Commit bd8dc737 authored by Michal Nazarewicz's avatar Michal Nazarewicz Committed by Felipe Balbi

usb: gadget: mv_u3d: fix unused-but-set-variable warnings

This patch fixes the following (W=1) warnings:

drivers/usb/gadget/udc/mv_u3d_core.c: In function ‘mv_u3d_process_ep_req’:
drivers/usb/gadget/udc/mv_u3d_core.c:124:6: warning: variable ‘trb_complete’ set but not used [-Wunused-but-set-variable]
  int trb_complete, actual, remaining_length = 0;
      ^
drivers/usb/gadget/udc/mv_u3d_core.c:123:28: warning: variable ‘curr_ep_context’ set but not used [-Wunused-but-set-variable]
  struct mv_u3d_ep_context *curr_ep_context;
                            ^
drivers/usb/gadget/udc/mv_u3d_core.c:122:13: warning: variable ‘cur_deq_lo’ set but not used [-Wunused-but-set-variable]
  dma_addr_t cur_deq_lo;
             ^
drivers/usb/gadget/udc/mv_u3d_core.c: In function ‘mv_u3d_ep_enable’:
drivers/usb/gadget/udc/mv_u3d_core.c:530:28: warning: variable ‘ep_context’ set but not used [-Wunused-but-set-variable]
  struct mv_u3d_ep_context *ep_context;
                            ^
drivers/usb/gadget/udc/mv_u3d_core.c: In function ‘mv_u3d_ep_disable’:
drivers/usb/gadget/udc/mv_u3d_core.c:636:28: warning: variable ‘ep_context’ set but not used [-Wunused-but-set-variable]
  struct mv_u3d_ep_context *ep_context;
                            ^
In doing so, it removes calls to ioread32 function which does I/O with
the device, but I hope the reads don’t have any side effects that are
needed.
Signed-off-by: default avatarMichal Nazarewicz <mina86@mina86.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent 906ae52d
......@@ -119,18 +119,14 @@ static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
struct mv_u3d_req *curr_req)
{
struct mv_u3d_trb *curr_trb;
dma_addr_t cur_deq_lo;
struct mv_u3d_ep_context *curr_ep_context;
int trb_complete, actual, remaining_length = 0;
int actual, remaining_length = 0;
int direction, ep_num;
int retval = 0;
u32 tmp, status, length;
curr_ep_context = &u3d->ep_context[index];
direction = index % 2;
ep_num = index / 2;
trb_complete = 0;
actual = curr_req->req.length;
while (!list_empty(&curr_req->trb_list)) {
......@@ -143,15 +139,10 @@ static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
}
curr_trb->trb_hw->ctrl.own = 0;
if (direction == MV_U3D_EP_DIR_OUT) {
if (direction == MV_U3D_EP_DIR_OUT)
tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
cur_deq_lo =
ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo);
} else {
else
tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
cur_deq_lo =
ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo);
}
status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
......@@ -527,7 +518,6 @@ static int mv_u3d_ep_enable(struct usb_ep *_ep,
{
struct mv_u3d *u3d;
struct mv_u3d_ep *ep;
struct mv_u3d_ep_context *ep_context;
u16 max = 0;
unsigned maxburst = 0;
u32 epxcr, direction;
......@@ -548,9 +538,6 @@ static int mv_u3d_ep_enable(struct usb_ep *_ep,
_ep->maxburst = 1;
maxburst = _ep->maxburst;
/* Get the endpoint context address */
ep_context = (struct mv_u3d_ep_context *)ep->ep_context;
/* Set the max burst size */
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_BULK:
......@@ -633,7 +620,6 @@ static int mv_u3d_ep_disable(struct usb_ep *_ep)
{
struct mv_u3d *u3d;
struct mv_u3d_ep *ep;
struct mv_u3d_ep_context *ep_context;
u32 epxcr, direction;
unsigned long flags;
......@@ -646,9 +632,6 @@ static int mv_u3d_ep_disable(struct usb_ep *_ep)
u3d = ep->u3d;
/* Get the endpoint context address */
ep_context = ep->ep_context;
direction = mv_u3d_ep_dir(ep);
/* nuke all pending requests (does flush) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment