ARM: orion: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the orion include directories
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>

arch/arm/mach-dove/common.c

@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
 #include <plat/time.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"

arch/arm/mach-kirkwood/board-dreamplug.c

@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/board-goflexnet.c

@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/common.c

@@ -26,15 +26,15 @@
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
 #include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
 #include <plat/time.h>
 #include <plat/addr-map.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
 /*****************************************************************************

arch/arm/mach-kirkwood/d2net_v2-setup.c

@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"

arch/arm/mach-kirkwood/db88f6281-bp-setup.c

@@ -17,7 +17,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/dockstar-setup.c

@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/guruplug-setup.c

@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/netspace_v2-setup.c

@@ -34,7 +34,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"

arch/arm/mach-kirkwood/netxbig_v2-setup.c

@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
 #include "common.h"
 #include "mpp.h"
 #include "lacie_v2-common.h"

arch/arm/mach-kirkwood/openrd-setup.c

@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/sheevaplug-setup.c

@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-mv78xx0/common.c

@@ -20,8 +20,8 @@
 #include <mach/mv78xx0.h>
 #include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
-#include <plat/ehci-orion.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>

arch/arm/mach-orion5x/common.c

@@ -30,8 +30,8 @@
 #include <mach/bridge-regs.h>
 #include <mach/hardware.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>

arch/arm/mach-orion5x/db88f5281-setup.c

@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/plat-orion/common.c

@@ -19,8 +19,8 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <net/dsa.h>
-#include <plat/mv_xor.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <mach/bridge-regs.h>
 
 /* Create a clkdev entry for a given device/clk */

drivers/dma/mv_xor.c

@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/memory.h>
 #include <linux/clk.h>
-#include <plat/mv_xor.h>
+#include <linux/platform_data/dma-mv_xor.h>
 
 #include "dmaengine.h"
 #include "mv_xor.h"

drivers/leds/leds-netxbig.c

@@ -28,7 +28,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <mach/leds-netxbig.h>
+#include <linux/platform_data/leds-kirkwood-netxbig.h>
 
 /*
  * GPIO extension bus.

drivers/leds/leds-ns2.c

@@ -29,7 +29,7 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/module.h>
-#include <mach/leds-ns2.h>
+#include <linux/platform_data/leds-kirkwood-ns2.h>
 
 /*
  * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in

drivers/mmc/host/mvsdio.c

@@ -25,7 +25,7 @@
 
 #include <asm/sizes.h>
 #include <asm/unaligned.h>
-#include <plat/mvsdio.h>
+#include <linux/platform_data/mmc-mvsdio.h>
 
 #include "mvsdio.h"
 

drivers/mtd/nand/orion_nand.c

@@ -22,7 +22,7 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <mach/hardware.h>
-#include <plat/orion_nand.h>
+#include <linux/platform_data/mtd-orion_nand.h>
 
 static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {

drivers/usb/host/ehci-orion.c

@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/mbus.h>
 #include <linux/clk.h>
-#include <plat/ehci-orion.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 
 #define rdl(off)	__raw_readl(hcd->regs + (off))
 #define wrl(off, val)	__raw_writel((val), hcd->regs + (off))

sound/soc/kirkwood/kirkwood-i2s.c

@@ -21,7 +21,7 @@
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
 #include "kirkwood.h"
 
 #define DRV_NAME	"kirkwood-i2s"

sound/soc/kirkwood/kirkwood-openrd.c

@@ -17,7 +17,7 @@
 #include <linux/slab.h>
 #include <sound/soc.h>
 #include <mach/kirkwood.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
 #include <asm/mach-types.h>
 #include "../codecs/cs42l51.h"
 

sound/soc/kirkwood/kirkwood-t5325.c

@@ -16,7 +16,7 @@
 #include <linux/slab.h>
 #include <sound/soc.h>
 #include <mach/kirkwood.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-kirkwood.h>
 #include <asm/mach-types.h>
 #include "../codecs/alc5623.h"