Commit bea36afa authored by Takashi Sakamoto's avatar Takashi Sakamoto Committed by Takashi Iwai

ALSA: firewire-motu: add message parser to gather meter information in register DSP model

Some of MOTU models allows software to configure their DSP parameters by
accessing to their registers. The models multiplex messages for status of
DSP into isochronous packet as well as PCM frames. The message includes
information of hardware metering, MIDI message, current parameters of DSP.
For my convenience, I call them as 'register DSP' model.

This patch adds message parser for them to gather hardware meter
information.
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-2-o-takashi@sakamocchi.jpSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent c18c4966
......@@ -108,4 +108,39 @@ struct snd_firewire_tascam_state {
__be32 data[SNDRV_FIREWIRE_TASCAM_STATE_COUNT];
};
// In below MOTU models, software is allowed to control their DSP by accessing to registers.
// - 828mk2
// - 896hd
// - Traveler
// - 8 pre
// - Ultralite
// - 4 pre
// - Audio Express
//
// On the other hand, the status of DSP is split into specific messages included in the sequence of
// isochronous packet. ALSA firewire-motu driver gathers the messages and allow userspace applications
// to read it via ioctl. In 828mk2, 896hd, and Traveler, hardware meter for all of physical inputs
// are put into the message, while one pair of physical outputs is selected. The selection is done by
// LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c.
//
// I note that V3HD/V4HD uses asynchronous transaction for the purpose. The destination address is
// registered to 0x'ffff'f000'0b38 and '0b3c by asynchronous write quadlet request. The size of
// message differs between 23 and 51 quadlets. For the case, the number of mixer bus can be extended
// up to 12.
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT 40
/**
* struct snd_firewire_motu_register_dsp_meter - the container for meter information in DSP
* controlled by register access
* @data: Signal level meters. The mapping between position and input/output channel is
* model-dependent.
*
* The structure expresses the part of DSP status for hardware meter. The u8 storage includes linear
* value for audio signal level between 0x00 and 0x7f.
*/
struct snd_firewire_motu_register_dsp_meter {
__u8 data[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT];
};
#endif /* _UAPI_SOUND_FIREWIRE_H_INCLUDED */
......@@ -4,5 +4,5 @@ CFLAGS_amdtp-motu.o := -I$(src)
snd-firewire-motu-objs := motu.o amdtp-motu.o motu-transaction.o motu-stream.o \
motu-proc.o motu-pcm.o motu-midi.o motu-hwdep.o \
motu-protocol-v2.o motu-protocol-v3.o \
motu-protocol-v1.o
motu-protocol-v1.o motu-register-dsp-message-parser.o
obj-$(CONFIG_SND_FIREWIRE_MOTU) += snd-firewire-motu.o
......@@ -333,6 +333,7 @@ static unsigned int process_ir_ctx_payloads(struct amdtp_stream *s,
unsigned int packets,
struct snd_pcm_substream *pcm)
{
struct snd_motu *motu = container_of(s, struct snd_motu, tx_stream);
struct amdtp_motu *p = s->protocol;
unsigned int pcm_frames = 0;
int i;
......@@ -357,6 +358,11 @@ static unsigned int process_ir_ctx_payloads(struct amdtp_stream *s,
read_midi_messages(s, buf, data_blocks);
}
if (motu->spec->flags & SND_MOTU_SPEC_REGISTER_DSP) {
snd_motu_register_dsp_message_parser_parse(motu, descs, packets,
s->data_block_quadlets);
}
// For tracepoints.
if (trace_data_block_sph_enabled() ||
trace_data_block_message_enabled())
......
......@@ -275,7 +275,8 @@ const struct snd_motu_spec snd_motu_spec_828mk2 = {
.name = "828mk2",
.protocol_version = SND_MOTU_PROTOCOL_V2,
.flags = SND_MOTU_SPEC_RX_MIDI_2ND_Q |
SND_MOTU_SPEC_TX_MIDI_2ND_Q,
SND_MOTU_SPEC_TX_MIDI_2ND_Q |
SND_MOTU_SPEC_REGISTER_DSP,
.tx_fixed_pcm_chunks = {14, 14, 0},
.rx_fixed_pcm_chunks = {14, 14, 0},
};
......@@ -283,7 +284,7 @@ const struct snd_motu_spec snd_motu_spec_828mk2 = {
const struct snd_motu_spec snd_motu_spec_896hd = {
.name = "896HD",
.protocol_version = SND_MOTU_PROTOCOL_V2,
// No support for MIDI.
.flags = SND_MOTU_SPEC_REGISTER_DSP,
.tx_fixed_pcm_chunks = {14, 14, 8},
.rx_fixed_pcm_chunks = {14, 14, 8},
};
......@@ -292,7 +293,8 @@ const struct snd_motu_spec snd_motu_spec_traveler = {
.name = "Traveler",
.protocol_version = SND_MOTU_PROTOCOL_V2,
.flags = SND_MOTU_SPEC_RX_MIDI_2ND_Q |
SND_MOTU_SPEC_TX_MIDI_2ND_Q,
SND_MOTU_SPEC_TX_MIDI_2ND_Q |
SND_MOTU_SPEC_REGISTER_DSP,
.tx_fixed_pcm_chunks = {14, 14, 8},
.rx_fixed_pcm_chunks = {14, 14, 8},
};
......@@ -301,7 +303,8 @@ const struct snd_motu_spec snd_motu_spec_ultralite = {
.name = "UltraLite",
.protocol_version = SND_MOTU_PROTOCOL_V2,
.flags = SND_MOTU_SPEC_RX_MIDI_2ND_Q |
SND_MOTU_SPEC_TX_MIDI_2ND_Q,
SND_MOTU_SPEC_TX_MIDI_2ND_Q |
SND_MOTU_SPEC_REGISTER_DSP,
.tx_fixed_pcm_chunks = {14, 14, 0},
.rx_fixed_pcm_chunks = {14, 14, 0},
};
......@@ -310,7 +313,8 @@ const struct snd_motu_spec snd_motu_spec_8pre = {
.name = "8pre",
.protocol_version = SND_MOTU_PROTOCOL_V2,
.flags = SND_MOTU_SPEC_RX_MIDI_2ND_Q |
SND_MOTU_SPEC_TX_MIDI_2ND_Q,
SND_MOTU_SPEC_TX_MIDI_2ND_Q |
SND_MOTU_SPEC_REGISTER_DSP,
// Two dummy chunks always in the end of data block.
.tx_fixed_pcm_chunks = {10, 10, 0},
.rx_fixed_pcm_chunks = {6, 6, 0},
......
......@@ -293,7 +293,8 @@ const struct snd_motu_spec snd_motu_spec_audio_express = {
.name = "AudioExpress",
.protocol_version = SND_MOTU_PROTOCOL_V3,
.flags = SND_MOTU_SPEC_RX_MIDI_2ND_Q |
SND_MOTU_SPEC_TX_MIDI_3RD_Q,
SND_MOTU_SPEC_TX_MIDI_3RD_Q |
SND_MOTU_SPEC_REGISTER_DSP,
.tx_fixed_pcm_chunks = {10, 10, 0},
.rx_fixed_pcm_chunks = {10, 10, 0},
};
......@@ -301,6 +302,7 @@ const struct snd_motu_spec snd_motu_spec_audio_express = {
const struct snd_motu_spec snd_motu_spec_4pre = {
.name = "4pre",
.protocol_version = SND_MOTU_PROTOCOL_V3,
.flags = SND_MOTU_SPEC_REGISTER_DSP,
.tx_fixed_pcm_chunks = {10, 10, 0},
.rx_fixed_pcm_chunks = {10, 10, 0},
};
// SPDX-License-Identifier: GPL-2.0-only
//
// motu-register-dsp-message-parser.c - a part of driver for MOTU FireWire series
//
// Copyright (c) 2021 Takashi Sakamoto <o-takashi@sakamocchi.jp>
// Below models allow software to configure their DSP functions by asynchronous transaction
// to access their internal registers.
// * 828 mk2
// * 896hd
// * Traveler
// * 8 pre
// * Ultralite
// * 4 pre
// * Audio Express
//
// Additionally, isochronous packets from the above models include messages to notify state of
// DSP. The messages are two set of 3 byte data in 2nd and 3rd quadlet of data block. When user
// operates hardware components such as dial and switch, corresponding messages are transferred.
// The messages include Hardware metering and MIDI messages as well.
#include "motu.h"
#define MSG_FLAG_POS 4
#define MSG_FLAG_TYPE_MASK 0xf8
#define MSG_FLAG_MIDI_MASK 0x01
#define MSG_FLAG_MODEL_SPECIFIC_MASK 0x06
#define MSG_FLAG_8PRE 0x00
#define MSG_FLAG_ULTRALITE 0x04
#define MSG_FLAG_TRAVELER 0x04
#define MSG_FLAG_828MK2 0x04
#define MSG_FLAG_896HD 0x04
#define MSG_FLAG_4PRE 0x05 // MIDI mask is in 8th byte.
#define MSG_FLAG_AUDIOEXPRESS 0x05 // MIDI mask is in 8th byte.
#define MSG_FLAG_TYPE_SHIFT 3
#define MSG_VALUE_POS 5
#define MSG_MIDI_BYTE_POS 6
#define MSG_METER_IDX_POS 7
// In 4 pre and Audio express, meter index is in 6th byte. MIDI flag is in 8th byte and MIDI byte
// is in 7th byte.
#define MSG_METER_IDX_POS_4PRE_AE 6
#define MSG_MIDI_BYTE_POS_4PRE_AE 7
#define MSG_FLAG_MIDI_POS_4PRE_AE 8
enum register_dsp_msg_type {
// Used for messages with no information.
INVALID = 0x00,
MIXER_SELECT = 0x01,
MIXER_SRC_GAIN = 0x02,
MIXER_SRC_PAN = 0x03,
MIXER_SRC_FLAG = 0x04,
MIXER_OUTPUT_PAIRED_VOLUME = 0x05,
MIXER_OUTPUT_PAIRED_FLAG = 0x06,
MAIN_OUTPUT_PAIRED_VOLUME = 0x07,
HP_OUTPUT_PAIRED_VOLUME = 0x08,
HP_OUTPUT_ASSIGN = 0x09,
// Transferred by all models but the purpose is still unknown.
UNKNOWN_0 = 0x0a,
// Specific to 828mk2, 896hd, Traveler.
UNKNOWN_2 = 0x0c,
// Specific to 828mk2, Traveler, and 896hd (not functional).
LINE_INPUT_BOOST = 0x0d,
// Specific to 828mk2, Traveler, and 896hd (not functional).
LINE_INPUT_NOMINAL_LEVEL = 0x0e,
// Specific to Ultralite, 4 pre, Audio express, and 8 pre (not functional).
INPUT_GAIN_AND_INVERT = 0x15,
// Specific to 4 pre, and Audio express.
INPUT_FLAG = 0x16,
// Specific to 4 pre, and Audio express.
MIXER_SRC_PAIRED_BALANCE = 0x17,
// Specific to 4 pre, and Audio express.
MIXER_SRC_PAIRED_WIDTH = 0x18,
// Transferred by all models. This type of message interposes the series of the other
// messages. The message delivers signal level up to 96.0 kHz. In 828mk2, 896hd, and
// Traveler, one of physical outputs is selected for the message. The selection is done
// by LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c.
METER = 0x1f,
};
struct msg_parser {
struct snd_firewire_motu_register_dsp_meter meter;
bool meter_pos_quirk;
};
int snd_motu_register_dsp_message_parser_new(struct snd_motu *motu)
{
struct msg_parser *parser;
parser = devm_kzalloc(&motu->card->card_dev, sizeof(*parser), GFP_KERNEL);
if (!parser)
return -ENOMEM;
if (motu->spec == &snd_motu_spec_4pre || motu->spec == &snd_motu_spec_audio_express)
parser->meter_pos_quirk = true;
motu->message_parser = parser;
return 0;
}
int snd_motu_register_dsp_message_parser_init(struct snd_motu *motu)
{
return 0;
}
void snd_motu_register_dsp_message_parser_parse(struct snd_motu *motu, const struct pkt_desc *descs,
unsigned int desc_count, unsigned int data_block_quadlets)
{
struct msg_parser *parser = motu->message_parser;
bool meter_pos_quirk = parser->meter_pos_quirk;
int i;
for (i = 0; i < desc_count; ++i) {
const struct pkt_desc *desc = descs + i;
__be32 *buffer = desc->ctx_payload;
unsigned int data_blocks = desc->data_blocks;
int j;
for (j = 0; j < data_blocks; ++j) {
u8 *b = (u8 *)buffer;
u8 msg_type = (b[MSG_FLAG_POS] & MSG_FLAG_TYPE_MASK) >> MSG_FLAG_TYPE_SHIFT;
u8 val = b[MSG_VALUE_POS];
buffer += data_block_quadlets;
switch (msg_type) {
case METER:
{
u8 pos;
if (!meter_pos_quirk)
pos = b[MSG_METER_IDX_POS];
else
pos = b[MSG_METER_IDX_POS_4PRE_AE];
if (pos < 0x80)
pos &= 0x1f;
else
pos = (pos & 0x1f) + 20;
parser->meter.data[pos] = val;
break;
}
default:
break;
}
}
}
}
......@@ -255,6 +255,12 @@ int snd_motu_stream_start_duplex(struct snd_motu *motu)
if (err < 0)
return err;
if (motu->spec->flags & SND_MOTU_SPEC_REGISTER_DSP) {
err = snd_motu_register_dsp_message_parser_init(motu);
if (err < 0)
return err;
}
err = begin_session(motu);
if (err < 0) {
dev_err(&motu->unit->device,
......
......@@ -112,6 +112,12 @@ static int motu_probe(struct fw_unit *unit, const struct ieee1394_device_id *ent
if (err < 0)
goto error;
if (motu->spec->flags & SND_MOTU_SPEC_REGISTER_DSP) {
err = snd_motu_register_dsp_message_parser_new(motu);
if (err < 0)
goto error;
}
err = snd_card_register(card);
if (err < 0)
goto error;
......
......@@ -78,6 +78,8 @@ struct snd_motu {
struct amdtp_domain domain;
struct amdtp_motu_cache cache;
void *message_parser;
};
enum snd_motu_spec_flags {
......@@ -85,6 +87,7 @@ enum snd_motu_spec_flags {
SND_MOTU_SPEC_RX_MIDI_3RD_Q = 0x0002,
SND_MOTU_SPEC_TX_MIDI_2ND_Q = 0x0004,
SND_MOTU_SPEC_TX_MIDI_3RD_Q = 0x0008,
SND_MOTU_SPEC_REGISTER_DSP = 0x0010,
};
#define SND_MOTU_CLOCK_RATE_COUNT 6
......@@ -270,4 +273,9 @@ static inline int snd_motu_protocol_cache_packet_formats(struct snd_motu *motu)
return -ENXIO;
}
int snd_motu_register_dsp_message_parser_new(struct snd_motu *motu);
int snd_motu_register_dsp_message_parser_init(struct snd_motu *motu);
void snd_motu_register_dsp_message_parser_parse(struct snd_motu *motu, const struct pkt_desc *descs,
unsigned int desc_count, unsigned int data_block_quadlets);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment