Commit bd8dd593 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Stephen Boyd

clk: bcm: Add driver for BCM53573 ILP clock

This clock is present on BCM53573 devices (including BCM47189) that use
Cortex-A7. ILP is a part of PMU (Power Management Unit) multi-function
device so we use syscon (and regmap) for it.
Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
Acked-by: default avatarRob Herring <robh@kernel.org>
[sboyd@codeaurora.org: Remove 0 from clk_init_data to silence sparse]
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent dc19b6f5
Broadcom BCM53573 ILP clock
===========================
This binding uses the common clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
This binding is used for ILP clock (sometimes referred as "slow clock")
on Broadcom BCM53573 devices using Cortex-A7 CPU.
ILP's rate has to be calculated on runtime and it depends on ALP clock
which has to be referenced.
This clock is part of PMU (Power Management Unit), a Broadcom's device
handing power-related aspects. Its node must be sub-node of the PMU
device.
Required properties:
- compatible: "brcm,bcm53573-ilp"
- clocks: has to reference an ALP clock
- #clock-cells: should be <0>
- clock-output-names: from common clock bindings, should contain clock
name
Example:
pmu@18012000 {
compatible = "simple-mfd", "syscon";
reg = <0x18012000 0x00001000>;
ilp {
compatible = "brcm,bcm53573-ilp";
clocks = <&alp>;
#clock-cells = <0>;
clock-output-names = "ilp";
};
};
...@@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o ...@@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o
obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o
obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o
/*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#define PMU_XTAL_FREQ_RATIO 0x66c
#define XTAL_ALP_PER_4ILP 0x00001fff
#define XTAL_CTL_EN 0x80000000
#define PMU_SLOW_CLK_PERIOD 0x6dc
struct bcm53573_ilp {
struct clk_hw hw;
struct regmap *regmap;
};
static int bcm53573_ilp_enable(struct clk_hw *hw)
{
struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
regmap_write(ilp->regmap, PMU_SLOW_CLK_PERIOD, 0x10199);
regmap_write(ilp->regmap, 0x674, 0x10000);
return 0;
}
static void bcm53573_ilp_disable(struct clk_hw *hw)
{
struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
regmap_write(ilp->regmap, PMU_SLOW_CLK_PERIOD, 0);
regmap_write(ilp->regmap, 0x674, 0);
}
static unsigned long bcm53573_ilp_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
struct regmap *regmap = ilp->regmap;
u32 last_val, cur_val;
int sum = 0, num = 0, loop_num = 0;
int avg;
/* Enable measurement */
regmap_write(regmap, PMU_XTAL_FREQ_RATIO, XTAL_CTL_EN);
/* Read initial value */
regmap_read(regmap, PMU_XTAL_FREQ_RATIO, &last_val);
last_val &= XTAL_ALP_PER_4ILP;
/*
* At minimum we should loop for a bit to let hardware do the
* measurement. This isn't very accurate however, so for a better
* precision lets try getting 20 different values for and use average.
*/
while (num < 20) {
regmap_read(regmap, PMU_XTAL_FREQ_RATIO, &cur_val);
cur_val &= XTAL_ALP_PER_4ILP;
if (cur_val != last_val) {
/* Got different value, use it */
sum += cur_val;
num++;
loop_num = 0;
last_val = cur_val;
} else if (++loop_num > 5000) {
/* Same value over and over, give up */
sum += cur_val;
num++;
break;
}
cpu_relax();
}
/* Disable measurement to save power */
regmap_write(regmap, PMU_XTAL_FREQ_RATIO, 0x0);
avg = sum / num;
return parent_rate * 4 / avg;
}
static const struct clk_ops bcm53573_ilp_clk_ops = {
.enable = bcm53573_ilp_enable,
.disable = bcm53573_ilp_disable,
.recalc_rate = bcm53573_ilp_recalc_rate,
};
static void bcm53573_ilp_init(struct device_node *np)
{
struct bcm53573_ilp *ilp;
struct clk_init_data init = { };
const char *parent_name;
int err;
ilp = kzalloc(sizeof(*ilp), GFP_KERNEL);
if (!ilp)
return;
parent_name = of_clk_get_parent_name(np, 0);
if (!parent_name) {
err = -ENOENT;
goto err_free_ilp;
}
ilp->regmap = syscon_node_to_regmap(of_get_parent(np));
if (IS_ERR(ilp->regmap)) {
err = PTR_ERR(ilp->regmap);
goto err_free_ilp;
}
init.name = np->name;
init.ops = &bcm53573_ilp_clk_ops;
init.parent_names = &parent_name;
init.num_parents = 1;
ilp->hw.init = &init;
err = clk_hw_register(NULL, &ilp->hw);
if (err)
goto err_free_ilp;
err = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &ilp->hw);
if (err)
goto err_clk_hw_unregister;
return;
err_clk_hw_unregister:
clk_hw_unregister(&ilp->hw);
err_free_ilp:
kfree(ilp);
pr_err("Failed to init ILP clock: %d\n", err);
}
/* We need it very early for arch code, before device model gets ready */
CLK_OF_DECLARE(bcm53573_ilp_clk, "brcm,bcm53573-ilp", bcm53573_ilp_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment