Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: vme: Re-introduce necessary brackets
  Staging: iio: fix up the iio_get_new_idr_val comment
  Staging: add Add Sitecom WL-349 to rtl8192su
  Staging: rt2860: add Belkin F5D8055 Wireless-N USB Dongle device id
  staging: rtl8192su: add Support for Belkin F5D8053 v6
  Staging: dt3155: fix 50Hz configuration
  staging: usbip: Fix deadlock
  Staging: rtl8192su: add USB ID for 0bda:8171
  Staging: hv: name network device ethX rather than sethX
  Staging: hv: Fix up memory leak on HvCleanup
  Staging: hv: Fix a bug affecting IPv6
  staging: iio: ring_sw: Fix incorrect test on successful read of last value, causes infinite loop
  staging: iio: Function iio_get_new_idr_val() return negative value if fails.
  Staging: iio: adc: fix dangling pointers
  Staging: iio: light: fix dangling pointers
  Staging: iio: test for failed allocation
  staging: iio: lis3l02dq - incorrect ws used in container of call.

drivers/staging/dt3155/dt3155_drv.c

@@ -464,9 +464,9 @@ static void dt3155_init_isr(int minor)
   /* 50/60 Hz should be set before this point but let's make sure it is */
   /* right anyway */
 
-  ReadI2C(dt3155_lbase[ minor ], CONFIG, &i2c_csr2.reg);
+  ReadI2C(dt3155_lbase[ minor ], CSR2, &i2c_csr2.reg);
   i2c_csr2.fld.HZ50 = FORMAT50HZ;
-  WriteI2C(dt3155_lbase[ minor ], CONFIG, i2c_config.reg);
+  WriteI2C(dt3155_lbase[ minor ], CSR2, i2c_csr2.reg);
 
   /* enable busmaster chip, clear flags */
 

drivers/staging/hv/Hv.c

@@ -306,9 +306,9 @@ void HvCleanup(void)
 	DPRINT_ENTER(VMBUS);
 
 	if (gHvContext.SignalEventBuffer) {
+		kfree(gHvContext.SignalEventBuffer);
 		gHvContext.SignalEventBuffer = NULL;
 		gHvContext.SignalEventParam = NULL;
-		kfree(gHvContext.SignalEventBuffer);
 	}
 
 	if (gHvContext.HypercallPage) {

drivers/staging/hv/RndisFilter.c

@@ -751,6 +751,7 @@ static int RndisFilterOpenDevice(struct rndis_device *Device)
 
 	ret = RndisFilterSetPacketFilter(Device,
 					 NDIS_PACKET_TYPE_BROADCAST |
+					 NDIS_PACKET_TYPE_ALL_MULTICAST |
 					 NDIS_PACKET_TYPE_DIRECTED);
 	if (ret == 0)
 		Device->State = RNDIS_DEV_DATAINITIALIZED;

drivers/staging/hv/netvsc_drv.c

@@ -403,8 +403,7 @@ static int netvsc_probe(struct device *device)
 	if (!net_drv_obj->Base.OnDeviceAdd)
 		return -1;
 
-	net = alloc_netdev(sizeof(struct net_device_context), "seth%d",
-			   ether_setup);
+	net = alloc_etherdev(sizeof(struct net_device_context));
 	if (!net)
 		return -1;
 

drivers/staging/iio/accel/lis3l02dq_core.c

@@ -618,7 +618,7 @@ static int lis3l02dq_thresh_handler_th(struct iio_dev *dev_info,
 static void lis3l02dq_thresh_handler_bh_no_check(struct work_struct *work_s)
 {
 	struct iio_work_cont *wc
-		= container_of(work_s, struct iio_work_cont, ws_nocheck);
+		= container_of(work_s, struct iio_work_cont, ws);
 	struct lis3l02dq_state *st = wc->st;
 	u8 t;
 

drivers/staging/iio/accel/lis3l02dq_ring.c

@@ -493,6 +493,9 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
 	struct lis3l02dq_state *state = indio_dev->dev_data;
 
 	state->trig = iio_allocate_trigger();
+	if (!state->trig)
+		return -ENOMEM;
+
 	state->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
 	if (!state->trig->name) {
 		ret = -ENOMEM;

drivers/staging/iio/adc/max1363_core.c

@@ -557,6 +557,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 error_free_st:
+	i2c_set_clientdata(client, NULL);
 	kfree(st);
 
 error_ret:
@@ -574,6 +575,7 @@ static int max1363_remove(struct i2c_client *client)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
+	i2c_set_clientdata(client, NULL);
 	kfree(st);
 
 	return 0;

drivers/staging/iio/industrialio-core.c

@@ -537,6 +537,7 @@ static void iio_device_unregister_sysfs(struct iio_dev *dev_info)
 	sysfs_remove_group(&dev_info->dev.kobj, dev_info->attrs);
 }
 
+/* Return a negative errno on failure */
 int iio_get_new_idr_val(struct idr *this_idr)
 {
 	int ret;
@@ -660,7 +661,7 @@ static int iio_device_register_eventset(struct iio_dev *dev_info)
 	for (i = 0; i < dev_info->num_interrupt_lines; i++) {
 		dev_info->event_interfaces[i].owner = dev_info->driver_module;
 		ret = iio_get_new_idr_val(&iio_event_idr);
-		if (ret)
+		if (ret < 0)
 			goto error_free_setup_ev_ints;
 		else
 			dev_info->event_interfaces[i].id = ret;

drivers/staging/iio/light/tsl2563.c

@@ -682,6 +682,7 @@ static int __devinit tsl2563_probe(struct i2c_client *client,
 fail2:
 	iio_device_unregister(chip->indio_dev);
 fail1:
+	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return err;
 }
@@ -692,6 +693,7 @@ static int tsl2563_remove(struct i2c_client *client)
 
 	iio_device_unregister(chip->indio_dev);
 
+	i2c_set_clientdata(client, NULL);
 	kfree(chip);
 	return 0;
 }

drivers/staging/iio/ring_sw.c

@@ -293,7 +293,7 @@ int iio_read_last_from_sw_ring(struct iio_sw_ring_buffer *ring,
 		return -EAGAIN;
 	memcpy(data, last_written_p_copy, ring->buf.bpd);
 
-	if (unlikely(ring->last_written_p >= last_written_p_copy))
+	if (unlikely(ring->last_written_p != last_written_p_copy))
 		goto again;
 
 	iio_unmark_sw_rb_in_use(&ring->buf);

drivers/staging/rt2860/usb_main_dev.c

@@ -63,6 +63,7 @@ struct usb_device_id rtusb_usb_id[] = {
 	{USB_DEVICE(0x07D1, 0x3C11)},	/* D-Link */
 	{USB_DEVICE(0x14B2, 0x3C07)},	/* AL */
 	{USB_DEVICE(0x050D, 0x8053)},	/* Belkin */
+	{USB_DEVICE(0x050D, 0x825B)},	/* Belkin */
 	{USB_DEVICE(0x14B2, 0x3C23)},	/* Airlink */
 	{USB_DEVICE(0x14B2, 0x3C27)},	/* Airlink */
 	{USB_DEVICE(0x07AA, 0x002F)},	/* Corega */

drivers/staging/rtl8192su/r8192U_core.c

@@ -113,14 +113,17 @@ u32 rt_global_debug_component = \
 
 static const struct usb_device_id rtl8192_usb_id_tbl[] = {
 	/* Realtek */
+	{USB_DEVICE(0x0bda, 0x8171)},
 	{USB_DEVICE(0x0bda, 0x8192)},
 	{USB_DEVICE(0x0bda, 0x8709)},
 	/* Corega */
 	{USB_DEVICE(0x07aa, 0x0043)},
 	/* Belkin */
 	{USB_DEVICE(0x050d, 0x805E)},
+	{USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
 	/* Sitecom */
 	{USB_DEVICE(0x0df6, 0x0031)},
+	{USB_DEVICE(0x0df6, 0x004b)},	/* WL-349 */
 	/* EnGenius */
 	{USB_DEVICE(0x1740, 0x9201)},
 	/* Dlink */

drivers/staging/usbip/usbip_event.c

@@ -117,6 +117,9 @@ void usbip_stop_eh(struct usbip_device *ud)
 {
 	struct usbip_task *eh = &ud->eh;
 
+	if (eh->thread == current)
+		return; /* do not wait for myself */
+
 	wait_for_completion(&eh->thread_done);
 	usbip_dbg_eh("usbip_eh has finished\n");
 }

drivers/staging/vme/bridges/vme_tsi148.c

@@ -2455,9 +2455,10 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	dev_info(&pdev->dev, "VME Write and flush and error check is %s\n",
 		err_chk ? "enabled" : "disabled");
 
-	if (tsi148_crcsr_init(tsi148_bridge, pdev))
+	if (tsi148_crcsr_init(tsi148_bridge, pdev)) {
 		dev_err(&pdev->dev, "CR/CSR configuration failed.\n");
 		goto err_crcsr;
+	}
 
 	retval = vme_register_bridge(tsi148_bridge);
 	if (retval != 0) {