USB: serial: spcp8x5: simplify endpoint check

Simplify the endpoint sanity check by letting core verify that the
required endpoints are present.
Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/spcp8x5.c

@@ -154,19 +154,6 @@ static int spcp8x5_probe(struct usb_serial *serial,
 	return 0;
 }
 
-static int spcp8x5_attach(struct usb_serial *serial)
-{
-	unsigned char num_ports = serial->num_ports;
-
-	if (serial->num_bulk_in < num_ports ||
-			serial->num_bulk_out < num_ports) {
-		dev_err(&serial->interface->dev, "missing endpoints\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
 	const struct usb_device_id *id = usb_get_serial_data(port->serial);
@@ -488,6 +475,8 @@ static struct usb_serial_driver spcp8x5_device = {
 	},
 	.id_table		= id_table,
 	.num_ports		= 1,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
 	.open			= spcp8x5_open,
 	.dtr_rts		= spcp8x5_dtr_rts,
 	.carrier_raised		= spcp8x5_carrier_raised,
@@ -496,7 +485,6 @@ static struct usb_serial_driver spcp8x5_device = {
 	.tiocmget		= spcp8x5_tiocmget,
 	.tiocmset		= spcp8x5_tiocmset,
 	.probe			= spcp8x5_probe,
-	.attach			= spcp8x5_attach,
 	.port_probe		= spcp8x5_port_probe,
 	.port_remove		= spcp8x5_port_remove,
 };