ASoC: tlv320aic32x4: Break out clock setting into separate function

Break the clock setting logic out from the main hw_params.  It's
rather large and unweildy and makes for a large function.  This
also better enables some of the following changes to the clock
tree access in the driver.
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/tlv320aic32x4.c

@@ -696,17 +696,13 @@ static int aic32x4_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
 	return 0;
 }
 
-static int aic32x4_hw_params(struct snd_pcm_substream *substream,
-			     struct snd_pcm_hw_params *params,
-			     struct snd_soc_dai *dai)
+static int aic32x4_setup_clocks(struct snd_soc_component *component,
+				unsigned int sample_rate,
+				unsigned int parent_rate)
 {
-	struct snd_soc_component *component = dai->component;
-	struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component);
-	u8 iface1_reg = 0;
-	u8 dacsetup_reg = 0;
 	int i;
 
-	i = aic32x4_get_divs(aic32x4->sysclk, params_rate(params));
+	i = aic32x4_get_divs(parent_rate, sample_rate);
 	if (i < 0) {
 		printk(KERN_ERR "aic32x4: sampling rate not supported\n");
 		return i;
@@ -763,6 +759,20 @@ static int aic32x4_hw_params(struct snd_pcm_substream *substream,
 	snd_soc_component_update_bits(component, AIC32X4_BCLKN,
 			    AIC32X4_BCLK_MASK, aic32x4_divs[i].blck_N);
 
+	return 0;
+}
+
+static int aic32x4_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component);
+	u8 iface1_reg = 0;
+	u8 dacsetup_reg = 0;
+
+	aic32x4_setup_clocks(component, params_rate(params), aic32x4->sysclk);
+
 	switch (params_width(params)) {
 	case 16:
 		iface1_reg |= (AIC32X4_WORD_LEN_16BITS <<