Commit be18c5ed authored by Asmaa Mnebhi's avatar Asmaa Mnebhi Committed by Wolfram Sang

i2c: mlxbf: remove device tree support

BlueField customers have to use the BlueField firmware with
UEFI ACPI tables so there is no need to have device tree
support in the i2c-mlxbf.c driver. Remove the device tree
binding documentation as well.
Signed-off-by: default avatarAsmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: default avatarKhalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: default avatarWolfram Sang <wsa@kernel.org>
parent 19e13e13
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/mellanox,i2c-mlxbf.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mellanox I2C SMBus on BlueField SoCs
maintainers:
- Khalil Blaiech <kblaiech@nvidia.com>
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
properties:
compatible:
enum:
- mellanox,i2c-mlxbf1
- mellanox,i2c-mlxbf2
reg:
minItems: 3
items:
- description: Smbus block registers
- description: Cause master registers
- description: Cause slave registers
- description: Cause coalesce registers
interrupts:
maxItems: 1
clock-frequency:
enum: [ 100000, 400000, 1000000 ]
description:
bus frequency used to configure timing registers;
The frequency is expressed in Hz. Default is 100000.
required:
- compatible
- reg
- interrupts
unevaluatedProperties: false
if:
properties:
compatible:
contains:
enum:
- mellanox,i2c-mlxbf1
then:
properties:
reg:
maxItems: 3
examples:
- |
i2c@2804000 {
compatible = "mellanox,i2c-mlxbf1";
reg = <0x02804000 0x800>,
<0x02801200 0x020>,
<0x02801260 0x020>;
interrupts = <57>;
clock-frequency = <100000>;
};
- |
i2c@2808800 {
compatible = "mellanox,i2c-mlxbf2";
reg = <0x02808800 0x600>,
<0x02808e00 0x020>,
<0x02808e20 0x020>,
<0x02808e40 0x010>;
interrupts = <57>;
clock-frequency = <400000>;
};
......@@ -12987,7 +12987,6 @@ M: Khalil Blaiech <kblaiech@nvidia.com>
M: Asmaa Mnebhi <asmaa@nvidia.com>
L: linux-i2c@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
F: drivers/i2c/busses/i2c-mlxbf.c
MELLANOX ETHERNET DRIVER (mlx4_en)
......
......@@ -2247,24 +2247,6 @@ static struct i2c_adapter_quirks mlxbf_i2c_quirks = {
.max_write_len = MLXBF_I2C_MASTER_DATA_W_LENGTH,
};
static const struct of_device_id mlxbf_i2c_dt_ids[] = {
{
.compatible = "mellanox,i2c-mlxbf1",
.data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1]
},
{
.compatible = "mellanox,i2c-mlxbf2",
.data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2]
},
{
.compatible = "mellanox,i2c-mlxbf3",
.data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_3]
},
{},
};
MODULE_DEVICE_TABLE(of, mlxbf_i2c_dt_ids);
#ifdef CONFIG_ACPI
static const struct acpi_device_id mlxbf_i2c_acpi_ids[] = {
{ "MLNXBF03", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1] },
......@@ -2315,31 +2297,6 @@ static int mlxbf_i2c_acpi_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
}
#endif /* CONFIG_ACPI */
static int mlxbf_i2c_of_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
{
const struct of_device_id *oid;
int bus_id = -1;
if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
oid = of_match_node(mlxbf_i2c_dt_ids, dev->of_node);
if (!oid)
return -ENODEV;
priv->chip = oid->data;
bus_id = of_alias_get_id(dev->of_node, "i2c");
if (bus_id >= 0)
priv->bus = bus_id;
}
if (bus_id < 0) {
dev_err(dev, "Cannot get bus id");
return bus_id;
}
return 0;
}
static int mlxbf_i2c_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
......@@ -2353,14 +2310,11 @@ static int mlxbf_i2c_probe(struct platform_device *pdev)
return -ENOMEM;
ret = mlxbf_i2c_acpi_probe(dev, priv);
if (ret < 0 && ret != -ENOENT && ret != -ENXIO)
ret = mlxbf_i2c_of_probe(dev, priv);
if (ret < 0)
return ret;
/* This property allows the driver to stay backward compatible with older
* ACPI table and device trees versions.
* ACPI tables.
* Starting BlueField-3 SoC, the "smbus" resource was broken down into 3
* separate resources "timer", "master" and "slave".
*/
......@@ -2544,7 +2498,6 @@ static struct platform_driver mlxbf_i2c_driver = {
.remove = mlxbf_i2c_remove,
.driver = {
.name = "i2c-mlxbf",
.of_match_table = mlxbf_i2c_dt_ids,
#ifdef CONFIG_ACPI
.acpi_match_table = ACPI_PTR(mlxbf_i2c_acpi_ids),
#endif /* CONFIG_ACPI */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment