nfit, tools/testing/nvdimm: add format interface code definitions

ACPI 6.1 and JEDEC Annex L Release 3 formalize the format interface
code.  Add definitions and update their usage in the unit test.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/acpi/nfit.h

@@ -40,6 +40,12 @@ enum nfit_uuids {
 	NFIT_UUID_MAX,
 };
 
+enum nfit_fic {
+	NFIT_FIC_BYTE = 0x101, /* byte-addressable energy backed */
+	NFIT_FIC_BLK = 0x201, /* block-addressable non-energy backed */
+	NFIT_FIC_BYTEN = 0x301, /* byte-addressable non-energy backed */
+};
+
 enum {
 	ND_BLK_READ_FLUSH = 1,
 	ND_BLK_DCR_LATCH = 2,

tools/testing/nvdimm/test/nfit.c

@@ -823,6 +823,7 @@ static void nfit_test0_setup(struct nfit_test *t)
 	dcr->device_id = 0;
 	dcr->revision_id = 1;
 	dcr->serial_number = ~handle[0];
+	dcr->code = NFIT_FIC_BLK;
 	dcr->windows = 1;
 	dcr->window_size = DCR_SIZE;
 	dcr->command_offset = 0;
@@ -839,6 +840,7 @@ static void nfit_test0_setup(struct nfit_test *t)
 	dcr->device_id = 0;
 	dcr->revision_id = 1;
 	dcr->serial_number = ~handle[1];
+	dcr->code = NFIT_FIC_BLK;
 	dcr->windows = 1;
 	dcr->window_size = DCR_SIZE;
 	dcr->command_offset = 0;
@@ -855,6 +857,7 @@ static void nfit_test0_setup(struct nfit_test *t)
 	dcr->device_id = 0;
 	dcr->revision_id = 1;
 	dcr->serial_number = ~handle[2];
+	dcr->code = NFIT_FIC_BLK;
 	dcr->windows = 1;
 	dcr->window_size = DCR_SIZE;
 	dcr->command_offset = 0;
@@ -871,6 +874,7 @@ static void nfit_test0_setup(struct nfit_test *t)
 	dcr->device_id = 0;
 	dcr->revision_id = 1;
 	dcr->serial_number = ~handle[3];
+	dcr->code = NFIT_FIC_BLK;
 	dcr->windows = 1;
 	dcr->window_size = DCR_SIZE;
 	dcr->command_offset = 0;
@@ -967,6 +971,7 @@ static void nfit_test0_setup(struct nfit_test *t)
 		dcr->device_id = 0;
 		dcr->revision_id = 1;
 		dcr->serial_number = ~handle[4];
+		dcr->code = NFIT_FIC_BLK;
 		dcr->windows = 1;
 		dcr->window_size = DCR_SIZE;
 		dcr->command_offset = 0;
@@ -1136,7 +1141,7 @@ static void nfit_test1_setup(struct nfit_test *t)
 	dcr->device_id = 0;
 	dcr->revision_id = 1;
 	dcr->serial_number = ~0;
-	dcr->code = 0x201;
+	dcr->code = NFIT_FIC_BYTE;
 	dcr->windows = 0;
 	dcr->window_size = 0;
 	dcr->command_offset = 0;