docs: hwmon: pxe1610: convert to ReST format and add to the index

This document was recently introduced. Convert it to ReST
just like the other hwmon documents, adding it to the hwmon index.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation/hwmon/index.rst

@@ -130,6 +130,7 @@ Hardware Monitoring Kernel Drivers
    pcf8591
    pmbus
    powr1220
+   pxe1610
    pwm-fan
    raspberrypi-hwmon
    sch5627

Documentation/hwmon/pxe1610 → Documentation/hwmon/pxe1610.rst

@@ -2,19 +2,29 @@ Kernel driver pxe1610
 =====================
 
 Supported chips:
+
   * Infineon PXE1610
+
     Prefix: 'pxe1610'
+
     Addresses scanned: -
+
     Datasheet: Datasheet is not publicly available.
 
   * Infineon PXE1110
+
     Prefix: 'pxe1110'
+
     Addresses scanned: -
+
     Datasheet: Datasheet is not publicly available.
 
   * Infineon PXM1310
+
     Prefix: 'pxm1310'
+
     Addresses scanned: -
+
     Datasheet: Datasheet is not publicly available.
 
 Author: Vijay Khemka <vijaykhemka@fb.com>
@@ -25,14 +35,19 @@ Description
 
 PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers
 and compliant to
-	-- Intel VR13 DC-DC converter specifications.
-	-- Intel SVID protocol.
+
+	- Intel VR13 DC-DC converter specifications.
+	- Intel SVID protocol.
+
 Used for Vcore power regulation for Intel VR13 based microprocessors
-	-- Servers, Workstations, and High-end desktops
+
+	- Servers, Workstations, and High-end desktops
 
 PXM1310 is a Multi-rail Controller and it is compliant to
-	-- Intel VR13 DC-DC converter specifications.
-	-- Intel SVID protocol.
+
+	- Intel VR13 DC-DC converter specifications.
+	- Intel SVID protocol.
+
 Used for DDR3/DDR4 Memory power regulation for Intel VR13 and
 IMVP8 based systems
 
@@ -44,10 +59,10 @@ This driver does not probe for PMBus devices. You will have
 to instantiate devices explicitly.
 
 Example: the following commands will load the driver for an PXE1610
-at address 0x70 on I2C bus #4:
+at address 0x70 on I2C bus #4::
 
-# modprobe pxe1610
-# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+    # modprobe pxe1610
+    # echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
 
 It can also be instantiated by declaring in device tree
 
@@ -55,6 +70,7 @@ It can also be instantiated by declaring in device tree
 Sysfs attributes
 ----------------
 
+======================  ====================================
 curr1_label		"iin"
 curr1_input		Measured input current
 curr1_alarm		Current high alarm
@@ -88,3 +104,4 @@ temp[1-3]_crit		Critical high temperature
 temp[1-3]_crit_alarm	Chip temperature critical high alarm
 temp[1-3]_max		Maximum temperature
 temp[1-3]_max_alarm	Chip temperature high alarm
+======================  ====================================