spi: spi-s3c64xx: Fix indentation in the register offset definitions

Change indentation so register address offset and register bit definitions
are aligned to same column.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-s3c64xx.c

@@ -28,15 +28,15 @@
 
 #define S3C64XX_SPI_CH_CFG		0x00
 #define S3C64XX_SPI_CLK_CFG		0x04
-#define S3C64XX_SPI_MODE_CFG	0x08
-#define S3C64XX_SPI_SLAVE_SEL	0x0C
+#define S3C64XX_SPI_MODE_CFG		0x08
+#define S3C64XX_SPI_SLAVE_SEL		0x0C
 #define S3C64XX_SPI_INT_EN		0x10
 #define S3C64XX_SPI_STATUS		0x14
 #define S3C64XX_SPI_TX_DATA		0x18
 #define S3C64XX_SPI_RX_DATA		0x1C
-#define S3C64XX_SPI_PACKET_CNT	0x20
-#define S3C64XX_SPI_PENDING_CLR	0x24
-#define S3C64XX_SPI_SWAP_CFG	0x28
+#define S3C64XX_SPI_PACKET_CNT		0x20
+#define S3C64XX_SPI_PENDING_CLR		0x24
+#define S3C64XX_SPI_SWAP_CFG		0x28
 #define S3C64XX_SPI_FB_CLK		0x2C
 
 #define S3C64XX_SPI_CH_HS_EN		(1<<6)	/* High Speed Enable */
@@ -77,9 +77,9 @@
 #define S3C64XX_SPI_INT_TX_FIFORDY_EN		(1<<0)
 
 #define S3C64XX_SPI_ST_RX_OVERRUN_ERR		(1<<5)
-#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR	(1<<4)
+#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR		(1<<4)
 #define S3C64XX_SPI_ST_TX_OVERRUN_ERR		(1<<3)
-#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR	(1<<2)
+#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR		(1<<2)
 #define S3C64XX_SPI_ST_RX_FIFORDY		(1<<1)
 #define S3C64XX_SPI_ST_TX_FIFORDY		(1<<0)
 
@@ -100,7 +100,7 @@
 #define S3C64XX_SPI_SWAP_TX_BIT			(1<<1)
 #define S3C64XX_SPI_SWAP_TX_EN			(1<<0)
 
-#define S3C64XX_SPI_FBCLK_MSK		(3<<0)
+#define S3C64XX_SPI_FBCLK_MSK			(3<<0)
 
 #define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id])
 #define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \