend,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment