Commit c01cda4c authored by Nicolae Rosia's avatar Nicolae Rosia Committed by Tony Lindgren

ARM: OMAP4: kill omap4_pmic_init and omap4_pmic_get_config

Last user of these functions was deleted in commit
b42b91 ("ARM: OMAP2+: Remove board-omap4panda.c") during DT transition.
Signed-off-by: default avatarNicolae Rosia <Nicolae_Rosia@mentor.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 1001354c
......@@ -39,7 +39,7 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = {
.flags = I2C_CLIENT_WAKE,
};
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
#if defined(CONFIG_ARCH_OMAP3)
static int twl_set_voltage(void *data, int target_uV)
{
struct voltagedomain *voltdm = (struct voltagedomain *)data;
......@@ -66,25 +66,6 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
#ifdef CONFIG_ARCH_OMAP4
void __init omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct i2c_board_info *devices, int nr_devices)
{
/* PMIC part*/
unsigned int irq;
omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
irq = omap4_xlate_irq(7 + OMAP44XX_IRQ_GIC_START);
omap_pmic_init(1, 400, pmic_type, irq, pmic_data);
/* Register additional devices on i2c1 bus if needed */
if (devices)
i2c_register_board_info(1, devices, nr_devices);
}
#endif
void __init omap_pmic_late_init(void)
{
/* Init the OMAP TWL parameters (if PMIC has been registerd) */
......@@ -241,297 +222,6 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
}
#endif /* CONFIG_ARCH_OMAP3 */
#if defined(CONFIG_ARCH_OMAP4)
static struct twl4030_usb_data omap4_usb_pdata = {
};
static struct regulator_consumer_supply omap4_vdda_hdmi_dac_supplies[] = {
REGULATOR_SUPPLY("vdda_hdmi_dac", "omapdss_hdmi"),
};
static struct regulator_init_data omap4_vdac_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_vdda_hdmi_dac_supplies),
.consumer_supplies = omap4_vdda_hdmi_dac_supplies,
.supply_regulator = "V2V1",
};
static struct regulator_init_data omap4_vaux2_idata = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_vaux3_idata = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_consumer_supply omap4_vmmc_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data omap4_vmmc_idata = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_vmmc_supply),
.consumer_supplies = omap4_vmmc_supply,
};
static struct regulator_init_data omap4_vpp_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_vana_idata = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_consumer_supply omap4_vcxio_supply[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"),
};
static struct regulator_init_data omap4_vcxio_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
.always_on = true,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply),
.consumer_supplies = omap4_vcxio_supply,
.supply_regulator = "V2V1",
};
static struct regulator_init_data omap4_vusb_idata = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_clk32kg_idata = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_consumer_supply omap4_vdd1_supply[] = {
REGULATOR_SUPPLY("vcc", "cpu0"),
};
static struct regulator_consumer_supply omap4_vdd2_supply[] = {
REGULATOR_SUPPLY("vcc", "iva.0"),
};
static struct regulator_consumer_supply omap4_vdd3_supply[] = {
REGULATOR_SUPPLY("vcc", "l3_main.0"),
};
static struct regulator_init_data omap4_vdd1 = {
.constraints = {
.name = "vdd_mpu",
.min_uV = 500000,
.max_uV = 1500000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_vdd1_supply),
.consumer_supplies = omap4_vdd1_supply,
};
static struct regulator_init_data omap4_vdd2 = {
.constraints = {
.name = "vdd_iva",
.min_uV = 500000,
.max_uV = 1500000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_vdd2_supply),
.consumer_supplies = omap4_vdd2_supply,
};
static struct regulator_init_data omap4_vdd3 = {
.constraints = {
.name = "vdd_core",
.min_uV = 500000,
.max_uV = 1500000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_vdd3_supply),
.consumer_supplies = omap4_vdd3_supply,
};
static struct twl_regulator_driver_data omap4_vdd1_drvdata = {
.get_voltage = twl_get_voltage,
.set_voltage = twl_set_voltage,
};
static struct twl_regulator_driver_data omap4_vdd2_drvdata = {
.get_voltage = twl_get_voltage,
.set_voltage = twl_set_voltage,
};
static struct twl_regulator_driver_data omap4_vdd3_drvdata = {
.get_voltage = twl_get_voltage,
.set_voltage = twl_set_voltage,
};
static struct regulator_consumer_supply omap4_v1v8_supply[] = {
REGULATOR_SUPPLY("vio", "1-004b"),
};
static struct regulator_init_data omap4_v1v8_idata = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
.always_on = true,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_v1v8_supply),
.consumer_supplies = omap4_v1v8_supply,
};
static struct regulator_consumer_supply omap4_v2v1_supply[] = {
REGULATOR_SUPPLY("v2v1", "1-004b"),
};
static struct regulator_init_data omap4_v2v1_idata = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_v2v1_supply),
.consumer_supplies = omap4_v2v1_supply,
};
void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags)
{
if (!pmic_data->vdd1) {
omap4_vdd1.driver_data = &omap4_vdd1_drvdata;
omap4_vdd1_drvdata.data = voltdm_lookup("mpu");
pmic_data->vdd1 = &omap4_vdd1;
}
if (!pmic_data->vdd2) {
omap4_vdd2.driver_data = &omap4_vdd2_drvdata;
omap4_vdd2_drvdata.data = voltdm_lookup("iva");
pmic_data->vdd2 = &omap4_vdd2;
}
if (!pmic_data->vdd3) {
omap4_vdd3.driver_data = &omap4_vdd3_drvdata;
omap4_vdd3_drvdata.data = voltdm_lookup("core");
pmic_data->vdd3 = &omap4_vdd3;
}
/* Common platform data configurations */
if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
pmic_data->usb = &omap4_usb_pdata;
/* Common regulator configurations */
if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
pmic_data->vdac = &omap4_vdac_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2)
pmic_data->vaux2 = &omap4_vaux2_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3)
pmic_data->vaux3 = &omap4_vaux3_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc)
pmic_data->vmmc = &omap4_vmmc_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp)
pmic_data->vpp = &omap4_vpp_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana)
pmic_data->vana = &omap4_vana_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio)
pmic_data->vcxio = &omap4_vcxio_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb)
pmic_data->vusb = &omap4_vusb_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
!pmic_data->clk32kg)
pmic_data->clk32kg = &omap4_clk32kg_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8)
pmic_data->v1v8 = &omap4_v1v8_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1)
pmic_data->v2v1 = &omap4_v2v1_idata;
}
#endif /* CONFIG_ARCH_OMAP4 */
#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030)
#include <linux/platform_data/omap-twl4030.h>
......
......@@ -51,16 +51,9 @@ static inline void omap3_pmic_init(const char *pmic_type,
omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
}
void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct i2c_board_info *devices, int nr_devices);
void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
void omap_twl4030_audio_init(char *card_name, struct omap_tw4030_pdata *pdata);
#endif /* __OMAP_PMIC_COMMON__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment