Commit bdcb1aef authored by Nicholas Piggin's avatar Nicholas Piggin Committed by Michael Ellerman

powerpc/64s: Improve RFI L1-D cache flush fallback

The fallback RFI flush is used when firmware does not provide a way
to flush the cache. It's a "displacement flush" that evicts useful
data by displacing it with an uninteresting buffer.

The flush has to take care to work with implementation specific cache
replacment policies, so the recipe has been in flux. The initial
slow but conservative approach is to touch all lines of a congruence
class, with dependencies between each load. It has since been
determined that a linear pattern of loads without dependencies is
sufficient, and is significantly faster.

Measuring the speed of a null syscall with RFI fallback flush enabled
gives the relative improvement:

P8 - 1.83x
P9 - 1.75x

The flush also becomes simpler and more adaptable to different cache
geometries.
Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 35adacd6
......@@ -239,8 +239,7 @@ struct paca_struct {
*/
u64 exrfi[EX_SIZE] __aligned(0x80);
void *rfi_flush_fallback_area;
u64 l1d_flush_congruence;
u64 l1d_flush_sets;
u64 l1d_flush_size;
#endif
};
......
......@@ -239,8 +239,7 @@ int main(void)
OFFSET(PACA_IN_NMI, paca_struct, in_nmi);
OFFSET(PACA_RFI_FLUSH_FALLBACK_AREA, paca_struct, rfi_flush_fallback_area);
OFFSET(PACA_EXRFI, paca_struct, exrfi);
OFFSET(PACA_L1D_FLUSH_CONGRUENCE, paca_struct, l1d_flush_congruence);
OFFSET(PACA_L1D_FLUSH_SETS, paca_struct, l1d_flush_sets);
OFFSET(PACA_L1D_FLUSH_SIZE, paca_struct, l1d_flush_size);
#endif
OFFSET(PACAHWCPUID, paca_struct, hw_cpu_id);
......
......@@ -1461,39 +1461,37 @@ TRAMP_REAL_BEGIN(rfi_flush_fallback)
std r9,PACA_EXRFI+EX_R9(r13)
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
std r12,PACA_EXRFI+EX_R12(r13)
std r8,PACA_EXRFI+EX_R13(r13)
mfctr r9
ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
ld r11,PACA_L1D_FLUSH_SETS(r13)
ld r12,PACA_L1D_FLUSH_CONGRUENCE(r13)
/*
* The load adresses are at staggered offsets within cachelines,
* which suits some pipelines better (on others it should not
* hurt).
*/
addi r12,r12,8
ld r11,PACA_L1D_FLUSH_SIZE(r13)
srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
mtctr r11
DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
/* order ld/st prior to dcbt stop all streams with flushing */
sync
1: li r8,0
.rept 8 /* 8-way set associative */
ldx r11,r10,r8
add r8,r8,r12
xor r11,r11,r11 // Ensure r11 is 0 even if fallback area is not
add r8,r8,r11 // Add 0, this creates a dependency on the ldx
.endr
addi r10,r10,128 /* 128 byte cache line */
/*
* The load adresses are at staggered offsets within cachelines,
* which suits some pipelines better (on others it should not
* hurt).
*/
1:
ld r11,(0x80 + 8)*0(r10)
ld r11,(0x80 + 8)*1(r10)
ld r11,(0x80 + 8)*2(r10)
ld r11,(0x80 + 8)*3(r10)
ld r11,(0x80 + 8)*4(r10)
ld r11,(0x80 + 8)*5(r10)
ld r11,(0x80 + 8)*6(r10)
ld r11,(0x80 + 8)*7(r10)
addi r10,r10,0x80*8
bdnz 1b
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
ld r11,PACA_EXRFI+EX_R11(r13)
ld r12,PACA_EXRFI+EX_R12(r13)
ld r8,PACA_EXRFI+EX_R13(r13)
GET_SCRATCH0(r13);
rfid
......@@ -1503,39 +1501,37 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback)
std r9,PACA_EXRFI+EX_R9(r13)
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
std r12,PACA_EXRFI+EX_R12(r13)
std r8,PACA_EXRFI+EX_R13(r13)
mfctr r9
ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
ld r11,PACA_L1D_FLUSH_SETS(r13)
ld r12,PACA_L1D_FLUSH_CONGRUENCE(r13)
/*
* The load adresses are at staggered offsets within cachelines,
* which suits some pipelines better (on others it should not
* hurt).
*/
addi r12,r12,8
ld r11,PACA_L1D_FLUSH_SIZE(r13)
srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
mtctr r11
DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
/* order ld/st prior to dcbt stop all streams with flushing */
sync
1: li r8,0
.rept 8 /* 8-way set associative */
ldx r11,r10,r8
add r8,r8,r12
xor r11,r11,r11 // Ensure r11 is 0 even if fallback area is not
add r8,r8,r11 // Add 0, this creates a dependency on the ldx
.endr
addi r10,r10,128 /* 128 byte cache line */
/*
* The load adresses are at staggered offsets within cachelines,
* which suits some pipelines better (on others it should not
* hurt).
*/
1:
ld r11,(0x80 + 8)*0(r10)
ld r11,(0x80 + 8)*1(r10)
ld r11,(0x80 + 8)*2(r10)
ld r11,(0x80 + 8)*3(r10)
ld r11,(0x80 + 8)*4(r10)
ld r11,(0x80 + 8)*5(r10)
ld r11,(0x80 + 8)*6(r10)
ld r11,(0x80 + 8)*7(r10)
addi r10,r10,0x80*8
bdnz 1b
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
ld r11,PACA_EXRFI+EX_R11(r13)
ld r12,PACA_EXRFI+EX_R12(r13)
ld r8,PACA_EXRFI+EX_R13(r13)
GET_SCRATCH0(r13);
hrfid
......
......@@ -875,19 +875,8 @@ static void init_fallback_flush(void)
memset(l1d_flush_fallback_area, 0, l1d_size * 2);
for_each_possible_cpu(cpu) {
/*
* The fallback flush is currently coded for 8-way
* associativity. Different associativity is possible, but it
* will be treated as 8-way and may not evict the lines as
* effectively.
*
* 128 byte lines are mandatory.
*/
u64 c = l1d_size / 8;
paca[cpu].rfi_flush_fallback_area = l1d_flush_fallback_area;
paca[cpu].l1d_flush_congruence = c;
paca[cpu].l1d_flush_sets = c / 128;
paca[cpu].l1d_flush_size = l1d_size;
}
}
......
......@@ -2377,8 +2377,6 @@ static void dump_one_paca(int cpu)
printf(" slb_cache[%d]: = 0x%016lx\n", i, p->slb_cache[i]);
DUMP(p, rfi_flush_fallback_area, "px");
DUMP(p, l1d_flush_congruence, "llx");
DUMP(p, l1d_flush_sets, "llx");
#endif
DUMP(p, dscr_default, "llx");
#ifdef CONFIG_PPC_BOOK3E
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment