Commit bfe06aee authored by Hans de Goede's avatar Hans de Goede Committed by Mauro Carvalho Chehab

media: atomisp: gc0310: Remove GC0310_TOK_*

Remove the ability to have special tokens in a reg-list,
GC0310_TOK_DELAY is not used and GC0310_TOK_TERM can be replaced
with ARRAY_SIZE, simplifying the code.
Reviewed-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent 8b6afba5
......@@ -134,6 +134,7 @@ static int gc0310_write_reg(struct i2c_client *client, u16 data_length,
* gc0310_write_reg_array - Initializes a list of GC0310 registers
* @client: i2c driver client structure
* @reglist: list of registers to be written
* @count: number of register, value pairs in the list
*
* This function initializes a list of registers. When consecutive addresses
* are found in a row on the list, this function creates a buffer and sends
......@@ -202,39 +203,28 @@ static int __gc0310_write_reg_is_consecutive(struct i2c_client *client,
}
static int gc0310_write_reg_array(struct i2c_client *client,
const struct gc0310_reg *reglist)
const struct gc0310_reg *reglist, int count)
{
const struct gc0310_reg *next = reglist;
struct gc0310_write_ctrl ctrl;
int err;
int i, err;
ctrl.index = 0;
for (; next->type != GC0310_TOK_TERM; next++) {
switch (next->type & GC0310_TOK_MASK) {
case GC0310_TOK_DELAY:
for (i = 0; i < count; i++) {
/*
* If next address is not consecutive, data needs to be
* flushed before proceed.
*/
if (!__gc0310_write_reg_is_consecutive(client, &ctrl,
&reglist[i])) {
err = __gc0310_flush_reg_array(client, &ctrl);
if (err)
return err;
msleep(next->val);
break;
default:
/*
* If next address is not consecutive, data needs to be
* flushed before proceed.
*/
if (!__gc0310_write_reg_is_consecutive(client, &ctrl,
next)) {
err = __gc0310_flush_reg_array(client, &ctrl);
if (err)
return err;
}
err = __gc0310_buf_reg_array(client, &ctrl, next);
if (err) {
dev_err(&client->dev, "%s: write error, aborted\n",
__func__);
return err;
}
break;
}
err = __gc0310_buf_reg_array(client, &ctrl, &reglist[i]);
if (err) {
dev_err(&client->dev, "%s: write error, aborted\n",
__func__);
return err;
}
}
......@@ -478,7 +468,8 @@ static int gc0310_init(struct v4l2_subdev *sd)
mutex_lock(&dev->input_lock);
/* set initial registers */
ret = gc0310_write_reg_array(client, gc0310_reset_register);
ret = gc0310_write_reg_array(client, gc0310_reset_register,
ARRAY_SIZE(gc0310_reset_register));
/* restore settings */
gc0310_res = gc0310_res_preview;
......@@ -648,7 +639,7 @@ static int startup(struct v4l2_subdev *sd)
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret = 0;
ret = gc0310_write_reg_array(client, dev->res->regs);
ret = gc0310_write_reg_array(client, dev->res->regs, dev->res->reg_count);
if (ret) {
dev_err(&client->dev, "gc0310 write register err.\n");
return ret;
......
......@@ -110,6 +110,7 @@
struct gc0310_resolution {
u8 *desc;
const struct gc0310_reg *regs;
int reg_count;
int res;
int width;
int height;
......@@ -139,9 +140,6 @@ struct gc0310_device {
enum gc0310_tok_type {
GC0310_8BIT = 0x0001,
GC0310_TOK_TERM = 0xf000, /* terminating token for reg list */
GC0310_TOK_DELAY = 0xfe00, /* delay token for reg list */
GC0310_TOK_MASK = 0xfff0
};
/**
......@@ -330,8 +328,6 @@ static const struct gc0310_reg gc0310_reset_register[] = {
{GC0310_8BIT, 0x48, 0x03}, //sun mode
{GC0310_8BIT, 0x4f, 0x60}, //sun_clamp
{GC0310_8BIT, 0xfe, 0x00},
{GC0310_TOK_TERM, 0, 0},
};
static struct gc0310_reg const gc0310_VGA_30fps[] = {
......@@ -356,8 +352,6 @@ static struct gc0310_reg const gc0310_VGA_30fps[] = {
{GC0310_8BIT, 0x13, 0x02},//05 //05 //LWC[15:8]
{GC0310_8BIT, 0xfe, 0x00},
{GC0310_TOK_TERM, 0, 0},
};
static struct gc0310_resolution gc0310_res_preview[] = {
......@@ -374,6 +368,7 @@ static struct gc0310_resolution gc0310_res_preview[] = {
#endif
.skip_frames = 2,
.regs = gc0310_VGA_30fps,
.reg_count = ARRAY_SIZE(gc0310_VGA_30fps),
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment