Commit bff5b4b3 authored by Yuiko Oshino's avatar Yuiko Oshino Committed by David S. Miller

net: phy: micrel: add Microchip KSZ9131 initial driver

Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY
Signed-off-by: default avatarYuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c9fbd71f
......@@ -14,7 +14,7 @@
* option) any later version.
*
* Support : Micrel Phys:
* Giga phys: ksz9021, ksz9031
* Giga phys: ksz9021, ksz9031, ksz9131
* 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
* ksz8021, ksz8031, ksz8051,
* ksz8081, ksz8091,
......@@ -609,6 +609,116 @@ static int ksz9031_config_init(struct phy_device *phydev)
return result;
}
#define KSZ9131_SKEW_5BIT_MAX 2400
#define KSZ9131_SKEW_4BIT_MAX 800
#define KSZ9131_OFFSET 700
#define KSZ9131_STEP 100
static int ksz9131_of_load_skew_values(struct phy_device *phydev,
struct device_node *of_node,
u16 reg, size_t field_sz,
char *field[], u8 numfields)
{
int val[4] = {-(1 + KSZ9131_OFFSET), -(2 + KSZ9131_OFFSET),
-(3 + KSZ9131_OFFSET), -(4 + KSZ9131_OFFSET)};
int skewval, skewmax = 0;
int matches = 0;
u16 maxval;
u16 newval;
u16 mask;
int i;
/* psec properties in dts should mean x pico seconds */
if (field_sz == 5)
skewmax = KSZ9131_SKEW_5BIT_MAX;
else
skewmax = KSZ9131_SKEW_4BIT_MAX;
for (i = 0; i < numfields; i++)
if (!of_property_read_s32(of_node, field[i], &skewval)) {
if (skewval < -KSZ9131_OFFSET)
skewval = -KSZ9131_OFFSET;
else if (skewval > skewmax)
skewval = skewmax;
val[i] = skewval + KSZ9131_OFFSET;
matches++;
}
if (!matches)
return 0;
if (matches < numfields)
newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
else
newval = 0;
maxval = (field_sz == 4) ? 0xf : 0x1f;
for (i = 0; i < numfields; i++)
if (val[i] != -(i + 1 + KSZ9131_OFFSET)) {
mask = 0xffff;
mask ^= maxval << (field_sz * i);
newval = (newval & mask) |
(((val[i] / KSZ9131_STEP) & maxval)
<< (field_sz * i));
}
return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
}
static int ksz9131_config_init(struct phy_device *phydev)
{
const struct device *dev = &phydev->mdio.dev;
struct device_node *of_node = dev->of_node;
char *clk_skews[2] = {"rxc-skew-psec", "txc-skew-psec"};
char *rx_data_skews[4] = {
"rxd0-skew-psec", "rxd1-skew-psec",
"rxd2-skew-psec", "rxd3-skew-psec"
};
char *tx_data_skews[4] = {
"txd0-skew-psec", "txd1-skew-psec",
"txd2-skew-psec", "txd3-skew-psec"
};
char *control_skews[2] = {"txen-skew-psec", "rxdv-skew-psec"};
const struct device *dev_walker;
int ret;
dev_walker = &phydev->mdio.dev;
do {
of_node = dev_walker->of_node;
dev_walker = dev_walker->parent;
} while (!of_node && dev_walker);
if (!of_node)
return 0;
ret = ksz9131_of_load_skew_values(phydev, of_node,
MII_KSZ9031RN_CLK_PAD_SKEW, 5,
clk_skews, 2);
if (ret < 0)
return ret;
ret = ksz9131_of_load_skew_values(phydev, of_node,
MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
control_skews, 2);
if (ret < 0)
return ret;
ret = ksz9131_of_load_skew_values(phydev, of_node,
MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
rx_data_skews, 4);
if (ret < 0)
return ret;
ret = ksz9131_of_load_skew_values(phydev, of_node,
MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
tx_data_skews, 4);
if (ret < 0)
return ret;
return 0;
}
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6)
#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4)
......@@ -974,6 +1084,23 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = genphy_suspend,
.resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ9131,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip KSZ9131 Gigabit PHY",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.driver_data = &ksz9021_type,
.probe = kszphy_probe,
.config_init = ksz9131_config_init,
.read_status = ksz9031_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
.suspend = genphy_suspend,
.resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ8873MLL,
.phy_id_mask = MICREL_PHY_ID_MASK,
......@@ -1022,6 +1149,7 @@ MODULE_LICENSE("GPL");
static struct mdio_device_id __maybe_unused micrel_tbl[] = {
{ PHY_ID_KSZ9021, 0x000ffffe },
{ PHY_ID_KSZ9031, MICREL_PHY_ID_MASK },
{ PHY_ID_KSZ9131, MICREL_PHY_ID_MASK },
{ PHY_ID_KSZ8001, 0x00fffffc },
{ PHY_ID_KS8737, MICREL_PHY_ID_MASK },
{ PHY_ID_KSZ8021, 0x00ffffff },
......
......@@ -31,6 +31,7 @@
#define PHY_ID_KSZ8081 0x00221560
#define PHY_ID_KSZ8061 0x00221570
#define PHY_ID_KSZ9031 0x00221620
#define PHY_ID_KSZ9131 0x00221640
#define PHY_ID_KSZ886X 0x00221430
#define PHY_ID_KSZ8863 0x00221435
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment