Commit be129fab authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev

Pull fbdev fixes from Helge Deller:
 "Two bug fixes for the pxa3xx and intelfb drivers:

   - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

   - intelfb: Initialize value of stolen size

  The other changes are small cleanups, simplifications and
  documentation updates to the cirrusfb, skeletonfb, omapfb,
  intelfb, au1100fb and simplefb drivers"

* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: omap: Remove duplicate 'the' in comment
  video: fbdev: omapfb: Align '*' in comment
  video: fbdev: simplefb: Check before clk_put() not needed
  video: fbdev: au1100fb: Drop unnecessary NULL ptr check
  video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
  video: fbdev: skeletonfb: Convert to generic power management
  video: fbdev: cirrusfb: Remove useless reference to PCI power management
  video: fbdev: intelfb: Initialize value of stolen size
  video: fbdev: intelfb: Use aperture size from pci_resource_len
  video: fbdev: skeletonfb: Fix syntax errors in comments
parents c0c6a7bd cb517733
......@@ -560,8 +560,7 @@ int au1100fb_drv_suspend(struct platform_device *dev, pm_message_t state)
/* Blank the LCD */
au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
if (fbdev->lcdclk)
clk_disable(fbdev->lcdclk);
clk_disable(fbdev->lcdclk);
memcpy(&fbregs, fbdev->regs, sizeof(struct au1100fb_regs));
......@@ -577,8 +576,7 @@ int au1100fb_drv_resume(struct platform_device *dev)
memcpy(fbdev->regs, &fbregs, sizeof(struct au1100fb_regs));
if (fbdev->lcdclk)
clk_enable(fbdev->lcdclk);
clk_enable(fbdev->lcdclk);
/* Unblank the LCD */
au1100fb_fb_blank(VESA_NO_BLANKING, &fbdev->info);
......
......@@ -2184,12 +2184,6 @@ static struct pci_driver cirrusfb_pci_driver = {
.id_table = cirrusfb_pci_table,
.probe = cirrusfb_pci_register,
.remove = cirrusfb_pci_unregister,
#ifdef CONFIG_PM
#if 0
.suspend = cirrusfb_pci_suspend,
.resume = cirrusfb_pci_resume,
#endif
#endif
};
#endif /* CONFIG_PCI */
......
......@@ -472,7 +472,7 @@ static int intelfb_pci_register(struct pci_dev *pdev,
struct fb_info *info;
struct intelfb_info *dinfo;
int i, err, dvo;
int aperture_size, stolen_size;
int aperture_size, stolen_size = 0;
struct agp_kern_info gtt_info;
int agp_memtype;
const char *s;
......@@ -571,7 +571,7 @@ static int intelfb_pci_register(struct pci_dev *pdev,
return -ENODEV;
}
if (intelfbhw_get_memory(pdev, &aperture_size,&stolen_size)) {
if (intelfbhw_get_memory(pdev, &aperture_size, &stolen_size)) {
cleanup(dinfo);
return -ENODEV;
}
......
......@@ -201,13 +201,11 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
case PCI_DEVICE_ID_INTEL_945GME:
case PCI_DEVICE_ID_INTEL_965G:
case PCI_DEVICE_ID_INTEL_965GM:
/* 915, 945 and 965 chipsets support a 256MB aperture.
Aperture size is determined by inspected the
base address of the aperture. */
if (pci_resource_start(pdev, 2) & 0x08000000)
*aperture_size = MB(128);
else
*aperture_size = MB(256);
/*
* 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
* aperture. Determine size from PCI resource length.
*/
*aperture_size = pci_resource_len(pdev, 2);
break;
default:
if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
......
......@@ -359,7 +359,7 @@ static void sossi_set_bits_per_cycle(int bpc)
int bus_pick_count, bus_pick_width;
/*
* We set explicitly the the bus_pick_count as well, although
* We set explicitly the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
......
......@@ -143,7 +143,7 @@ int hdmi_phy_configure(struct hdmi_phy_data *phy, unsigned long hfbitclk,
/*
* In OMAP5+, the HFBITCLK must be divided by 2 before issuing the
* HDMI_PHYPWRCMD_LDOON command.
*/
*/
if (phy_feat->bist_ctrl)
REG_FLD_MOD(phy->base, HDMI_TXPHY_BIST_CONTROL, 1, 11, 11);
......
......@@ -381,7 +381,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff,
struct pxa3xx_gcu_batch *buffer;
struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
int words = count / 4;
size_t words = count / 4;
/* Does not need to be atomic. There's a lock in user space,
* but anyhow, this is just for statistics. */
......
......@@ -237,8 +237,7 @@ static int simplefb_clocks_get(struct simplefb_par *par,
if (IS_ERR(clock)) {
if (PTR_ERR(clock) == -EPROBE_DEFER) {
while (--i >= 0) {
if (par->clks[i])
clk_put(par->clks[i]);
clk_put(par->clks[i]);
}
kfree(par->clks);
return -EPROBE_DEFER;
......
......@@ -96,7 +96,7 @@ static const struct fb_fix_screeninfo xxxfb_fix = {
/*
* Modern graphical hardware not only supports pipelines but some
* also support multiple monitors where each display can have its
* also support multiple monitors where each display can have
* its own unique data. In this case each display could be
* represented by a separate framebuffer device thus a separate
* struct fb_info. Now the struct xxx_par represents the graphics
......@@ -838,9 +838,9 @@ static void xxxfb_remove(struct pci_dev *dev)
*
* See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
static int xxxfb_suspend(struct device *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
struct fb_info *info = dev_get_drvdata(dev);
struct xxxfb_par *par = info->par;
/* suspend here */
......@@ -853,9 +853,9 @@ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
*
* See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_resume(struct pci_dev *dev)
static int xxxfb_resume(struct device *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
struct fb_info *info = dev_get_drvdata(dev);
struct xxxfb_par *par = info->par;
/* resume here */
......@@ -873,14 +873,15 @@ static const struct pci_device_id xxxfb_id_table[] = {
{ 0, }
};
static SIMPLE_DEV_PM_OPS(xxxfb_pm_ops, xxxfb_suspend, xxxfb_resume);
/* For PCI drivers */
static struct pci_driver xxxfb_driver = {
.name = "xxxfb",
.id_table = xxxfb_id_table,
.probe = xxxfb_probe,
.remove = xxxfb_remove,
.suspend = xxxfb_suspend, /* optional but recommended */
.resume = xxxfb_resume, /* optional but recommended */
.driver.pm = xxxfb_pm_ops, /* optional but recommended */
};
MODULE_DEVICE_TABLE(pci, xxxfb_id_table);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment