Merge branch 'mptcp-selftest-improvements-and-header-tweak'

Mat Martineau says:

====================
mptcp: Self test improvements and a header tweak

Patch 1 moves a definition to a header so it can be used in a struct
declaration.

Patch 2 adjusts a time threshold for a selftest that runs much slower on
debug kernels (and even more on slow CI infrastructure), to reduce
spurious failures.

Patches 3 & 4 improve userspace PM test coverage.

Patches 5 & 6 clean up output from a test script and selftest helper
tool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

include/net/mptcp.h

@@ -39,6 +39,7 @@ struct mptcp_ext {
 			infinite_map:1;
 };
 
+#define MPTCPOPT_HMAC_LEN	20
 #define MPTCP_RM_IDS_MAX	8
 
 struct mptcp_rm_list {
@@ -89,7 +90,7 @@ struct mptcp_out_options {
 			u32 nonce;
 			u32 token;
 			u64 thmac;
-			u8 hmac[20];
+			u8 hmac[MPTCPOPT_HMAC_LEN];
 		};
 	};
 #endif

net/mptcp/protocol.h

@@ -83,7 +83,6 @@
 
 /* MPTCP MP_JOIN flags */
 #define MPTCPOPT_BACKUP		BIT(0)
-#define MPTCPOPT_HMAC_LEN	20
 #define MPTCPOPT_THMAC_LEN	8
 
 /* MPTCP MP_CAPABLE flags */

tools/testing/selftests/net/mptcp/mptcp_join.sh

@@ -455,6 +455,12 @@ wait_mpj()
 	done
 }
 
+kill_wait()
+{
+	kill $1 > /dev/null 2>&1
+	wait $1 2>/dev/null
+}
+
 pm_nl_set_limits()
 {
 	local ns=$1
@@ -654,6 +660,11 @@ do_transfer()
 
 	local port=$((10000 + TEST_COUNT - 1))
 	local cappid
+	local userspace_pm=0
+	local evts_ns1
+	local evts_ns1_pid
+	local evts_ns2
+	local evts_ns2_pid
 
 	:> "$cout"
 	:> "$sout"
@@ -690,10 +701,29 @@ do_transfer()
 		extra_args="-r ${speed:6}"
 	fi
 
+	if [[ "${addr_nr_ns1}" = "userspace_"* ]]; then
+		userspace_pm=1
+		addr_nr_ns1=${addr_nr_ns1:10}
+	fi
+
 	if [[ "${addr_nr_ns2}" = "fastclose_"* ]]; then
 		# disconnect
 		extra_args="$extra_args -I ${addr_nr_ns2:10}"
 		addr_nr_ns2=0
+	elif [[ "${addr_nr_ns2}" = "userspace_"* ]]; then
+		userspace_pm=1
+		addr_nr_ns2=${addr_nr_ns2:10}
+	fi
+
+	if [ $userspace_pm -eq 1 ]; then
+		evts_ns1=$(mktemp)
+		evts_ns2=$(mktemp)
+		:> "$evts_ns1"
+		:> "$evts_ns2"
+		ip netns exec ${listener_ns} ./pm_nl_ctl events >> "$evts_ns1" 2>&1 &
+		evts_ns1_pid=$!
+		ip netns exec ${connector_ns} ./pm_nl_ctl events >> "$evts_ns2" 2>&1 &
+		evts_ns2_pid=$!
 	fi
 
 	local local_addr
@@ -748,6 +778,8 @@ do_transfer()
 	if [ $addr_nr_ns1 -gt 0 ]; then
 		local counter=2
 		local add_nr_ns1=${addr_nr_ns1}
+		local id=10
+		local tk
 		while [ $add_nr_ns1 -gt 0 ]; do
 			local addr
 			if is_v6 "${connect_addr}"; then
@@ -755,9 +787,18 @@ do_transfer()
 			else
 				addr="10.0.$counter.1"
 			fi
-			pm_nl_add_endpoint $ns1 $addr flags signal
+			if [ $userspace_pm -eq 0 ]; then
+				pm_nl_add_endpoint $ns1 $addr flags signal
+			else
+				tk=$(sed -n 's/.*\(token:\)\([[:digit:]]*\).*$/\2/p;q' "$evts_ns1")
+				ip netns exec ${listener_ns} ./pm_nl_ctl ann $addr token $tk id $id
+				sleep 1
+				ip netns exec ${listener_ns} ./pm_nl_ctl rem token $tk id $id
+			fi
+
 			counter=$((counter + 1))
 			add_nr_ns1=$((add_nr_ns1 - 1))
+			id=$((id + 1))
 		done
 	elif [ $addr_nr_ns1 -lt 0 ]; then
 		local rm_nr_ns1=$((-addr_nr_ns1))
@@ -804,6 +845,8 @@ do_transfer()
 	if [ $addr_nr_ns2 -gt 0 ]; then
 		local add_nr_ns2=${addr_nr_ns2}
 		local counter=3
+		local id=20
+		local tk da dp sp
 		while [ $add_nr_ns2 -gt 0 ]; do
 			local addr
 			if is_v6 "${connect_addr}"; then
@@ -811,9 +854,23 @@ do_transfer()
 			else
 				addr="10.0.$counter.2"
 			fi
-			pm_nl_add_endpoint $ns2 $addr flags $flags
+			if [ $userspace_pm -eq 0 ]; then
+				pm_nl_add_endpoint $ns2 $addr flags $flags
+			else
+				tk=$(sed -n 's/.*\(token:\)\([[:digit:]]*\).*$/\2/p;q' "$evts_ns2")
+				da=$(sed -n 's/.*\(daddr4:\)\([0-9.]*\).*$/\2/p;q' "$evts_ns2")
+				dp=$(sed -n 's/.*\(dport:\)\([[:digit:]]*\).*$/\2/p;q' "$evts_ns2")
+				ip netns exec ${connector_ns} ./pm_nl_ctl csf lip $addr lid $id \
+									rip $da rport $dp token $tk
+				sleep 1
+				sp=$(grep "type:10" "$evts_ns2" |
+				     sed -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q')
+				ip netns exec ${connector_ns} ./pm_nl_ctl dsf lip $addr lport $sp \
+									rip $da rport $dp token $tk
+			fi
 			counter=$((counter + 1))
 			add_nr_ns2=$((add_nr_ns2 - 1))
+			id=$((id + 1))
 		done
 	elif [ $addr_nr_ns2 -lt 0 ]; then
 		local rm_nr_ns2=$((-addr_nr_ns2))
@@ -890,6 +947,12 @@ do_transfer()
 	    kill $cappid
 	fi
 
+	if [ $userspace_pm -eq 1 ]; then
+		kill_wait $evts_ns1_pid
+		kill_wait $evts_ns2_pid
+		rm -rf $evts_ns1 $evts_ns2
+	fi
+
 	NSTAT_HISTORY=/tmp/${listener_ns}.nstat ip netns exec ${listener_ns} \
 		nstat | grep Tcp > /tmp/${listener_ns}.out
 	NSTAT_HISTORY=/tmp/${connector_ns}.nstat ip netns exec ${connector_ns} \
@@ -2810,6 +2873,25 @@ userspace_tests()
 		chk_join_nr 0 0 0
 		chk_rm_nr 0 0
 	fi
+
+	# userspace pm add & remove address
+	if reset "userspace pm add & remove address"; then
+		set_userspace_pm $ns1
+		pm_nl_set_limits $ns2 1 1
+		run_tests $ns1 $ns2 10.0.1.1 0 userspace_1 0 slow
+		chk_join_nr 1 1 1
+		chk_add_nr 1 1
+		chk_rm_nr 1 1 invert
+	fi
+
+	# userspace pm create destroy subflow
+	if reset "userspace pm create destroy subflow"; then
+		set_userspace_pm $ns2
+		pm_nl_set_limits $ns1 0 1
+		run_tests $ns1 $ns2 10.0.1.1 0 0 userspace_1 slow
+		chk_join_nr 1 1 1
+		chk_rm_nr 0 1
+	fi
 }
 
 endpoint_tests()

tools/testing/selftests/net/mptcp/pm_nl_ctl.c

@@ -31,7 +31,7 @@
 
 static void syntax(char *argv[])
 {
-	fprintf(stderr, "%s add|get|set|del|flush|dump|accept [<args>]\n", argv[0]);
+	fprintf(stderr, "%s add|ann|rem|csf|dsf|get|set|del|flush|dump|events|listen|accept [<args>]\n", argv[0]);
 	fprintf(stderr, "\tadd [flags signal|subflow|backup|fullmesh] [id <nr>] [dev <name>] <ip>\n");
 	fprintf(stderr, "\tann <local-ip> id <local-id> token <token> [port <local-port>] [dev <name>]\n");
 	fprintf(stderr, "\trem id <local-id> token <token>\n");

tools/testing/selftests/net/mptcp/simult_flows.sh

@@ -12,6 +12,7 @@ timeout_test=$((timeout_poll * 2 + 1))
 test_cnt=1
 ret=0
 bail=0
+slack=50
 
 usage() {
 	echo "Usage: $0 [ -b ] [ -c ] [ -d ]"
@@ -52,6 +53,7 @@ setup()
 	cout=$(mktemp)
 	capout=$(mktemp)
 	size=$((2 * 2048 * 4096))
+
 	dd if=/dev/zero of=$small bs=4096 count=20 >/dev/null 2>&1
 	dd if=/dev/zero of=$large bs=4096 count=$((size / 4096)) >/dev/null 2>&1
 
@@ -104,6 +106,16 @@ setup()
 	ip -net "$ns3" route add default via dead:beef:3::2
 
 	ip netns exec "$ns3" ./pm_nl_ctl limits 1 1
+
+	# debug build can slow down measurably the test program
+	# we use quite tight time limit on the run-time, to ensure
+	# maximum B/W usage.
+	# Use kmemleak/lockdep/kasan/prove_locking presence as a rough
+	# estimate for this being a debug kernel and increase the
+	# maximum run-time accordingly. Observed run times for CI builds
+	# running selftests, including kbuild, were used to determine the
+	# amount of time to add.
+	grep -q ' kmemleak_init$\| lockdep_init$\| kasan_init$\| prove_locking$' /proc/kallsyms && slack=$((slack+550))
 }
 
 # $1: ns, $2: port
@@ -241,7 +253,7 @@ run_test()
 
 	# mptcp_connect will do some sleeps to allow the mp_join handshake
 	# completion (see mptcp_connect): 200ms on each side, add some slack
-	time=$((time + 450))
+	time=$((time + 400 + slack))
 
 	printf "%-60s" "$msg"
 	do_transfer $small $large $time

tools/testing/selftests/net/mptcp/userspace_pm.sh

@@ -37,6 +37,12 @@ rndh=$(stdbuf -o0 -e0 printf %x "$sec")-$(mktemp -u XXXXXX)
 ns1="ns1-$rndh"
 ns2="ns2-$rndh"
 
+kill_wait()
+{
+	kill $1 > /dev/null 2>&1
+	wait $1 2>/dev/null
+}
+
 cleanup()
 {
 	echo "cleanup"
@@ -48,16 +54,16 @@ cleanup()
 		kill -SIGUSR1 $client4_pid > /dev/null 2>&1
 	fi
 	if [ $server4_pid -ne 0 ]; then
-		kill $server4_pid > /dev/null 2>&1
+		kill_wait $server4_pid
 	fi
 	if [ $client6_pid -ne 0 ]; then
 		kill -SIGUSR1 $client6_pid > /dev/null 2>&1
 	fi
 	if [ $server6_pid -ne 0 ]; then
-		kill $server6_pid > /dev/null 2>&1
+		kill_wait $server6_pid
 	fi
 	if [ $evts_pid -ne 0 ]; then
-		kill $evts_pid > /dev/null 2>&1
+		kill_wait $evts_pid
 	fi
 	local netns
 	for netns in "$ns1" "$ns2" ;do
@@ -153,7 +159,7 @@ make_connection()
 	sleep 1
 
 	# Capture client/server attributes from MPTCP connection netlink events
-	kill $client_evts_pid
+	kill_wait $client_evts_pid
 
 	local client_token
 	local client_port
@@ -165,7 +171,7 @@ make_connection()
 	client_port=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$client_evts")
 	client_serverside=$(sed --unbuffered -n 's/.*\(server_side:\)\([[:digit:]]*\).*$/\2/p;q'\
 				      "$client_evts")
-	kill $server_evts_pid
+	kill_wait $server_evts_pid
 	server_token=$(sed --unbuffered -n 's/.*\(token:\)\([[:digit:]]*\).*$/\2/p;q' "$server_evts")
 	server_serverside=$(sed --unbuffered -n 's/.*\(server_side:\)\([[:digit:]]*\).*$/\2/p;q'\
 				      "$server_evts")
@@ -286,7 +292,7 @@ test_announce()
 	verify_announce_event "$evts" "$ANNOUNCED" "$server4_token" "10.0.2.2"\
 			      "$client_addr_id" "$new4_port"
 
-	kill $evts_pid
+	kill_wait $evts_pid
 
 	# Capture events on the network namespace running the client
 	:>"$evts"
@@ -321,7 +327,7 @@ test_announce()
 	verify_announce_event "$evts" "$ANNOUNCED" "$client4_token" "10.0.2.1"\
 			      "$server_addr_id" "$new4_port"
 
-	kill $evts_pid
+	kill_wait $evts_pid
 	rm -f "$evts"
 }
 
@@ -416,7 +422,7 @@ test_remove()
 	sleep 0.5
 	verify_remove_event "$evts" "$REMOVED" "$server6_token" "$client_addr_id"
 
-	kill $evts_pid
+	kill_wait $evts_pid
 
 	# Capture events on the network namespace running the client
 	:>"$evts"
@@ -449,7 +455,7 @@ test_remove()
 	sleep 0.5
 	verify_remove_event "$evts" "$REMOVED" "$client6_token" "$server_addr_id"
 
-	kill $evts_pid
+	kill_wait $evts_pid
 	rm -f "$evts"
 }
 
@@ -553,7 +559,7 @@ test_subflows()
 			      "10.0.2.2" "$client4_port" "23" "$client_addr_id" "ns1" "ns2"
 
 	# Delete the listener from the client ns, if one was created
-	kill $listener_pid > /dev/null 2>&1
+	kill_wait $listener_pid
 
 	local sport
 	sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$evts")
@@ -592,7 +598,7 @@ test_subflows()
 			      "$client_addr_id" "ns1" "ns2"
 
 	# Delete the listener from the client ns, if one was created
-	kill $listener_pid > /dev/null 2>&1
+	kill_wait $listener_pid
 
 	sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$evts")
 
@@ -631,7 +637,7 @@ test_subflows()
 			      "$client_addr_id" "ns1" "ns2"
 
 	# Delete the listener from the client ns, if one was created
-	kill $listener_pid > /dev/null 2>&1
+	kill_wait $listener_pid
 
 	sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$evts")
 
@@ -647,7 +653,7 @@ test_subflows()
 	ip netns exec "$ns2" ./pm_nl_ctl rem id $client_addr_id token\
 	   "$client4_token" > /dev/null 2>&1
 
-	kill $evts_pid
+	kill_wait $evts_pid
 
 	# Capture events on the network namespace running the client
 	:>"$evts"
@@ -674,7 +680,7 @@ test_subflows()
 			      "10.0.2.1" "$app4_port" "23" "$server_addr_id" "ns2" "ns1"
 
 	# Delete the listener from the server ns, if one was created
-	kill $listener_pid> /dev/null 2>&1
+	kill_wait $listener_pid
 
 	sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$evts")
 
@@ -713,7 +719,7 @@ test_subflows()
 			      "$server_addr_id" "ns2" "ns1"
 
 	# Delete the listener from the server ns, if one was created
-	kill $listener_pid > /dev/null 2>&1
+	kill_wait $listener_pid
 
 	sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$evts")
 
@@ -750,7 +756,7 @@ test_subflows()
 			      "10.0.2.2" "10.0.2.1" "$new4_port" "23" "$server_addr_id" "ns2" "ns1"
 
 	# Delete the listener from the server ns, if one was created
-	kill $listener_pid > /dev/null 2>&1
+	kill_wait $listener_pid
 
 	sport=$(sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q' "$evts")
 
@@ -766,7 +772,7 @@ test_subflows()
 	ip netns exec "$ns1" ./pm_nl_ctl rem id $server_addr_id token\
 	   "$server4_token" > /dev/null 2>&1
 
-	kill $evts_pid
+	kill_wait $evts_pid
 	rm -f "$evts"
 }