Merge tag 'dt-exynos-for-v3.10' of...

Merge tag 'dt-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt2

update device tree for exynos4 and exynos5

* tag 'dt-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (125 commits)
  ARM: dts: add PDMA0 changes for exynos5440
  ARM: dts: Add cpufreq controller node for Exynos5440 SoC
  ARM: dts: Fix gmac clock ids due to changes in Exynos5440
  ARM: dts: add device tree file for SD5v1 board
  ARM: dts: update bootargs to boot from sda2 for exynos5440-ssdk5440
  ARM: dts: add PMU support in exynos5440
  ARM: dts: Add node for GMAC for exynos5440
  ARM: dts: list the interrupts generated by pin-controller on Exynos5440
  ARM: dts: Add FIMD DT binding Documentation
  ARM: dts: Add FIMD node and display timing node to exynos4412-origen.dts
  ARM: dts: Add FIMD node to exynos4
  ARM: dts: Add SYSREG block node for S5P/Exynos4 SoC series
  ARM: dts: Add display timing node to exynos5250-smdk5250.dts
  ARM: dts: Add FIMD node to exynos5
  ARM: dts: Add virtual GIC DT bindings for exynos5440
  ARM: dts: Document usb clocks in samsung,exynos4210-ehci/ohci bindings
  ARM: dts: add usb 2.0 clock references to exynos5250 device tree
  ARM: dts: Add architected timer nodes for exynos5250
  ARM: dts: Declare the gic as a15 compatible for exynos5250
  ARM: dts: Add HDMI HPD and regulator node for Arndale board
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/samsung/sysreg.txt

+SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
+
+Properties:
+ - name : should be 'sysreg';
+ - compatible : should contain "samsung,<chip name>-sysreg", "syscon";
+   For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
+ - reg : offset and length of the register set.

Documentation/devicetree/bindings/clock/exynos4-clock.txt

+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+  - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+
+		 [Core Clocks]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  xxti                1
+  xusbxti             2
+  fin_pll             3
+  fout_apll           4
+  fout_mpll           5
+  fout_epll           6
+  fout_vpll           7
+  sclk_apll           8
+  sclk_mpll           9
+  sclk_epll           10
+  sclk_vpll           11
+  arm_clk             12
+  aclk200             13
+  aclk100             14
+  aclk160             15
+  aclk133             16
+  mout_mpll_user_t    17      Exynos4x12
+  mout_mpll_user_c    18      Exynos4x12
+  mout_core           19
+  mout_apll           20
+
+
+            [Clock Gate for Special Clocks]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  sclk_fimc0          128
+  sclk_fimc1          129
+  sclk_fimc2          130
+  sclk_fimc3          131
+  sclk_cam0           132
+  sclk_cam1           133
+  sclk_csis0          134
+  sclk_csis1          135
+  sclk_hdmi           136
+  sclk_mixer          137
+  sclk_dac            138
+  sclk_pixel          139
+  sclk_fimd0          140
+  sclk_mdnie0         141     Exynos4412
+  sclk_mdnie_pwm0 12  142     Exynos4412
+  sclk_mipi0          143
+  sclk_audio0         144
+  sclk_mmc0           145
+  sclk_mmc1           146
+  sclk_mmc2           147
+  sclk_mmc3           148
+  sclk_mmc4           149
+  sclk_sata           150     Exynos4210
+  sclk_uart0          151
+  sclk_uart1          152
+  sclk_uart2          153
+  sclk_uart3          154
+  sclk_uart4          155
+  sclk_audio1         156
+  sclk_audio2         157
+  sclk_spdif          158
+  sclk_spi0           159
+  sclk_spi1           160
+  sclk_spi2           161
+  sclk_slimbus        162
+  sclk_fimd1          163     Exynos4210
+  sclk_mipi1          164     Exynos4210
+  sclk_pcm1           165
+  sclk_pcm2           166
+  sclk_i2s1           167
+  sclk_i2s2           168
+  sclk_mipihsi        169     Exynos4412
+  sclk_mfc            170
+  sclk_pcm0           171
+  sclk_g3d            172
+  sclk_pwm_isp        173     Exynos4x12
+  sclk_spi0_isp       174     Exynos4x12
+  sclk_spi1_isp       175     Exynos4x12
+  sclk_uart_isp       176     Exynos4x12
+
+	      [Peripheral Clock Gates]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  fimc0               256
+  fimc1               257
+  fimc2               258
+  fimc3               259
+  csis0               260
+  csis1               261
+  jpeg                262
+  smmu_fimc0          263
+  smmu_fimc1          264
+  smmu_fimc2          265
+  smmu_fimc3          266
+  smmu_jpeg           267
+  vp                  268
+  mixer               269
+  tvenc               270     Exynos4210
+  hdmi                271
+  smmu_tv             272
+  mfc                 273
+  smmu_mfcl           274
+  smmu_mfcr           275
+  g3d                 276
+  g2d                 277     Exynos4210
+  rotator             278     Exynos4210
+  mdma                279     Exynos4210
+  smmu_g2d            280     Exynos4210
+  smmu_rotator        281     Exynos4210
+  smmu_mdma           282     Exynos4210
+  fimd0               283
+  mie0                284
+  mdnie0              285     Exynos4412
+  dsim0               286
+  smmu_fimd0          287
+  fimd1               288     Exynos4210
+  mie1                289     Exynos4210
+  dsim1               290     Exynos4210
+  smmu_fimd1          291     Exynos4210
+  pdma0               292
+  pdma1               293
+  pcie_phy            294
+  sata_phy            295     Exynos4210
+  tsi                 296
+  sdmmc0              297
+  sdmmc1              298
+  sdmmc2              299
+  sdmmc3              300
+  sdmmc4              301
+  sata                302     Exynos4210
+  sromc               303
+  usb_host            304
+  usb_device          305
+  pcie                306
+  onenand             307
+  nfcon               308
+  smmu_pcie           309
+  gps                 310
+  smmu_gps            311
+  uart0               312
+  uart1               313
+  uart2               314
+  uart3               315
+  uart4               316
+  i2c0                317
+  i2c1                318
+  i2c2                319
+  i2c3                320
+  i2c4                321
+  i2c5                322
+  i2c6                323
+  i2c7                324
+  i2c_hdmi            325
+  tsadc               326
+  spi0                327
+  spi1                328
+  spi2                329
+  i2s1                330
+  i2s2                331
+  pcm0                332
+  i2s0                333
+  pcm1                334
+  pcm2                335
+  pwm                 336
+  slimbus             337
+  spdif               338
+  ac97                339
+  modemif             340
+  chipid              341
+  sysreg              342
+  hdmi_cec            343
+  mct                 344
+  wdt                 345
+  rtc                 346
+  keyif               347
+  audss               348
+  mipi_hsi            349     Exynos4210
+  mdma2               350     Exynos4210
+  pixelasyncm0        351
+  pixelasyncm1        352
+  fimc_lite0          353     Exynos4x12
+  fimc_lite1          354     Exynos4x12
+  ppmuispx            355     Exynos4x12
+  ppmuispmx           356     Exynos4x12
+  fimc_isp            357     Exynos4x12
+  fimc_drc            358     Exynos4x12
+  fimc_fd             359     Exynos4x12
+  mcuisp              360     Exynos4x12
+  gicisp              361     Exynos4x12
+  smmu_isp            362     Exynos4x12
+  smmu_drc            363     Exynos4x12
+  smmu_fd             364     Exynos4x12
+  smmu_lite0          365     Exynos4x12
+  smmu_lite1          366     Exynos4x12
+  mcuctl_isp          367     Exynos4x12
+  mpwm_isp            368     Exynos4x12
+  i2c0_isp            369     Exynos4x12
+  i2c1_isp            370     Exynos4x12
+  mtcadc_isp          371     Exynos4x12
+  pwm_isp             372     Exynos4x12
+  wdt_isp             373     Exynos4x12
+  uart_isp            374     Exynos4x12
+  asyncaxim           375     Exynos4x12
+  smmu_ispcx          376     Exynos4x12
+  spi0_isp            377     Exynos4x12
+  spi1_isp            378     Exynos4x12
+  pwm_isp_sclk        379     Exynos4x12
+  spi0_isp_sclk       380     Exynos4x12
+  spi1_isp_sclk       381     Exynos4x12
+  uart_isp_sclk       382     Exynos4x12
+
+		[Mux Clocks]
+
+  Clock			ID	SoC (if specific)
+  -----------------------------------------------
+
+  mout_fimc0		384
+  mout_fimc1		385
+  mout_fimc2		386
+  mout_fimc3		387
+  mout_cam0		388
+  mout_cam1		389
+  mout_csis0		390
+  mout_csis1		391
+  mout_g3d0		392
+  mout_g3d1		393
+  mout_g3d		394
+  aclk400_mcuisp	395	Exynos4x12
+
+		[Div Clocks]
+
+  Clock			ID	SoC (if specific)
+  -----------------------------------------------
+
+  div_isp0		450	Exynos4x12
+  div_isp1		451	Exynos4x12
+  div_mcuisp0		452	Exynos4x12
+  div_mcuisp1		453	Exynos4x12
+  div_aclk200		454	Exynos4x12
+  div_aclk400_mcuisp	455	Exynos4x12
+
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
+	};

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

+* Samsung Exynos5250 Clock Controller
+
+The Exynos5250 clock controller generates and supplies clock to various
+controllers within the Exynos5250 SoC.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  fin_pll		1
+
+  [Clock Gate for Special Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  sclk_cam_bayer	128
+  sclk_cam0		129
+  sclk_cam1		130
+  sclk_gscl_wa		131
+  sclk_gscl_wb		132
+  sclk_fimd1		133
+  sclk_mipi1		134
+  sclk_dp		135
+  sclk_hdmi		136
+  sclk_pixel		137
+  sclk_audio0		138
+  sclk_mmc0		139
+  sclk_mmc1		140
+  sclk_mmc2		141
+  sclk_mmc3		142
+  sclk_sata		143
+  sclk_usb3		144
+  sclk_jpeg		145
+  sclk_uart0		146
+  sclk_uart1		147
+  sclk_uart2		148
+  sclk_uart3		149
+  sclk_pwm		150
+  sclk_audio1		151
+  sclk_audio2		152
+  sclk_spdif		153
+  sclk_spi0		154
+  sclk_spi1		155
+  sclk_spi2		156
+
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  gscl0			256
+  gscl1			257
+  gscl2			258
+  gscl3			259
+  gscl_wa		260
+  gscl_wb		261
+  smmu_gscl0		262
+  smmu_gscl1		263
+  smmu_gscl2		264
+  smmu_gscl3		265
+  mfc			266
+  smmu_mfcl		267
+  smmu_mfcr		268
+  rotator		269
+  jpeg			270
+  mdma1			271
+  smmu_rotator		272
+  smmu_jpeg		273
+  smmu_mdma1		274
+  pdma0			275
+  pdma1			276
+  sata			277
+  usbotg		278
+  mipi_hsi		279
+  sdmmc0		280
+  sdmmc1		281
+  sdmmc2		282
+  sdmmc3		283
+  sromc			284
+  usb2			285
+  usb3			286
+  sata_phyctrl		287
+  sata_phyi2c		288
+  uart0			289
+  uart1			290
+  uart2			291
+  uart3			292
+  uart4			293
+  i2c0			294
+  i2c1			295
+  i2c2			296
+  i2c3			297
+  i2c4			298
+  i2c5			299
+  i2c6			300
+  i2c7			301
+  i2c_hdmi		302
+  adc			303
+  spi0			304
+  spi1			305
+  spi2			306
+  i2s1			307
+  i2s2			308
+  pcm1			309
+  pcm2			310
+  pwm			311
+  spdif			312
+  ac97			313
+  hsi2c0		314
+  hsi2c1		315
+  hs12c2		316
+  hs12c3		317
+  chipid		318
+  sysreg		319
+  pmu			320
+  cmu_top		321
+  cmu_core		322
+  cmu_mem		323
+  tzpc0			324
+  tzpc1			325
+  tzpc2			326
+  tzpc3			327
+  tzpc4			328
+  tzpc5			329
+  tzpc6			330
+  tzpc7			331
+  tzpc8			332
+  tzpc9			333
+  hdmi_cec		334
+  mct			335
+  wdt			336
+  rtc			337
+  tmu			338
+  fimd1			339
+  mie1			340
+  dsim0			341
+  dp			342
+  mixer			343
+  hdmi			345
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5250-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
+	};

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  xtal			1
+  arm_clk		2
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  spi_baud		16
+  pb0_250		17
+  pr0_250		18
+  pr1_250		19
+  b_250			20
+  b_125			21
+  b_200			22
+  sata			23
+  usb			24
+  gmac0			25
+  cs250			26
+  pb0_250_o		27
+  pr0_250_o		28
+  pr1_250_o		29
+  b_250_o		30
+  b_125_o		31
+  b_200_o		32
+  sata_o		33
+  usb_o			34
+  gmac0_o		35
+  cs250_o		36
+
+Example: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x10000>;
+		#clock-cells = <1>;
+	};

Documentation/devicetree/bindings/gpu/samsung-g2d.txt

+* Samsung 2D Graphics Accelerator
+
+Required properties:
+  - compatible : value should be one among the following:
+	(a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210 SoC
+	(b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12 SoCs
+	(c) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250 SoC
+
+  - reg : Physical base address of the IP registers and length of memory
+	  mapped region.
+
+  - interrupts : G2D interrupt number to the CPU.
+
+Example:
+	g2d@12800000 {
+		compatible = "samsung,s5pv210-g2d";
+		reg = <0x12800000 0x1000>;
+		interrupts = <0 89 0>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -21,3 +21,24 @@ Required properties:
 
   - samsung,mfc-l : Base address of the second memory bank used by MFC
 		    for DMA contiguous memory allocation and its size.
+
+Optional properties:
+  - samsung,power-domain : power-domain property defined with a phandle
+			   to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+	compatible = "samsung,mfc-v5";
+	reg = <0x13400000 0x10000>;
+	interrupts = <0 94 0>;
+	samsung,power-domain = <&pd_mfc>;
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};

Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt

+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+  it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+  should be the order of the interrupts specified. The local timer interrupts
+  should be specified after the four global timer interrupts have been
+  specified.
+
+	0: Global Timer Interrupt 0
+	1: Global Timer Interrupt 1
+	2: Global Timer Interrupt 2
+	3: Global Timer Interrupt 3
+	4: Local Timer Interrupt 0
+	5: Local Timer Interrupt 1
+	6: ..
+	7: ..
+	i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+	   interrupt generated by MCT and the remaining three global timer
+	   interrupts are unused. Two local timer interrupts have been
+	   specified.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+			     <0 42 0>, <0 48 0>;
+	};
+
+Example 2: In this example, the MCT global and local timer interrupts are
+	   connected to two seperate interrupt controllers. Hence, an
+	   interrupt-map is created to map the interrupts to the respective
+	   interrupt controllers.
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};

Documentation/devicetree/bindings/usb/exynos-usb.txt

+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+   EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+
+Optional properties:
+ - samsung,vbus-gpio:  if present, specifies the GPIO that
+   needs to be pulled up for the bus to be powered.
+
+Example:
+
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+	};
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+   OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+
+Example:
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+	};

Documentation/devicetree/bindings/video/samsung-fimd.txt

+Device-Tree bindings for Samsung SoC display controller (FIMD)
+
+FIMD (Fully Interactive Mobile Display) is the Display Controller for the
+Samsung series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
+		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
+		"samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */
+		"samsung,s5pc100-fimd"; /* for S5PC100 SoC  */
+		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+
+- reg: physical base address and length of the FIMD registers set.
+
+- interrupt-parent: should be the phandle of the fimd controller's
+		parent interrupt controller.
+
+- interrupts: should contain a list of all FIMD IP block interrupts in the
+		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+	"lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+         clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+               property. Must contain "sclk_fimd" and "fimd".
+
+Optional Properties:
+- samsung,power-domain: a phandle to FIMD power domain node.
+
+Example:
+
+SoC specific DT entry:
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos4210-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x11c00000 0x20000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <11 0>, <11 1>, <11 2>;
+		clocks = <&clock 140>, <&clock 283>;
+		clock-names = "sclk_fimd", "fimd";
+		samsung,power-domain = <&pd_lcd0>;
+		status = "disabled";
+	};
+
+Board specific DT entry:
+
+	fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};

arch/arm/Kconfig

@@ -772,8 +772,10 @@ config ARCH_SA1100
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
 	select ARCH_HAS_CPUFREQ
-	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -790,10 +792,11 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select ARM_VIC
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_V6
+	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -827,9 +830,11 @@ config ARCH_S5P64X0
 
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
-	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -862,6 +867,7 @@ config ARCH_EXYNOS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
@@ -1650,7 +1656,7 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP
 	default y
-	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
+	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system

arch/arm/boot/dts/Makefile

@@ -42,7 +42,11 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
+	exynos4412-odroidx.dtb \
 	exynos4412-smdk4412.dtb \
+	exynos4412-origen.dtb \
+	exynos5250-arndale.dtb \
+	exynos5440-sd5v1.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5440-ssdk5440.dtb

arch/arm/boot/dts/cros5250-common.dtsi

@@ -19,31 +19,168 @@ memory {
 	chosen {
 	};
 
+	pinctrl@11400000 {
+		/*
+		 * Disabled pullups since external part has its own pullups and
+		 * double-pulling gets us out of spec in some cases.
+		 */
+		i2c2_bus: i2c2-bus {
+			samsung,pin-pud = <0>;
+		};
+	};
+
 	i2c@12C60000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
-		gpios = <&gpb3 0 2 3 0>,
-			<&gpb3 1 2 3 0>;
+
+		max77686@09 {
+			compatible = "maxim,max77686";
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "P1.0V_LDO_OUT1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "P1.8V_LDO_OUT2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "P1.8V_LDO_OUT3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "P1.1V_LDO_OUT7";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "P1.0V_LDO_OUT8";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "P1.8V_LDO_OUT10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "P3.0V_LDO_OUT12";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "P1.8V_LDO_OUT14";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "P1.0V_LDO_OUT15";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "P1.8V_LDO_OUT16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "P1.8V_BUCK_OUT5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "P1.35V_BUCK_OUT6";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "P2.0V_BUCK_OUT7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "P2.85V_BUCK_OUT8";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+			};
+		};
 	};
 
 	i2c@12C70000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
-		gpios = <&gpb3 2 2 3 0>,
-			<&gpb3 3 2 3 0>;
 	};
 
 	i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 
-		/*
-		 * Disabled pullups since external part has its own pullups and
-		 * double-pulling gets us out of spec in some cases.
-		 */
-		gpios = <&gpa0 6 3 0 0>,
-			<&gpa0 7 3 0 0>;
-
 		hdmiddc@50 {
 			compatible = "samsung,exynos5-hdmiddc";
 			reg = <0x50>;
@@ -53,8 +190,6 @@ hdmiddc@50 {
 	i2c@12C90000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
-		gpios = <&gpa1 2 3 3 0>,
-			<&gpa1 3 3 3 0>;
 	};
 
 	i2c@12CA0000 {
@@ -64,8 +199,6 @@ i2c@12CA0000 {
 	i2c@12CB0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
-		gpios = <&gpa2 2 3 3 0>,
-			<&gpa2 3 3 3 0>;
 	};
 
 	i2c@12CC0000 {
@@ -75,8 +208,6 @@ i2c@12CC0000 {
 	i2c@12CD0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
-		gpios = <&gpb2 2 3 3 0>,
-			<&gpb2 3 3 3 0>;
 	};
 
 	i2c@12CE0000 {
@@ -98,15 +229,12 @@ dwmmc0@12200000 {
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
 		};
 	};
 
@@ -122,15 +250,13 @@ dwmmc2@12220000 {
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
-			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
-			wp-gpios = <&gpc2 1 0 0 3>;
-			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
-				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
-				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+			wp-gpios = <&gpc2 1 0>;
 		};
 	};
 
@@ -143,11 +269,11 @@ dwmmc3@12230000 {
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		/* See board-specific dts files for pin setup */
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
-			/* See board-specific dts files for GPIOs */
 		};
 	};
 
@@ -156,9 +282,6 @@ spi_0: spi@12d20000 {
 	};
 
 	spi_1: spi@12d30000 {
-		gpios = <&gpa2 4 2 3 0>,
-			<&gpa2 6 2 3 0>,
-			<&gpa2 7 2 3 0>;
 		samsung,spi-src-clk = <0>;
 		num-cs = <1>;
 	};
@@ -168,7 +291,7 @@ spi_2: spi@12d40000 {
 	};
 
 	hdmi {
-		hpd-gpio = <&gpx3 7 0xf 1 3>;
+		hpd-gpio = <&gpx3 7 0>;
 	};
 
 	gpio-keys {
@@ -176,7 +299,7 @@ gpio-keys {
 
 		power {
 			label = "Power";
-			gpios = <&gpx1 3 0 0x10000 0>;
+			gpios = <&gpx1 3 1>;
 			linux,code = <116>; /* KEY_POWER */
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/exynos4.dtsi

@@ -82,10 +82,17 @@ combiner:interrupt-controller@10440000 {
 		reg = <0x10440000 0x1000>;
 	};
 
+	sys_reg: sysreg {
+		compatible = "samsung,exynos4-sysreg", "syscon";
+		reg = <0x10010000 0x400>;
+	};
+
 	watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
+		clocks = <&clock 345>;
+		clock-names = "watchdog";
 		status = "disabled";
 	};
 
@@ -93,6 +100,8 @@ rtc@10070000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <0 44 0>, <0 45 0>;
+		clocks = <&clock 346>;
+		clock-names = "rtc";
 		status = "disabled";
 	};
 
@@ -100,6 +109,8 @@ keypad@100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
+		clocks = <&clock 347>;
+		clock-names = "keypad";
 		status = "disabled";
 	};
 
@@ -107,6 +118,8 @@ sdhci@12510000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
+		clocks = <&clock 297>, <&clock 145>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -114,6 +127,8 @@ sdhci@12520000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
+		clocks = <&clock 298>, <&clock 146>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -121,6 +136,8 @@ sdhci@12530000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
+		clocks = <&clock 299>, <&clock 147>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
 
@@ -128,6 +145,16 @@ sdhci@12540000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
+		clocks = <&clock 300>, <&clock 148>;
+		clock-names = "hsmmc", "mmc_busclk.2";
+		status = "disabled";
+	};
+
+	mfc: codec@13400000 {
+		compatible = "samsung,mfc-v5";
+		reg = <0x13400000 0x10000>;
+		interrupts = <0 94 0>;
+		samsung,power-domain = <&pd_mfc>;
 		status = "disabled";
 	};
 
@@ -135,6 +162,8 @@ serial@13800000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
 		interrupts = <0 52 0>;
+		clocks = <&clock 312>, <&clock 151>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -142,6 +171,8 @@ serial@13810000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
 		interrupts = <0 53 0>;
+		clocks = <&clock 313>, <&clock 152>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -149,6 +180,8 @@ serial@13820000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -156,6 +189,8 @@ serial@13830000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
 		interrupts = <0 55 0>;
+		clocks = <&clock 315>, <&clock 154>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
 
@@ -165,6 +200,10 @@ i2c_0: i2c@13860000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
+		clocks = <&clock 317>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
 		status = "disabled";
 	};
 
@@ -174,6 +213,10 @@ i2c_1: i2c@13870000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
 		interrupts = <0 59 0>;
+		clocks = <&clock 318>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
 		status = "disabled";
 	};
 
@@ -183,6 +226,8 @@ i2c_2: i2c@13880000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
 		interrupts = <0 60 0>;
+		clocks = <&clock 319>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -192,6 +237,8 @@ i2c_3: i2c@13890000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
 		interrupts = <0 61 0>;
+		clocks = <&clock 320>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -201,6 +248,8 @@ i2c_4: i2c@138A0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
 		interrupts = <0 62 0>;
+		clocks = <&clock 321>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -210,6 +259,8 @@ i2c_5: i2c@138B0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
 		interrupts = <0 63 0>;
+		clocks = <&clock 322>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -219,6 +270,8 @@ i2c_6: i2c@138C0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
 		interrupts = <0 64 0>;
+		clocks = <&clock 323>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -228,6 +281,8 @@ i2c_7: i2c@138D0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
 		interrupts = <0 65 0>;
+		clocks = <&clock 324>;
+		clock-names = "i2c";
 		status = "disabled";
 	};
 
@@ -239,6 +294,10 @@ spi_0: spi@13920000 {
 		rx-dma-channel = <&pdma0 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 327>, <&clock 159>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_bus>;
 		status = "disabled";
 	};
 
@@ -250,6 +309,10 @@ spi_1: spi@13930000 {
 		rx-dma-channel = <&pdma1 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 328>, <&clock 160>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
 		status = "disabled";
 	};
 
@@ -261,6 +324,10 @@ spi_2: spi@13940000 {
 		rx-dma-channel = <&pdma0 8>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 329>, <&clock 161>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_bus>;
 		status = "disabled";
 	};
 
@@ -275,6 +342,8 @@ pdma0: pdma@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 292>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -284,6 +353,8 @@ pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
+			clocks = <&clock 293>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -293,9 +364,23 @@ mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 279>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
 		};
 	};
+
+	fimd: fimd@11c00000 {
+		compatible = "samsung,exynos4210-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x11c00000 0x20000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <11 0>, <11 1>, <11 2>;
+		clocks = <&clock 140>, <&clock 283>;
+		clock-names = "sclk_fimd", "fimd";
+		samsung,power-domain = <&pd_lcd0>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos4210-origen.dts

@@ -57,6 +57,16 @@ sdhci@12510000 {
 		status = "okay";
 	};
 
+	g2d@12800000 {
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -121,4 +131,16 @@ status {
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210-smdkv310.dts

@@ -30,16 +30,19 @@ chosen {
 	};
 
 	sdhci@12530000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk2 2 2 3 3>;
-		gpios = <&gpk2 0 2 0 3>,
-			<&gpk2 1 2 0 3>,
-			<&gpk2 3 2 3 3>,
-			<&gpk2 4 2 3 3>,
-			<&gpk2 5 2 3 3>,
-			<&gpk2 6 2 3 3>;
+		bus-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		status = "okay";
+	};
+
+	g2d@12800000 {
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
 		status = "okay";
 	};
 
@@ -59,25 +62,32 @@ serial@13830000 {
 		status = "okay";
 	};
 
+	pinctrl@11000000 {
+		keypad_rows: keypad-rows {
+			samsung,pins = "gpx2-0", "gpx2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_cols: keypad-cols {
+			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
 	keypad@100A0000 {
 		samsung,keypad-num-rows = <2>;
 		samsung,keypad-num-columns = <8>;
 		linux,keypad-no-autorepeat;
 		linux,keypad-wakeup;
+		pinctrl-names = "default";
+		pinctrl-0 = <&keypad_rows &keypad_cols>;
 		status = "okay";
 
-		row-gpios = <&gpx2 0 3 3 0>,
-			    <&gpx2 1 3 3 0>;
-
-		col-gpios = <&gpx1 0 3 0 0>,
-			    <&gpx1 1 3 0 0>,
-			    <&gpx1 2 3 0 0>,
-			    <&gpx1 3 3 0 0>,
-			    <&gpx1 4 3 0 0>,
-			    <&gpx1 5 3 0 0>,
-			    <&gpx1 6 3 0 0>,
-			    <&gpx1 7 3 0 0>;
-
 		key_1 {
 			keypad,row = <0>;
 			keypad,column = <3>;
@@ -143,9 +153,7 @@ i2c@13860000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		gpios = <&gpd1 0 2 3 0>,
-			<&gpd1 1 2 3 0>;
+		samsung,i2c-max-bus-freq = <100000>;
 		status = "okay";
 
 		eeprom@50 {
@@ -160,9 +168,6 @@ eeprom@52 {
 	};
 
 	spi_2: spi@13940000 {
-		gpios = <&gpc1 1 5 3 0>,
-			<&gpc1 3 5 3 0>,
-			<&gpc1 4 5 3 0>;
 		status = "okay";
 
 		w25x80@0 {
@@ -173,7 +178,7 @@ w25x80@0 {
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpc1 2 1 0 3>;
+				cs-gpio = <&gpc1 2 0>;
 				samsung,spi-feedback-delay = <0>;
 			};
 
@@ -189,4 +194,16 @@ partition@40000 {
 			};
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <12000000>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210-trats.dts

@@ -289,4 +289,16 @@ safe2_sreg: ESAFEOUT2 {
 			};
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210.dtsi

@@ -47,6 +47,36 @@ combiner:interrupt-controller@10440000 {
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 	};
 
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &gic 0 69 0>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 0 42 0>,
+					<0x5 0 &gic 0 48 0>;
+		};
+	};
+
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
@@ -76,4 +106,11 @@ tmu@100C0000 {
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
 	};
+
+	g2d@12800000 {
+		compatible = "samsung,s5pv210-g2d";
+		reg = <0x12800000 0x1000>;
+		interrupts = <0 89 0>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos4212.dtsi

@@ -25,4 +25,26 @@ / {
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4412-odroidx.dts

+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X board based on Exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led2 {
+			label = "led2:mmc0";
+			gpios = <&gpc1 2 1>;
+			default-state = "on";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	mshc@12550000 {
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	regulator_p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpa1 1 1>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos4412-smdk4412.dts

@@ -27,6 +27,27 @@ chosen {
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};
 
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -42,4 +63,16 @@ serial@13820000 {
 	serial@13830000 {
 		status = "okay";
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4412.dtsi

@@ -25,4 +25,30 @@ / {
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>, <6 0>, <7 0>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>,
+					<0x6 0 &gic 1 12 0>,
+					<0x7 0 &gic 1 12 0>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4x12.dtsi

@@ -36,6 +36,12 @@ combiner:interrupt-controller@10440000 {
 			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
 	};
 
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4412-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;
@@ -66,4 +72,11 @@ pinctrl_3: pinctrl@106E0000 {
 		reg = <0x106E0000 0x1000>;
 		interrupts = <0 72 0>;
 	};
+
+	g2d@10800000 {
+		compatible = "samsung,exynos4212-g2d";
+		reg = <0x10800000 0x1000>;
+		interrupts = <0 89 0>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos5250-arndale.dts

+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "Insignal Arndale evaluation board based on EXYNOS5250";
+	compatible = "insignal,arndale", "samsung,exynos5250";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	codec@11000000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		samsung,i2c-slave-addr = <0x66>;
+
+		s5m8767_pmic@66 {
+			compatible = "samsung,s5m8767-pmic";
+			reg = <0x66>;
+
+			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+			s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+			s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
+							<&gpd1 1 0>,
+							<&gpd1 2 0>;
+			s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
+							<&gpx2 4 0>,
+							<&gpx2 5 0>;
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE_1.0V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDD_28IO_DP_1.35V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDD_COMMON1_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDD_IOPERI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					op_mode = <1>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDD_EXT_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD_MPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD_XPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VDD_COMMON2_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VDD_33ON_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					op_mode = <1>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VDD_COMMON3_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD_ABB2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD_USB_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDQ_C2C_W_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB0_3_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_COMMON4_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VDDQ_MMC2_3_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "VDD_33ON_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					op_mode = <1>;
+				};
+
+				ldo22_reg: LDO22 {
+					regulator-name = "EXT_33_OFF";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					op_mode = <1>;
+				};
+
+				ldo23_reg: LDO23 {
+					regulator-name = "EXT_28_OFF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					op_mode = <1>;
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "PVDD_LDO25";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					op_mode = <1>;
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "EXT_18_OFF";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					op_mode = <1>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <925000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "VDD_MEM_1.35V";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1355000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "VDD_33_OFF_EXT1";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <3000000>;
+					op_mode = <1>;
+				};
+			};
+		};
+	};
+
+	i2c@12C70000 {
+		status = "disabled";
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
+
+	i2c@121D0000 {
+		status = "disabled";
+	};
+
+	dwmmc_0: dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		vmmc-supply = <&mmc_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		vmmc-supply = <&mmc_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			disable-wp;
+		};
+	};
+
+	dwmmc_3: dwmmc3@12230000 {
+		status = "disabled";
+	};
+
+	spi_0: spi@12d20000 {
+		status = "disabled";
+	};
+
+	spi_1: spi@12d30000 {
+		status = "disabled";
+	};
+
+	spi_2: spi@12d40000 {
+		status = "disabled";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		menu {
+			label = "SW-TACT2";
+			gpios = <&gpx1 4 1>;
+			linux,code = <139>;
+			gpio-key,wakeup;
+		};
+
+		home {
+			label = "SW-TACT3";
+			gpios = <&gpx1 5 1>;
+			linux,code = <102>;
+			gpio-key,wakeup;
+		};
+
+		up {
+			label = "SW-TACT4";
+			gpios = <&gpx1 6 1>;
+			linux,code = <103>;
+			gpio-key,wakeup;
+		};
+
+		down {
+			label = "SW-TACT5";
+			gpios = <&gpx1 7 1>;
+			linux,code = <108>;
+			gpio-key,wakeup;
+		};
+
+		back {
+			label = "SW-TACT6";
+			gpios = <&gpx2 0 1>;
+			linux,code = <158>;
+			gpio-key,wakeup;
+		};
+
+		wakeup {
+			label = "SW-TACT7";
+			gpios = <&gpx2 1 1>;
+			linux,code = <143>;
+			gpio-key,wakeup;
+		};
+	};
+
+	hdmi {
+		hpd-gpio = <&gpx3 7 2>;
+		vdd_osc-supply = <&ldo10_reg>;
+		vdd_pll-supply = <&ldo8_reg>;
+		vdd-supply = <&ldo8_reg>;
+	};
+
+	mmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_33ON_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 1>;
+		enable-active-high;
+	};
+
+	reg_hdmi_en: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-en";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -30,8 +30,6 @@ chosen {
 	i2c@12C60000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
-		gpios = <&gpb3 0 2 3 0>,
-			<&gpb3 1 2 3 0>;
 
 		eeprom@50 {
 			compatible = "samsung,s524ad0xd1";
@@ -42,8 +40,6 @@ eeprom@50 {
 	i2c@12C70000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
-		gpios = <&gpb3 2 2 3 0>,
-			<&gpb3 3 2 3 0>;
 
 		eeprom@51 {
 			compatible = "samsung,s524ad0xd1";
@@ -74,8 +70,6 @@ sata@122F0000 {
 	i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
-		gpios = <&gpa0 6 3 3 0>,
-			<&gpa0 7 3 3 0>;
 
 		hdmiddc@50 {
 			compatible = "samsung,exynos5-hdmiddc";
@@ -122,15 +116,12 @@ dwmmc0@12200000 {
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
 		};
 	};
 
@@ -146,17 +137,13 @@ dwmmc2@12220000 {
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 
 		slot@0 {
 			reg = <0>;
 			bus-width = <4>;
-			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
 			disable-wp;
-			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
-				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
-				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
-				<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
-				<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
 		};
 	};
 
@@ -169,10 +156,6 @@ spi_0: spi@12d20000 {
 	};
 
 	spi_1: spi@12d30000 {
-		gpios = <&gpa2 4 2 3 0>,
-			<&gpa2 6 2 3 0>,
-			<&gpa2 7 2 3 0>;
-
 		w25q80bw@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -181,7 +164,7 @@ w25q80bw@0 {
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpa2 5 1 0 3>;
+				cs-gpio = <&gpa2 5 0>;
 				samsung,spi-feedback-delay = <0>;
 			};
 
@@ -203,7 +186,7 @@ spi_2: spi@12d40000 {
 	};
 
 	hdmi {
-		hpd-gpio = <&gpx3 7 0xf 1 3>;
+		hpd-gpio = <&gpx3 7 0>;
 	};
 
 	codec@11000000 {
@@ -212,9 +195,7 @@ codec@11000000 {
 	};
 
 	i2s0: i2s@03830000 {
-		gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
-			<&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
-			<&gpz 6 2 0 0>;
+		status = "okay";
 	};
 
 	i2s1: i2s@12D60000 {
@@ -231,4 +212,40 @@ sound {
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&wm8994>;
 	};
+
+	usb@12110000 {
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};
+
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing@0 {
+			/* 1280x800 */
+			clock-frequency = <50000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <4>;
+			hback-porch = <4>;
+			hsync-len = <4>;
+			vback-porch = <4>;
+			vfront-porch = <4>;
+			vsync-len = <4>;
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };

arch/arm/boot/dts/exynos5250-snow.dts

@@ -16,12 +16,27 @@ / {
 	model = "Google Snow";
 	compatible = "google,snow", "samsung,exynos5250";
 
+	pinctrl@11400000 {
+		sd3_clk: sd3-clk {
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pin-drv = <0>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
 		lid-switch {
 			label = "Lid";
-			gpios = <&gpx3 5 0 0x10000 0>;
+			gpios = <&gpx3 5 1>;
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
@@ -35,9 +50,19 @@ lid-switch {
 	 */
 	dwmmc3@12230000 {
 		slot@0 {
-			gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
-				<&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
-				<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+		};
+	};
+
+	usb@12110000 {
+		samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
 		};
 	};
 };

arch/arm/boot/dts/exynos5440-sd5v1.dts

+/*
+ * SAMSUNG SD5v1 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5440.dtsi"
+
+/ {
+	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
+	compatible = "samsung,sd5v1", "samsung,exynos5440";
+
+	chosen {
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
+	};
+
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	gmac: ethernet@00230000 {
+		fixed_phy;
+		phy_addr = <1>;
+	};
+
+	spi {
+		status = "disabled";
+	};
+
+};

arch/arm/boot/dts/exynos5440-ssdk5440.dts

@@ -16,31 +16,18 @@ / {
 	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
 	compatible = "samsung,ssdk5440", "samsung,exynos5440";
 
-	memory {
-		reg = <0x80000000 0x80000000>;
-	};
-
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
 	};
 
 	spi {
 		status = "disabled";
 	};
 
-	i2c@F0000 {
-		status = "disabled";
-	};
-
-	i2c@100000 {
-		status = "disabled";
-	};
-
-	watchdog {
-		status = "disabled";
-	};
-
-	rtc {
-		status = "disabled";
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
+		};
 	};
 };

arch/arm/boot/dts/exynos5440.dtsi

@@ -16,63 +16,89 @@ / {
 
 	interrupt-parent = <&gic>;
 
+	clock: clock-controller@0x160000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic:interrupt-controller@2E0000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x2E1000 0x1000>, <0x2E2000 0x1000>;
+		reg =	<0x2E1000 0x1000>,
+			<0x2E2000 0x1000>,
+			<0x2E4000 0x2000>,
+			<0x2E6000 0x2000>;
+		interrupts = <1 9 0xf04>;
 	};
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 13 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <0>;
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <1>;
 		};
 		cpu@2 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <2>;
 		};
 		cpu@3 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <3>;
 		};
 	};
 
-	common {
-		compatible = "samsung,exynos5440";
+	arm-pmu {
+		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+		interrupts = <0 52 4>,
+			     <0 53 4>,
+			     <0 54 4>,
+			     <0 55 4>;
+	};
+
+	timer {
+		compatible = "arm,cortex-a15-timer",
+			     "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <50000000>;
+	};
 
+	cpufreq@160000 {
+		compatible = "samsung,exynos5440-cpufreq";
+		reg = <0x160000 0x1000>;
+		interrupts = <0 57 0>;
+		operating-points = <
+				/* KHz	  uV */
+				1200000 1025000
+				1000000 975000
+				800000  925000
+		>;
 	};
 
 	serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
 		interrupts = <0 2 0>;
+		clocks = <&clock 21>, <&clock 21>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@C0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
 		interrupts = <0 3 0>;
+		clocks = <&clock 21>, <&clock 21>;
+		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	spi {
@@ -83,11 +109,15 @@ spi {
 		rx-dma-channel = <&pdma0 4>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>, <&clock 16>;
+		clock-names = "spi", "spi_busclk0";
 	};
 
 	pinctrl {
 		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
+		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
+			     <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		#gpio-cells = <2>;
@@ -110,25 +140,42 @@ uart1: uart1 {
 	};
 
 	i2c@F0000 {
-		compatible = "samsung,s3c2440-i2c";
+		compatible = "samsung,exynos5440-i2c";
 		reg = <0xF0000 0x1000>;
 		interrupts = <0 5 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>;
+		clock-names = "i2c";
 	};
 
 	i2c@100000 {
-		compatible = "samsung,s3c2440-i2c";
+		compatible = "samsung,exynos5440-i2c";
 		reg = <0x100000 0x1000>;
 		interrupts = <0 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>;
+		clock-names = "i2c";
 	};
 
 	watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
 		interrupts = <0 1 0>;
+		clocks = <&clock 21>;
+		clock-names = "watchdog";
+	};
+
+	gmac: ethernet@00230000 {
+		compatible = "snps,dwmac-3.70a";
+		reg = <0x00230000 0x8000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 31 4>;
+		interrupt-names = "macirq";
+		phy-mode = "sgmii";
+		clocks = <&clock 25>;
+		clock-names = "stmmaceth";
 	};
 
 	amba {
@@ -138,19 +185,23 @@ amba {
 		interrupt-parent = <&gic>;
 		ranges;
 
-		pdma0: pdma@121A0000 {
+		pdma0: pdma@00121000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x120000 0x1000>;
-			interrupts = <0 34 0>;
+			reg = <0x121000 0x1000>;
+			interrupts = <0 46 0>;
+			clocks = <&clock 8>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121B0000 {
+		pdma1: pdma@00120000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121000 0x1000>;
-			interrupts = <0 35 0>;
+			reg = <0x120000 0x1000>;
+			interrupts = <0 47 0>;
+			clocks = <&clock 8>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -161,5 +212,7 @@ rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
 		interrupts = <0 17 0>, <0 16 0>;
+		clocks = <&clock 21>;
+		clock-names = "rtc";
 	};
 };

arch/arm/mach-exynos/Kconfig

@@ -61,6 +61,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select S5P_DEV_MFC
@@ -79,12 +80,6 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
-config EXYNOS4_MCT
-	bool
-	default y
-	help
-	  Use MCT (Multi Core Timer) as kernel timers
-
 config EXYNOS_DEV_DMA
 	bool
 	help
@@ -276,8 +271,8 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select S5P_GPIO_INT
-	select S5P_HRT
 	select S5P_SETUP_MIPIPHY
+	select SAMSUNG_HRT
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -406,10 +401,12 @@ config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
+	select CLKSRC_OF
 	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
 	select PINCTRL_EXYNOS
+	select S5P_DEV_MFC
 	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.
@@ -422,6 +419,7 @@ config MACH_EXYNOS5_DT
 	default y
 	depends on ARCH_EXYNOS5
 	select ARM_AMBA
+	select CLKSRC_OF
 	select USE_OF
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.

arch/arm/mach-exynos/Makefile

@@ -13,10 +13,6 @@ obj-				:=
 # Core
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= clock-exynos4.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
-obj-$(CONFIG_SOC_EXYNOS5250)	+= clock-exynos5.o
 
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
@@ -26,8 +22,6 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
-obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
-
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
 # machine support

arch/arm/mach-exynos/clock-exynos4.h

-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk exynos4_clk_aclk_133;
-extern struct clksrc_clk exynos4_clk_mout_mpll;
-
-extern struct clksrc_sources exynos4_clkset_mout_corebus;
-extern struct clksrc_sources exynos4_clkset_group;
-
-extern struct clk *exynos4_clkset_aclk_top_list[];
-extern struct clk *exynos4_clkset_group_list[];
-
-extern struct clksrc_sources exynos4_clkset_mout_g2d0;
-extern struct clksrc_sources exynos4_clkset_mout_g2d1;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */

arch/arm/mach-exynos/clock-exynos4210.c

-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4210_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clksrc_clk *sysclks[] = {
-	/* nothing here yet */
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d0 = {
-	.clk	= {
-		.name		= "mout_g2d0",
-	},
-	.sources = &exynos4_clkset_mout_g2d0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d1 = {
-	.clk	= {
-		.name		= "mout_g2d1",
-	},
-	.sources = &exynos4_clkset_mout_g2d1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4210_clkset_mout_g2d_list[] = {
-	[0] = &exynos4210_clk_mout_g2d0.clk,
-	[1] = &exynos4210_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4210_clkset_mout_g2d = {
-	.sources	= exynos4210_clkset_mout_g2d_list,
-	.nr_sources	= ARRAY_SIZE(exynos4210_clkset_mout_g2d_list),
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk		= {
-			.name		= "sclk_sata",
-			.id		= -1,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_mout_corebus,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimg2d",
-		},
-		.sources = &exynos4210_clkset_mout_g2d,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
-	},
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sataphy",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sata",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.9",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.11",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "fimg2d",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
-	return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4210_clock_syscore_ops = {
-	.suspend	= exynos4210_clock_suspend,
-	.resume		= exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
-	int ptr;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
-	exynos4_clk_mout_mpll.reg_src.shift = 8;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4210_clock_syscore_ops);
-}

arch/arm/mach-exynos/common.h

@@ -12,7 +12,11 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-extern void exynos4_timer_init(void);
+#include <linux/of.h>
+
+extern void mct_init(void);
+void exynos_init_time(void);
+extern unsigned long xxti_f, xusbxti_f;
 
 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);
@@ -22,6 +26,10 @@ void exynos4_restart(char mode, const char *cmd);
 void exynos5_restart(char mode, const char *cmd);
 void exynos_init_late(void);
 
+/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
+void exynos4_clk_init(struct device_node *np);
+void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
+
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else

arch/arm/mach-exynos/include/mach/map.h

@@ -65,7 +65,6 @@
 #define EXYNOS5_PA_CMU			0x10010000
 
 #define EXYNOS4_PA_SYSTIMER		0x10050000
-#define EXYNOS5_PA_SYSTIMER		0x101C0000
 
 #define EXYNOS4_PA_WATCHDOG		0x10060000
 #define EXYNOS5_PA_WATCHDOG		0x101D0000

arch/arm/mach-s3c24xx/bast-irq.c

@@ -34,8 +34,6 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
-#include <plat/irq.h>
-
 #include "bast.h"
 
 #define irqdbf(x...)