Commit bd70f260 authored by Josh Wu's avatar Josh Wu Committed by Mauro Carvalho Chehab

[media] atmel-isi: add code to setup correct resolution for preview path

Not like codec path, preview path can do downsampling, so we should setup
a extra preview width, height for it.

This patch add preview resolution setup without down sampling. So currently
preview path will output same size as sensor output size.
Signed-off-by: default avatarJosh Wu <josh.wu@atmel.com>
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 0fb72575
......@@ -131,7 +131,7 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi,
static void configure_geometry(struct atmel_isi *isi, u32 width,
u32 height, const struct soc_camera_format_xlate *xlate)
{
u32 cfg2;
u32 cfg2, psize;
/* According to sensor's output format to set cfg2 */
switch (xlate->code) {
......@@ -159,6 +159,16 @@ static void configure_geometry(struct atmel_isi *isi, u32 width,
cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
& ISI_CFG2_IM_VSIZE_MASK;
isi_writel(isi, ISI_CFG2, cfg2);
/* No down sampling, preview size equal to sensor output size */
psize = ((width - 1) << ISI_PSIZE_PREV_HSIZE_OFFSET) &
ISI_PSIZE_PREV_HSIZE_MASK;
psize |= ((height - 1) << ISI_PSIZE_PREV_VSIZE_OFFSET) &
ISI_PSIZE_PREV_VSIZE_MASK;
isi_writel(isi, ISI_PSIZE, psize);
isi_writel(isi, ISI_PDECF, ISI_PDECF_NO_SAMPLING);
return;
}
static bool is_supported(struct soc_camera_device *icd,
......
......@@ -79,6 +79,16 @@
#define ISI_CFG2_IM_VSIZE_MASK (0x7FF << ISI_CFG2_IM_VSIZE_OFFSET)
#define ISI_CFG2_IM_HSIZE_MASK (0x7FF << ISI_CFG2_IM_HSIZE_OFFSET)
/* Bitfields in PSIZE */
#define ISI_PSIZE_PREV_VSIZE_OFFSET 0
#define ISI_PSIZE_PREV_HSIZE_OFFSET 16
#define ISI_PSIZE_PREV_VSIZE_MASK (0x3FF << ISI_PSIZE_PREV_VSIZE_OFFSET)
#define ISI_PSIZE_PREV_HSIZE_MASK (0x3FF << ISI_PSIZE_PREV_HSIZE_OFFSET)
/* Bitfields in PDECF */
#define ISI_PDECF_DEC_FACTOR_MASK (0xFF << 0)
#define ISI_PDECF_NO_SAMPLING (16)
/* Bitfields in CTRL */
/* Also using in SR(ISI_V2) */
#define ISI_CTRL_EN (1 << 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment