Merge commit 'gcl/gcl-next'

arch/powerpc/boot/cuboot-52xx.c

@@ -37,6 +37,10 @@ static void platform_fixups(void)
 	 * this can do a simple path lookup.
 	 */
 	soc = find_node_by_devtype(NULL, "soc");
+	if (!soc)
+		soc = find_node_by_compatible(NULL, "fsl,mpc5200-immr");
+	if (!soc)
+		soc = find_node_by_compatible(NULL, "fsl,mpc5200b-immr");
 	if (soc) {
 		setprop(soc, "bus-frequency", &bd.bi_ipbfreq,
 			sizeof(bd.bi_ipbfreq));

arch/powerpc/platforms/52xx/mpc52xx_common.c

@@ -99,11 +99,14 @@ mpc5200_setup_xlb_arbiter(void)
 	out_be32(&xlb->master_pri_enable, 0xff);
 	out_be32(&xlb->master_priority, 0x11111111);
 
-	/* Disable XLB pipelining
+	/*
+	 * Disable XLB pipelining
 	 * (cfr errate 292. We could do this only just before ATA PIO
 	 *  transaction and re-enable it afterwards ...)
+	 * Not needed on MPC5200B.
 	 */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
+	if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR)
+		out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
 
 	iounmap(xlb);
 }

drivers/net/fec_mpc52xx_phy.c

@@ -2,6 +2,7 @@
  * Driver for the MPC5200 Fast Ethernet Controller - MDIO bus driver
  *
  * Copyright (C) 2007  Domen Puncer, Telargo, Inc.
+ * Copyright (C) 2008  Wolfram Sang, Pengutronix
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -21,58 +22,45 @@ struct mpc52xx_fec_mdio_priv {
 	struct mpc52xx_fec __iomem *regs;
 };
 
-static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
+		int reg, u32 value)
 {
 	struct mpc52xx_fec_mdio_priv *priv = bus->priv;
 	struct mpc52xx_fec __iomem *fec;
 	int tries = 100;
-	u32 request = FEC_MII_READ_FRAME;
+
+	value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
+	value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
 
 	fec = priv->regs;
 	out_be32(&fec->ievent, FEC_IEVENT_MII);
-
-	request |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
-	request |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
-
-	out_be32(&priv->regs->mii_data, request);
+	out_be32(&priv->regs->mii_data, value);
 
 	/* wait for it to finish, this takes about 23 us on lite5200b */
 	while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
 		udelay(5);
 
-	if (tries == 0)
+	if (!tries)
 		return -ETIMEDOUT;
 
-	return in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK;
+	return value & FEC_MII_DATA_OP_RD ?
+		in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK : 0;
 }
 
-static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 data)
+static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 {
-	struct mpc52xx_fec_mdio_priv *priv = bus->priv;
-	struct mpc52xx_fec __iomem *fec;
-	u32 value = data;
-	int tries = 100;
-
-	fec = priv->regs;
-	out_be32(&fec->ievent, FEC_IEVENT_MII);
-
-	value |= FEC_MII_WRITE_FRAME;
-	value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
-	value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
-
-	out_be32(&priv->regs->mii_data, value);
-
-	/* wait for request to finish */
-	while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
-		udelay(5);
-
-	if (tries == 0)
-		return -ETIMEDOUT;
+	return mpc52xx_fec_mdio_transfer(bus, phy_id, reg, FEC_MII_READ_FRAME);
+}
 
-	return 0;
+static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg,
+		u16 data)
+{
+	return mpc52xx_fec_mdio_transfer(bus, phy_id, reg,
+		data | FEC_MII_WRITE_FRAME);
 }
 
-static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_id *match)
+static int mpc52xx_fec_mdio_probe(struct of_device *of,
+		const struct of_device_id *match)
 {
 	struct device *dev = &of->dev;
 	struct device_node *np = of->node;
@@ -131,7 +119,8 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_i
 	dev_set_drvdata(dev, bus);
 
 	/* set MII speed */
-	out_be32(&priv->regs->mii_speed, ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
+	out_be32(&priv->regs->mii_speed,
+		((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
 
 	/* enable MII interrupt */
 	out_be32(&priv->regs->imask, in_be32(&priv->regs->imask) | FEC_IMASK_MII);