Merge branch 'for-4.7/pwm-args' into for-next

drivers/pwm/core.c

@@ -147,12 +147,12 @@ of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
 	if (IS_ERR(pwm))
 		return pwm;
 
-	pwm_set_period(pwm, args->args[1]);
+	pwm->args.period = args->args[1];
 
 	if (args->args[2] & PWM_POLARITY_INVERTED)
-		pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
+		pwm->args.polarity = PWM_POLARITY_INVERSED;
 	else
-		pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
+		pwm->args.polarity = PWM_POLARITY_NORMAL;
 
 	return pwm;
 }
@@ -173,7 +173,7 @@ of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
 	if (IS_ERR(pwm))
 		return pwm;
 
-	pwm_set_period(pwm, args->args[1]);
+	pwm->args.period = args->args[1];
 
 	return pwm;
 }
@@ -621,6 +621,13 @@ struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id)
 
 	pwm->label = con_id;
 
+	/*
+	 * FIXME: This should be removed once all PWM users properly make use
+	 * of struct pwm_args to initialize the PWM device. As long as this is
+	 * here, the PWM state and hardware state can get out of sync.
+	 */
+	pwm_apply_args(pwm);
+
 put:
 	of_node_put(args.np);
 
@@ -752,8 +759,15 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
 	if (IS_ERR(pwm))
 		goto out;
 
-	pwm_set_period(pwm, chosen->period);
-	pwm_set_polarity(pwm, chosen->polarity);
+	pwm->args.period = chosen->period;
+	pwm->args.polarity = chosen->polarity;
+
+	/*
+	 * FIXME: This should be removed once all PWM users properly make use
+	 * of struct pwm_args to initialize the PWM device. As long as this is
+	 * here, the PWM state and hardware state can get out of sync.
+	 */
+	pwm_apply_args(pwm);
 
 out:
 	mutex_unlock(&pwm_lookup_lock);

drivers/pwm/pwm-clps711x.c

@@ -60,7 +60,7 @@ static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 		return -EINVAL;
 
 	/* Store constant period value */
-	pwm_set_period(pwm, DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq));
+	pwm->args.period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq);
 
 	return 0;
 }

drivers/pwm/pwm-pxa.c

@@ -160,7 +160,7 @@ pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
 	if (IS_ERR(pwm))
 		return pwm;
 
-	pwm_set_period(pwm, args->args[0]);
+	pwm->args.period = args->args[0];
 
 	return pwm;
 }

include/linux/pwm.h

@@ -74,6 +74,24 @@ enum pwm_polarity {
 	PWM_POLARITY_INVERSED,
 };
 
+/**
+ * struct pwm_args - board-dependent PWM arguments
+ * @period: reference period
+ * @polarity: reference polarity
+ *
+ * This structure describes board-dependent arguments attached to a PWM
+ * device. These arguments are usually retrieved from the PWM lookup table or
+ * device tree.
+ *
+ * Do not confuse this with the PWM state: PWM arguments represent the initial
+ * configuration that users want to use on this PWM device rather than the
+ * current PWM hardware state.
+ */
+struct pwm_args {
+	unsigned int period;
+	enum pwm_polarity polarity;
+};
+
 enum {
 	PWMF_REQUESTED = 1 << 0,
 	PWMF_ENABLED = 1 << 1,
@@ -92,6 +110,7 @@ enum {
  * @period: period of the PWM signal (in nanoseconds)
  * @duty_cycle: duty cycle of the PWM signal (in nanoseconds)
  * @polarity: polarity of the PWM signal
+ * @args: PWM arguments
  */
 struct pwm_device {
 	const char *label;
@@ -105,6 +124,8 @@ struct pwm_device {
 	unsigned int period;
 	unsigned int duty_cycle;
 	enum pwm_polarity polarity;
+
+	struct pwm_args args;
 };
 
 static inline bool pwm_is_enabled(const struct pwm_device *pwm)
@@ -144,6 +165,18 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
 	return pwm ? pwm->polarity : PWM_POLARITY_NORMAL;
 }
 
+static inline void pwm_get_args(const struct pwm_device *pwm,
+				struct pwm_args *args)
+{
+	*args = pwm->args;
+}
+
+static inline void pwm_apply_args(struct pwm_device *pwm)
+{
+	pwm_set_period(pwm, pwm->args.period);
+	pwm_set_polarity(pwm, pwm->args.polarity);
+}
+
 /**
  * struct pwm_ops - PWM controller operations
  * @request: optional hook for requesting a PWM