HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspend

After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.

This is caused by commit f645a90e ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.

But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.

To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.

Fixes: f645a90e ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

drivers/hid/intel-ish-hid/ishtp/bus.c

@@ -722,6 +722,8 @@ void ishtp_bus_remove_all_clients(struct ishtp_device *ishtp_dev,
 	spin_lock_irqsave(&ishtp_dev->cl_list_lock, flags);
 	list_for_each_entry(cl, &ishtp_dev->cl_list, link) {
 		cl->state = ISHTP_CL_DISCONNECTED;
+		if (warm_reset && cl->device->reference_count)
+			continue;
 
 		/*
 		 * Wake any pending process. The waiter would check dev->state

drivers/hid/intel-ish-hid/ishtp/client.c

@@ -49,7 +49,9 @@ static void ishtp_read_list_flush(struct ishtp_cl *cl)
 	list_for_each_entry_safe(rb, next, &cl->dev->read_list.list, list)
 		if (rb->cl && ishtp_cl_cmp_id(cl, rb->cl)) {
 			list_del(&rb->list);
-			ishtp_io_rb_free(rb);
+			spin_lock(&cl->free_list_spinlock);
+			list_add_tail(&rb->list, &cl->free_rb_list.list);
+			spin_unlock(&cl->free_list_spinlock);
 		}
 	spin_unlock_irqrestore(&cl->dev->read_list_spinlock, flags);
 }