Commit be66fcc1 authored by Heiner Kallweit's avatar Heiner Kallweit Committed by David S. Miller

net: phy: meson-gxl: reuse functionality of the SMSC PHY driver

The Amlogic Meson internal PHY's have the same register layout as
certain SMSC PHY's (also for non-c22-standard registers). This seems
to be more than just coincidence. Apparently they also need the same
workaround for EDPD mode (energy detect power down). Therefore let's
reuse SMSC PHY driver functionality in the meson-gxl PHY driver.

Tested with a G12A internal PHY. I don't have GXL test hw,
therefore I replace only the callbacks that are identical in
the SMSC PHY driver.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a69e332b
......@@ -70,6 +70,7 @@ config AMD_PHY
config MESON_GXL_PHY
tristate "Amlogic Meson GXL Internal PHY"
depends on ARCH_MESON || COMPILE_TEST
select SMSC_PHY
help
Currently has a driver for the Amlogic Meson GXL Internal PHY
......
......@@ -13,6 +13,7 @@
#include <linux/phy.h>
#include <linux/netdevice.h>
#include <linux/bitfield.h>
#include <linux/smscphy.h>
#define TSTCNTL 20
#define TSTCNTL_READ BIT(15)
......@@ -23,18 +24,6 @@
#define TSTCNTL_WRITE_ADDRESS GENMASK(4, 0)
#define TSTREAD1 21
#define TSTWRITE 23
#define INTSRC_FLAG 29
#define INTSRC_ANEG_PR BIT(1)
#define INTSRC_PARALLEL_FAULT BIT(2)
#define INTSRC_ANEG_LP_ACK BIT(3)
#define INTSRC_LINK_DOWN BIT(4)
#define INTSRC_REMOTE_FAULT BIT(5)
#define INTSRC_ANEG_COMPLETE BIT(6)
#define INTSRC_ENERGY_DETECT BIT(7)
#define INTSRC_MASK 30
#define INT_SOURCES (INTSRC_LINK_DOWN | INTSRC_ANEG_COMPLETE | \
INTSRC_ENERGY_DETECT)
#define BANK_ANALOG_DSP 0
#define BANK_WOL 1
......@@ -195,59 +184,6 @@ static int meson_gxl_read_status(struct phy_device *phydev)
return genphy_read_status(phydev);
}
static int meson_gxl_ack_interrupt(struct phy_device *phydev)
{
int ret = phy_read(phydev, INTSRC_FLAG);
return ret < 0 ? ret : 0;
}
static int meson_gxl_config_intr(struct phy_device *phydev)
{
int ret;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
/* Ack any pending IRQ */
ret = meson_gxl_ack_interrupt(phydev);
if (ret)
return ret;
ret = phy_write(phydev, INTSRC_MASK, INT_SOURCES);
} else {
ret = phy_write(phydev, INTSRC_MASK, 0);
/* Ack any pending IRQ */
ret = meson_gxl_ack_interrupt(phydev);
}
return ret;
}
static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev)
{
int irq_status;
irq_status = phy_read(phydev, INTSRC_FLAG);
if (irq_status < 0) {
phy_error(phydev);
return IRQ_NONE;
}
irq_status &= INT_SOURCES;
if (irq_status == 0)
return IRQ_NONE;
/* Aneg-complete interrupt is used for link-up detection */
if (phydev->autoneg == AUTONEG_ENABLE &&
irq_status == INTSRC_ENERGY_DETECT)
return IRQ_HANDLED;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
}
static struct phy_driver meson_gxl_phy[] = {
{
PHY_ID_MATCH_EXACT(0x01814400),
......@@ -257,8 +193,8 @@ static struct phy_driver meson_gxl_phy[] = {
.soft_reset = genphy_soft_reset,
.config_init = meson_gxl_config_init,
.read_status = meson_gxl_read_status,
.config_intr = meson_gxl_config_intr,
.handle_interrupt = meson_gxl_handle_interrupt,
.config_intr = smsc_phy_config_intr,
.handle_interrupt = smsc_phy_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
......@@ -268,9 +204,12 @@ static struct phy_driver meson_gxl_phy[] = {
.name = "Meson G12A Internal PHY",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
.probe = smsc_phy_probe,
.config_init = smsc_phy_config_init,
.soft_reset = genphy_soft_reset,
.config_intr = meson_gxl_config_intr,
.handle_interrupt = meson_gxl_handle_interrupt,
.read_status = lan87xx_read_status,
.config_intr = smsc_phy_config_intr,
.handle_interrupt = smsc_phy_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment