mtd: spi-nor: Split mt25qu512a (n25q512a) entry into two

mt25q family is different from n25q family of devices, even though manf
ID and device IDs are same. mt25q flash has bit 6 set in 5th byte of
READ ID response which can be used to distinguish it from n25q variant.
mt25q flashes support stateless 4 Byte addressing opcodes where as n25q
flashes don't. Therefore, have two separate entries for mt25qu512a and
n25q512a.

Fixes: 9607af6f ("mtd: spi-nor: Rename "n25q512a" to "mt25qu512a (n25q512a)"")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

drivers/mtd/spi-nor/spi-nor.c

@@ -2481,15 +2481,16 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+	{ "mt25qu512a",  INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
+			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K |
+			      SPI_NOR_QUAD_READ) },
 	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 	{ "mt25ql02g",   INFO(0x20ba22, 0, 64 * 1024, 4096,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
 			      NO_CHIP_ERASE) },
-	{ "mt25qu512a (n25q512a)", INFO(0x20bb20, 0, 64 * 1024, 1024,
-					SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-					SPI_NOR_QUAD_READ |
-					SPI_NOR_4B_OPCODES) },
 	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 
 	/* Micron */