Commit c0f3a317 authored by Johannes Berg's avatar Johannes Berg

Merge remote-tracking branch 'mac80211/master' into HEAD

There are a few things that would otherwise conflict.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parents 6dbe51c2 801d929c
......@@ -3285,6 +3285,7 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_chanctx_conf *chanctx_conf;
int ret = -ENODATA;
......@@ -3293,6 +3294,16 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy,
if (chanctx_conf) {
*chandef = chanctx_conf->def;
ret = 0;
} else if (local->open_count > 0 &&
local->open_count == local->monitors &&
sdata->vif.type == NL80211_IFTYPE_MONITOR) {
if (local->use_chanctx)
*chandef = local->monitor_chandef;
else
cfg80211_chandef_create(chandef,
local->_oper_channel,
local->_oper_channel_type);
ret = 0;
}
rcu_read_unlock();
......
......@@ -107,7 +107,7 @@ void ieee80211_recalc_idle(struct ieee80211_local *local)
lockdep_assert_held(&local->mtx);
active = !list_empty(&local->chanctx_list);
active = !list_empty(&local->chanctx_list) || local->monitors;
if (!local->ops->remain_on_channel) {
list_for_each_entry(roc, &local->roc_list, list) {
......@@ -541,6 +541,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
ieee80211_adjust_monitor_flags(sdata, 1);
ieee80211_configure_filter(local);
mutex_lock(&local->mtx);
ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
netif_carrier_on(dev);
break;
......@@ -812,6 +815,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
ieee80211_adjust_monitor_flags(sdata, -1);
ieee80211_configure_filter(local);
mutex_lock(&local->mtx);
ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
break;
case NL80211_IFTYPE_P2P_DEVICE:
/* relies on synchronize_rcu() below */
......
......@@ -647,6 +647,9 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) &
mask) >> shift;
if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED)
continue;
switch (ap_mcs) {
default:
if (our_mcs <= ap_mcs)
......@@ -3502,6 +3505,14 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
/*
* Stop timers before deleting work items, as timers
* could race and re-add the work-items. They will be
* re-established on connection.
*/
del_timer_sync(&ifmgd->conn_mon_timer);
del_timer_sync(&ifmgd->bcn_mon_timer);
/*
* we need to use atomic bitops for the running bits
* only because both timers might fire at the same
......@@ -3516,13 +3527,9 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
if (del_timer_sync(&ifmgd->timer))
set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
cancel_work_sync(&ifmgd->chswitch_work);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
/* these will just be re-established on connection */
del_timer_sync(&ifmgd->conn_mon_timer);
del_timer_sync(&ifmgd->bcn_mon_timer);
cancel_work_sync(&ifmgd->chswitch_work);
}
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
......@@ -4315,6 +4322,17 @@ void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
/*
* Make sure some work items will not run after this,
* they will not do anything but might not have been
* cancelled when disconnecting.
*/
cancel_work_sync(&ifmgd->monitor_work);
cancel_work_sync(&ifmgd->beacon_connection_loss_work);
cancel_work_sync(&ifmgd->request_smps_work);
cancel_work_sync(&ifmgd->csa_connection_drop_work);
cancel_work_sync(&ifmgd->chswitch_work);
mutex_lock(&ifmgd->mtx);
if (ifmgd->assoc_data)
ieee80211_destroy_assoc_data(sdata, false);
......
......@@ -1231,34 +1231,40 @@ static bool ieee80211_tx_frags(struct ieee80211_local *local,
if (local->queue_stop_reasons[q] ||
(!txpending && !skb_queue_empty(&local->pending[q]))) {
if (unlikely(info->flags &
IEEE80211_TX_INTFL_OFFCHAN_TX_OK &&
local->queue_stop_reasons[q] &
~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL))) {
IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) {
if (local->queue_stop_reasons[q] &
~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL)) {
/*
* Drop off-channel frames if queues
* are stopped for any reason other
* than off-channel operation. Never
* queue them.
*/
spin_unlock_irqrestore(
&local->queue_stop_reason_lock,
flags);
ieee80211_purge_tx_queue(&local->hw,
skbs);
return true;
}
} else {
/*
* Drop off-channel frames if queues are stopped
* for any reason other than off-channel
* operation. Never queue them.
* Since queue is stopped, queue up frames for
* later transmission from the tx-pending
* tasklet when the queue is woken again.
*/
spin_unlock_irqrestore(
&local->queue_stop_reason_lock, flags);
ieee80211_purge_tx_queue(&local->hw, skbs);
return true;
if (txpending)
skb_queue_splice_init(skbs,
&local->pending[q]);
else
skb_queue_splice_tail_init(skbs,
&local->pending[q]);
spin_unlock_irqrestore(&local->queue_stop_reason_lock,
flags);
return false;
}
/*
* Since queue is stopped, queue up frames for later
* transmission from the tx-pending tasklet when the
* queue is woken again.
*/
if (txpending)
skb_queue_splice_init(skbs, &local->pending[q]);
else
skb_queue_splice_tail_init(skbs,
&local->pending[q]);
spin_unlock_irqrestore(&local->queue_stop_reason_lock,
flags);
return false;
}
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
......@@ -1844,9 +1850,24 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
}
if (!is_multicast_ether_addr(skb->data)) {
struct sta_info *next_hop;
bool mpp_lookup = true;
mpath = mesh_path_lookup(sdata, skb->data);
if (!mpath)
if (mpath) {
mpp_lookup = false;
next_hop = rcu_dereference(mpath->next_hop);
if (!next_hop ||
!(mpath->flags & (MESH_PATH_ACTIVE |
MESH_PATH_RESOLVING)))
mpp_lookup = true;
}
if (mpp_lookup)
mppath = mpp_path_lookup(sdata, skb->data);
if (mppath && mpath)
mesh_path_del(mpath->sdata, mpath->dst);
}
/*
......@@ -2350,9 +2371,9 @@ static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata,
if (local->tim_in_locked_section) {
__ieee80211_beacon_add_tim(sdata, ps, skb);
} else {
spin_lock(&local->tim_lock);
spin_lock_bh(&local->tim_lock);
__ieee80211_beacon_add_tim(sdata, ps, skb);
spin_unlock(&local->tim_lock);
spin_unlock_bh(&local->tim_lock);
}
return 0;
......@@ -2724,7 +2745,8 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw,
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
}
sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
if (!ieee80211_tx_prepare(sdata, &tx, skb))
break;
dev_kfree_skb_any(skb);
......
......@@ -367,8 +367,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
rdev->wiphy.rts_threshold = (u32) -1;
rdev->wiphy.coverage_class = 0;
rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH |
NL80211_FEATURE_ADVERTISE_CHAN_LIMITS;
rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH;
return &rdev->wiphy;
}
......
......@@ -554,27 +554,8 @@ static int nl80211_msg_put_channel(struct sk_buff *msg,
if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_IBSS))
goto nla_put_failure;
if (chan->flags & IEEE80211_CHAN_RADAR) {
u32 time = elapsed_jiffies_msecs(chan->dfs_state_entered);
if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_STATE,
chan->dfs_state))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME, time))
goto nla_put_failure;
}
if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ))
if ((chan->flags & IEEE80211_CHAN_RADAR) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
......@@ -900,9 +881,6 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy,
nla_put_u32(msg, NL80211_IFACE_COMB_MAXNUM,
c->max_interfaces))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
c->radar_detect_widths))
goto nla_put_failure;
nla_nest_end(msg, nl_combi);
}
......@@ -914,48 +892,6 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy,
return -ENOBUFS;
}
#ifdef CONFIG_PM
static int nl80211_send_wowlan_tcp_caps(struct cfg80211_registered_device *rdev,
struct sk_buff *msg)
{
const struct wiphy_wowlan_tcp_support *tcp = rdev->wiphy.wowlan.tcp;
struct nlattr *nl_tcp;
if (!tcp)
return 0;
nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION);
if (!nl_tcp)
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD,
tcp->data_payload_max))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD,
tcp->data_payload_max))
return -ENOBUFS;
if (tcp->seq && nla_put_flag(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ))
return -ENOBUFS;
if (tcp->tok && nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
sizeof(*tcp->tok), tcp->tok))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL,
tcp->data_interval_max))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
tcp->wake_payload_max))
return -ENOBUFS;
nla_nest_end(msg, nl_tcp);
return 0;
}
#endif
static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flags,
struct cfg80211_registered_device *dev)
{
......@@ -1330,9 +1266,6 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
goto nla_put_failure;
}
if (nl80211_send_wowlan_tcp_caps(dev, msg))
goto nla_put_failure;
nla_nest_end(msg, nl_wowlan);
}
#endif
......@@ -1365,15 +1298,6 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
dev->wiphy.max_acl_mac_addrs))
goto nla_put_failure;
if (dev->wiphy.extended_capabilities &&
(nla_put(msg, NL80211_ATTR_EXT_CAPA,
dev->wiphy.extended_capabilities_len,
dev->wiphy.extended_capabilities) ||
nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK,
dev->wiphy.extended_capabilities_len,
dev->wiphy.extended_capabilities_mask)))
goto nla_put_failure;
return genlmsg_end(msg, hdr);
nla_put_failure:
......@@ -1383,7 +1307,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
{
int idx = 0;
int idx = 0, ret;
int start = cb->args[0];
struct cfg80211_registered_device *dev;
......@@ -1393,9 +1317,29 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
continue;
if (++idx <= start)
continue;
if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
dev) < 0) {
ret = nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
dev);
if (ret < 0) {
/*
* If sending the wiphy data didn't fit (ENOBUFS or
* EMSGSIZE returned), this SKB is still empty (so
* it's not too big because another wiphy dataset is
* already in the skb) and we've not tried to adjust
* the dump allocation yet ... then adjust the alloc
* size to be bigger, and return 1 but with the empty
* skb. This results in an empty message being RX'ed
* in userspace, but that is ignored.
*
* We can then retry with the larger buffer.
*/
if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
!skb->len &&
cb->min_dump_alloc < 4096) {
cb->min_dump_alloc = 4096;
mutex_unlock(&cfg80211_mutex);
return 1;
}
idx--;
break;
}
......@@ -1412,7 +1356,7 @@ static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info)
struct sk_buff *msg;
struct cfg80211_registered_device *dev = info->user_ptr[0];
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
msg = nlmsg_new(4096, GFP_KERNEL);
if (!msg)
return -ENOMEM;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment