Skip to content

L
linux
Commit bd4d5488 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'ti-k3-soc-for-v5.6' of... 

Merge tag 'ti-k3-soc-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC family changes for 5.6

- Add missing power domains for smmu for J721e
- Add I2C, ADC, OSPI and UFS nodes for J721e
- Add OSPI and MCU syscon nodes for am65x
- Add IRQ line for GPIO expander on am65x

* tag 'ti-k3-soc-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu
  arm64: dts: ti: k3-am65-mcu: add system control module node
  arm64: dts: k3-am654-base-board: Add IRQ line for GPIO expander
  arm64: dts: ti: k3-am65: Add OSPI DT node
  arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials

Link: https://lore.kernel.org/r/c5b74bfc-f2f0-1b72-4a3c-4c1d478a023a@ti.comSigned-off-by: default avatarOlof Johansson <olof@lixom.net>
parents b252fd42 3f03a58b
Hide whitespace changes
Inline Side-by-side
Showing with 505 additions and 2 deletions
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
View file @ bd4d5488
......@@ -6,6 +6,14 @@
*/
&cbass_mcu {
mcu_conf: scm_conf@40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x40f00000 0x20000>;
};
mcu_uart0: serial@40a00000 {
compatible = "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
......@@ -95,4 +103,42 @@ adc {
compatible = "ti,am654-adc", "ti,am3359-adc";
};
};
fss: fss@47000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ospi0: spi@47040000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47040000 0x0 0x100>,
<0x5 0x00000000 0x1 0x0000000>;
interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x0>;
clocks = <&k3_clks 248 0>;
assigned-clocks = <&k3_clks 248 0>;
assigned-clock-parents = <&k3_clks 248 2>;
assigned-clock-rates = <166666666>;
power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
ospi1: spi@47050000 {
compatible = "ti,am654-ospi", "cdns,qspi-nor";
reg = <0x0 0x47050000 0x0 0x100>,
<0x7 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x0>;
clocks = <&k3_clks 249 6>;
power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
arch/arm64/boot/dts/ti/k3-am65.dtsi
View file @ bd4d5488
......@@ -74,13 +74,18 @@ cbass_main: interconnect@100000 {
/* MCUSS Range */
<0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
<0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
<0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
<0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
cbass_mcu: interconnect@28380000 {
compatible = "simple-bus";
......@@ -88,13 +93,17 @@ cbass_mcu: interconnect@28380000 {
#size-cells = <2>;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
<0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
<0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
cbass_wakeup: interconnect@42040000 {
compatible = "simple-bus";
......
arch/arm64/boot/dts/ti/k3-am654-base-board.dts
View file @ bd4d5488
......@@ -69,6 +69,29 @@ AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
>;
};
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */
AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */
AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */
AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */
AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */
AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */
AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */
AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */
AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
>;
};
wkup_pca554_default: wkup_pca554_default {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
>;
};
};
&main_pmx0 {
......@@ -164,6 +187,12 @@ pca9554: gpio@39 {
reg = <0x39>;
gpio-controller;
#gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&wkup_pca554_default>;
interrupt-parent = <&wkup_gpio0>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
......@@ -339,3 +368,23 @@ &mailbox0_cluster10 {
&mailbox0_cluster11 {
status = "disabled";
};
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
flash@0{
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <8>;
spi-max-frequency = <40000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
View file @ bd4d5488
......@@ -67,6 +67,46 @@ main_usbss1_pins_default: main_usbss1_pins_default {
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
>;
};
main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
>;
};
main_i2c0_pins_default: main-i2c0-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
>;
};
main_i2c1_pins_default: main-i2c1-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
>;
};
main_i2c3_pins_default: main-i2c3-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
>;
};
main_i2c6_pins_default: main-i2c6-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
>;
};
main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
>;
};
};
&wkup_pmx0 {
......@@ -75,6 +115,19 @@ sw11_button_pins_default: sw11_button_pins_default {
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
>;
};
mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
>;
};
};
&wkup_uart0 {
......@@ -279,3 +332,100 @@ &usb1 {
dr_mode = "host";
maximum-speed = "high-speed";
};
&ospi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
flash@0{
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <40000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <2>;
#address-cells = <1>;
#size-cells = <1>;
};
};
&tscadc0 {
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&tscadc1 {
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
exp1: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
exp2: gpio@22 {
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
};
&main_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
exp4: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_exp4_pins_default>;
interrupt-parent = <&main_gpio1>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&main_i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c3_pins_default>;
clock-frequency = <400000>;
exp3: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
&main_i2c6 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c6_pins_default>;
clock-frequency = <400000>;
exp5: gpio@20 {
compatible = "ti,tca6408";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
View file @ bd4d5488
......@@ -43,6 +43,7 @@ gic_its: gic-its@1820000 {
smmu0: smmu@36600000 {
compatible = "arm,smmu-v3";
reg = <0x0 0x36600000 0x0 0x100000>;
power-domains = <&k3_pds 229 TI_SCI_PD_EXCLUSIVE>;
interrupt-parent = <&gic500>;
interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
......@@ -596,4 +597,103 @@ usb1: usb@6400000 {
dr_mode = "otg";
};
};
main_i2c0: i2c@2000000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x2000000 0x0 0x100>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 187 0>;
power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
};
main_i2c1: i2c@2010000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x2010000 0x0 0x100>;
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 188 0>;
power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
};
main_i2c2: i2c@2020000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x2020000 0x0 0x100>;
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 189 0>;
power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
};
main_i2c3: i2c@2030000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x2030000 0x0 0x100>;
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 190 0>;
power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
};
main_i2c4: i2c@2040000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x2040000 0x0 0x100>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 191 0>;
power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
};
main_i2c5: i2c@2050000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x2050000 0x0 0x100>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 192 0>;
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
};
main_i2c6: i2c@2060000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x2060000 0x0 0x100>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 193 0>;
power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
};
ufs_wrapper: ufs-wrapper@4e80000 {
compatible = "ti,j721e-ufs";
reg = <0x0 0x4e80000 0x0 0x100>;
power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 277 1>;
assigned-clocks = <&k3_clks 277 1>;
assigned-clock-parents = <&k3_clks 277 4>;
ranges;
#address-cells = <2>;
#size-cells = <2>;
ufs@4e84000 {
compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
reg = <0x0 0x4e84000 0x0 0x10000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
clock-names = "core_clk", "phy_clk", "ref_clk";
dma-coherent;
};
};
};
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
View file @ bd4d5488
......@@ -121,4 +121,108 @@ wkup_gpio1: gpio@42100000 {
clocks = <&k3_clks 114 0>;
clock-names = "gpio";
};
mcu_i2c0: i2c@40b00000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x40b00000 0x0 0x100>;
interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 194 0>;
power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
};
mcu_i2c1: i2c@40b10000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x40b10000 0x0 0x100>;
interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 195 0>;
power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
};
wkup_i2c0: i2c@42120000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x42120000 0x0 0x100>;
interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 197 0>;
power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
};
fss: fss@47000000 {
compatible = "simple-bus";
reg = <0x0 0x47000000 0x0 0x100>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
ospi0: spi@47040000 {
compatible = "ti,am654-ospi";
reg = <0x0 0x47040000 0x0 0x100>,
<0x5 0x00000000 0x1 0x0000000>;
interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x0>;
clocks = <&k3_clks 103 0>;
assigned-clocks = <&k3_clks 103 0>;
assigned-clock-parents = <&k3_clks 103 2>;
assigned-clock-rates = <166666666>;
power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
ospi1: spi@47050000 {
compatible = "ti,am654-ospi";
reg = <0x0 0x47050000 0x0 0x100>,
<0x7 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x0>;
clocks = <&k3_clks 104 0>;
power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
};
tscadc0: tscadc@40200000 {
compatible = "ti,am3359-tscadc";
reg = <0x0 0x40200000 0x0 0x1000>;
interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 0 1>;
assigned-clocks = <&k3_clks 0 3>;
assigned-clock-rates = <60000000>;
clock-names = "adc_tsc_fck";
adc {
#io-channel-cells = <1>;
compatible = "ti,am3359-adc";
};
};
tscadc1: tscadc@40210000 {
compatible = "ti,am3359-tscadc";
reg = <0x0 0x40210000 0x0 0x1000>;
interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 1 1>;
assigned-clocks = <&k3_clks 1 3>;
assigned-clock-rates = <60000000>;
clock-names = "adc_tsc_fck";
adc {
#io-channel-cells = <1>;
compatible = "ti,am3359-adc";
};
};
};
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
View file @ bd4d5488
......@@ -27,3 +27,48 @@ secure_ddr: optee@9e800000 {
};
};
};
&wkup_pmx0 {
wkup_i2c0_pins_default: wkup_i2c0_pins_default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
>;
};
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */
J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */
J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */
J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */
J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */
J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */
J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */
J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */
J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */
J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
>;
};
};
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
flash@0{
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <8>;
spi-max-frequency = <40000000>;
cdns,tshsl-ns = <60>;
cdns,tsd2d-ns = <60>;
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7