Commit bf53c3b3 authored by Takashi Iwai's avatar Takashi Iwai Committed by Jaroslav Kysela

[ALSA] ali5451 - Fix PM support

Modules: ALI5451 driver

Fix PM support on ALI5451 driver.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 57feb835
......@@ -1991,9 +1991,10 @@ static int __devinit snd_ali_mixer(struct snd_ali * codec)
}
#ifdef CONFIG_PM
static int ali_suspend(struct snd_card *card, pm_message_t state)
static int ali_suspend(struct pci_dev *pci, pm_message_t state)
{
struct snd_ali *chip = card->pm_private_data;
struct snd_card *card = pci_get_drvdata(pci);
struct snd_ali *chip = card->private_data;
struct snd_ali_image *im;
int i, j;
......@@ -2001,11 +2002,10 @@ static int ali_suspend(struct snd_card *card, pm_message_t state)
if (! im)
return 0;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
for(i = 0 ; i < chip->num_of_codecs ; i++) {
if (chip->pcm[i])
snd_pcm_suspend_all(chip->pcm[i]);
if(chip->ac97[i])
snd_ac97_suspend(chip->ac97[i]);
snd_pcm_suspend_all(chip->pcm[i]);
snd_ac97_suspend(chip->ac97[i]);
}
spin_lock_irq(&chip->reg_lock);
......@@ -2033,13 +2033,15 @@ static int ali_suspend(struct snd_card *card, pm_message_t state)
outl(0xffffffff, ALI_REG(chip, ALI_STOP));
spin_unlock_irq(&chip->reg_lock);
pci_disable_device(chip->pci);
pci_disable_device(pci);
pci_save_state(pci);
return 0;
}
static int ali_resume(struct snd_card *card)
static int ali_resume(struct pci_dev *pci)
{
struct snd_ali *chip = card->pm_private_data;
struct snd_card *card = pci_get_drvdata(pci);
struct snd_ali *chip = card->private_data;
struct snd_ali_image *im;
int i, j;
......@@ -2047,7 +2049,8 @@ static int ali_resume(struct snd_card *card)
if (! im)
return 0;
pci_enable_device(chip->pci);
pci_restore_state(pci);
pci_enable_device(pci);
spin_lock_irq(&chip->reg_lock);
......@@ -2071,9 +2074,9 @@ static int ali_resume(struct snd_card *card)
spin_unlock_irq(&chip->reg_lock);
for(i = 0 ; i < chip->num_of_codecs ; i++)
if(chip->ac97[i])
snd_ac97_resume(chip->ac97[i]);
snd_ac97_resume(chip->ac97[i]);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
#endif /* CONFIG_PM */
......@@ -2204,9 +2207,8 @@ static int __devinit snd_ali_create(struct snd_card *card,
{
struct snd_ali *codec;
int i, err;
unsigned short cmdw = 0;
struct pci_dev *pci_dev = NULL;
static struct snd_device_ops ops = {
unsigned short cmdw;
static struct snd_device_ops ops = {
.dev_free = snd_ali_dev_free,
};
......@@ -2281,16 +2283,14 @@ static int __devinit snd_ali_create(struct snd_card *card,
codec->chregs.data.ainten = 0x00;
/* M1533: southbridge */
pci_dev = pci_get_device(0x10b9, 0x1533, NULL);
codec->pci_m1533 = pci_dev;
codec->pci_m1533 = pci_get_device(0x10b9, 0x1533, NULL);
if (! codec->pci_m1533) {
snd_printk(KERN_ERR "ali5451: cannot find ALi 1533 chip.\n");
snd_ali_free(codec);
return -ENODEV;
}
/* M7101: power management */
pci_dev = pci_get_device(0x10b9, 0x7101, NULL);
codec->pci_m7101 = pci_dev;
codec->pci_m7101 = pci_get_device(0x10b9, 0x7101, NULL);
if (! codec->pci_m7101 && codec->revision == ALI_5451_V02) {
snd_printk(KERN_ERR "ali5451: cannot find ALi 7101 chip.\n");
snd_ali_free(codec);
......@@ -2317,8 +2317,6 @@ static int __devinit snd_ali_create(struct snd_card *card,
codec->image = kmalloc(sizeof(*codec->image), GFP_KERNEL);
if (! codec->image)
snd_printk(KERN_WARNING "can't allocate apm buffer\n");
else
snd_card_set_pm_callback(card, ali_suspend, ali_resume, codec);
#endif
snd_ali_enable_address_interrupt(codec);
......@@ -2346,6 +2344,7 @@ static int __devinit snd_ali_probe(struct pci_dev *pci,
snd_card_free(card);
return err;
}
card->private_data = codec;
snd_ali_printk("mixer building ...\n");
if ((err = snd_ali_mixer(codec)) < 0) {
......@@ -2387,7 +2386,10 @@ static struct pci_driver driver = {
.id_table = snd_ali_ids,
.probe = snd_ali_probe,
.remove = __devexit_p(snd_ali_remove),
SND_PCI_PM_CALLBACKS
#ifdef CONFIG_PM
.suspend = ali_suspend,
.resume = ali_resume,
#endif
};
static int __init alsa_card_ali_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment