Commit bfe83844 authored by Daniel Lezcano's avatar Daniel Lezcano Committed by Thomas Gleixner

genirq/timings: Remove variance computation code

The variance computation did not provide the expected results and will be
replaced with a different approach to compute the next interrupt based on
the array suffixes derived algorithm.

There is no good way to transform the variance code to the new algorithm,
so for ease of review remove the existing code first.
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: rjw@rjwysocki.net
Cc: ulf.hansson@linaro.org
Cc: linux-pm@vger.kernel.org
Link: https://lkml.kernel.org/r/20190328151336.5316-1-daniel.lezcano@linaro.org
parent 59c39840
......@@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/idr.h>
#include <linux/irq.h>
#include <linux/math64.h>
#include <trace/events/irq.h>
......@@ -19,13 +18,7 @@ DEFINE_STATIC_KEY_FALSE(irq_timing_enabled);
DEFINE_PER_CPU(struct irq_timings, irq_timings);
struct irqt_stat {
u64 next_evt;
u64 last_ts;
u64 variance;
u32 avg;
u32 nr_samples;
int anomalies;
int valid;
u64 next_evt;
};
static DEFINE_IDR(irqt_stats);
......@@ -40,184 +33,6 @@ void irq_timings_disable(void)
static_branch_disable(&irq_timing_enabled);
}
/**
* irqs_update - update the irq timing statistics with a new timestamp
*
* @irqs: an irqt_stat struct pointer
* @ts: the new timestamp
*
* The statistics are computed online, in other words, the code is
* designed to compute the statistics on a stream of values rather
* than doing multiple passes on the values to compute the average,
* then the variance. The integer division introduces a loss of
* precision but with an acceptable error margin regarding the results
* we would have with the double floating precision: we are dealing
* with nanosec, so big numbers, consequently the mantisse is
* negligeable, especially when converting the time in usec
* afterwards.
*
* The computation happens at idle time. When the CPU is not idle, the
* interrupts' timestamps are stored in the circular buffer, when the
* CPU goes idle and this routine is called, all the buffer's values
* are injected in the statistical model continuying to extend the
* statistics from the previous busy-idle cycle.
*
* The observations showed a device will trigger a burst of periodic
* interrupts followed by one or two peaks of longer time, for
* instance when a SD card device flushes its cache, then the periodic
* intervals occur again. A one second inactivity period resets the
* stats, that gives us the certitude the statistical values won't
* exceed 1x10^9, thus the computation won't overflow.
*
* Basically, the purpose of the algorithm is to watch the periodic
* interrupts and eliminate the peaks.
*
* An interrupt is considered periodically stable if the interval of
* its occurences follow the normal distribution, thus the values
* comply with:
*
* avg - 3 x stddev < value < avg + 3 x stddev
*
* Which can be simplified to:
*
* -3 x stddev < value - avg < 3 x stddev
*
* abs(value - avg) < 3 x stddev
*
* In order to save a costly square root computation, we use the
* variance. For the record, stddev = sqrt(variance). The equation
* above becomes:
*
* abs(value - avg) < 3 x sqrt(variance)
*
* And finally we square it:
*
* (value - avg) ^ 2 < (3 x sqrt(variance)) ^ 2
*
* (value - avg) x (value - avg) < 9 x variance
*
* Statistically speaking, any values out of this interval is
* considered as an anomaly and is discarded. However, a normal
* distribution appears when the number of samples is 30 (it is the
* rule of thumb in statistics, cf. "30 samples" on Internet). When
* there are three consecutive anomalies, the statistics are resetted.
*
*/
static void irqs_update(struct irqt_stat *irqs, u64 ts)
{
u64 old_ts = irqs->last_ts;
u64 variance = 0;
u64 interval;
s64 diff;
/*
* The timestamps are absolute time values, we need to compute
* the timing interval between two interrupts.
*/
irqs->last_ts = ts;
/*
* The interval type is u64 in order to deal with the same
* type in our computation, that prevent mindfuck issues with
* overflow, sign and division.
*/
interval = ts - old_ts;
/*
* The interrupt triggered more than one second apart, that
* ends the sequence as predictible for our purpose. In this
* case, assume we have the beginning of a sequence and the
* timestamp is the first value. As it is impossible to
* predict anything at this point, return.
*
* Note the first timestamp of the sequence will always fall
* in this test because the old_ts is zero. That is what we
* want as we need another timestamp to compute an interval.
*/
if (interval >= NSEC_PER_SEC) {
memset(irqs, 0, sizeof(*irqs));
irqs->last_ts = ts;
return;
}
/*
* Pre-compute the delta with the average as the result is
* used several times in this function.
*/
diff = interval - irqs->avg;
/*
* Increment the number of samples.
*/
irqs->nr_samples++;
/*
* Online variance divided by the number of elements if there
* is more than one sample. Normally the formula is division
* by nr_samples - 1 but we assume the number of element will be
* more than 32 and dividing by 32 instead of 31 is enough
* precise.
*/
if (likely(irqs->nr_samples > 1))
variance = irqs->variance >> IRQ_TIMINGS_SHIFT;
/*
* The rule of thumb in statistics for the normal distribution
* is having at least 30 samples in order to have the model to
* apply. Values outside the interval are considered as an
* anomaly.
*/
if ((irqs->nr_samples >= 30) && ((diff * diff) > (9 * variance))) {
/*
* After three consecutive anomalies, we reset the
* stats as it is no longer stable enough.
*/
if (irqs->anomalies++ >= 3) {
memset(irqs, 0, sizeof(*irqs));
irqs->last_ts = ts;
return;
}
} else {
/*
* The anomalies must be consecutives, so at this
* point, we reset the anomalies counter.
*/
irqs->anomalies = 0;
}
/*
* The interrupt is considered stable enough to try to predict
* the next event on it.
*/
irqs->valid = 1;
/*
* Online average algorithm:
*
* new_average = average + ((value - average) / count)
*
* The variance computation depends on the new average
* to be computed here first.
*
*/
irqs->avg = irqs->avg + (diff >> IRQ_TIMINGS_SHIFT);
/*
* Online variance algorithm:
*
* new_variance = variance + (value - average) x (value - new_average)
*
* Warning: irqs->avg is updated with the line above, hence
* 'interval - irqs->avg' is no longer equal to 'diff'
*/
irqs->variance = irqs->variance + (diff * (interval - irqs->avg));
/*
* Update the next event
*/
irqs->next_evt = ts + irqs->avg;
}
/**
* irq_timings_next_event - Return when the next event is supposed to arrive
*
......@@ -246,12 +61,6 @@ static void irqs_update(struct irqt_stat *irqs, u64 ts)
*/
u64 irq_timings_next_event(u64 now)
{
struct irq_timings *irqts = this_cpu_ptr(&irq_timings);
struct irqt_stat *irqs;
struct irqt_stat __percpu *s;
u64 ts, next_evt = U64_MAX;
int i, irq = 0;
/*
* This function must be called with the local irq disabled in
* order to prevent the timings circular buffer to be updated
......@@ -259,64 +68,7 @@ u64 irq_timings_next_event(u64 now)
*/
lockdep_assert_irqs_disabled();
/*
* Number of elements in the circular buffer: If it happens it
* was flushed before, then the number of elements could be
* smaller than IRQ_TIMINGS_SIZE, so the count is used,
* otherwise the array size is used as we wrapped. The index
* begins from zero when we did not wrap. That could be done
* in a nicer way with the proper circular array structure
* type but with the cost of extra computation in the
* interrupt handler hot path. We choose efficiency.
*
* Inject measured irq/timestamp to the statistical model
* while decrementing the counter because we consume the data
* from our circular buffer.
*/
for (i = irqts->count & IRQ_TIMINGS_MASK,
irqts->count = min(IRQ_TIMINGS_SIZE, irqts->count);
irqts->count > 0; irqts->count--, i = (i + 1) & IRQ_TIMINGS_MASK) {
irq = irq_timing_decode(irqts->values[i], &ts);
s = idr_find(&irqt_stats, irq);
if (s) {
irqs = this_cpu_ptr(s);
irqs_update(irqs, ts);
}
}
/*
* Look in the list of interrupts' statistics, the earliest
* next event.
*/
idr_for_each_entry(&irqt_stats, s, i) {
irqs = this_cpu_ptr(s);
if (!irqs->valid)
continue;
if (irqs->next_evt <= now) {
irq = i;
next_evt = now;
/*
* This interrupt mustn't use in the future
* until new events occur and update the
* statistics.
*/
irqs->valid = 0;
break;
}
if (irqs->next_evt < next_evt) {
irq = i;
next_evt = irqs->next_evt;
}
}
return next_evt;
return 0;
}
void irq_timings_free(int irq)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment