Commit c130bd6f authored by Tony Luck's avatar Tony Luck Committed by Len Brown

acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec

ACPI 5.0 provides extensions to the EINJ mechanism to specify the
target for the error injection - by APICID for cpu related errors,
by address for memory related errors, and by segment/bus/device/function
for PCIe related errors. Also extensions for vendor specific error
injections.
Tested-by: default avatarChen Gong <gong.chen@linux.intel.com>
Signed-off-by: default avatarTony Luck <tony.luck@intel.com>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent 805a6af8
......@@ -47,20 +47,53 @@ directory apei/einj. The following files are provided.
- param1
This file is used to set the first error parameter value. Effect of
parameter depends on error_type specified. For memory error, this is
physical memory address. Only available if param_extension module
parameter is specified.
parameter depends on error_type specified.
- param2
This file is used to set the second error parameter value. Effect of
parameter depends on error_type specified. For memory error, this is
physical memory address mask. Only available if param_extension
module parameter is specified.
parameter depends on error_type specified.
BIOS versions based in the ACPI 4.0 specification have limited options
to control where the errors are injected. Your BIOS may support an
extension (enabled with the param_extension=1 module parameter, or
boot command line einj.param_extension=1). This allows the address
and mask for memory injections to be specified by the param1 and
param2 files in apei/einj.
BIOS versions using the ACPI 5.0 specification have more control over
the target of the injection. For processor related errors (type 0x1,
0x2 and 0x4) the APICID of the target should be provided using the
param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20)
the address is set using param1 with a mask in param2 (0x0 is equivalent
to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the
segment, bus, device and function are specified using param1:
31 24 23 16 15 11 10 8 7 0
+-------------------------------------------------+
| segment | bus | device | function | reserved |
+-------------------------------------------------+
An ACPI 5.0 BIOS may also allow vendor specific errors to be injected.
In this case a file named vendor will contain identifying information
from the BIOS that hopefully will allow an application wishing to use
the vendor specific extension to tell that they are running on a BIOS
that supports it. All vendor extensions have the 0x80000000 bit set in
error_type. A file vendor_flags controls the interpretation of param1
and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor
documentation for details (and expect changes to this API if vendors
creativity in using this feature expands beyond our expectations).
Example:
# cd /sys/kernel/debug/apei/einj
# cat available_error_type # See which errors can be injected
0x00000002 Processor Uncorrectable non-fatal
0x00000008 Memory Correctable
0x00000010 Memory Uncorrectable non-fatal
# echo 0x12345000 > param1 # Set memory address for injection
# echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page
# echo 0x8 > error_type # Choose correctable memory error
# echo 1 > error_inject # Inject now
Injecting parameter support is a BIOS version specific extension, that
is, it only works on some BIOS version. If you want to use it, please
make sure your BIOS version has the proper support and specify
"param_extension=y" in module parameter.
For more information about EINJ, please refer to ACPI specification
version 4.0, section 17.5.
version 4.0, section 17.5 and ACPI 5.0, section 18.6.
......@@ -42,6 +42,42 @@
/* Firmware should respond within 1 milliseconds */
#define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC)
/*
* ACPI version 5 provides a SET_ERROR_TYPE_WITH_ADDRESS action.
*/
static int acpi5;
struct set_error_type_with_address {
u32 type;
u32 vendor_extension;
u32 flags;
u32 apicid;
u64 memory_address;
u64 memory_address_range;
u32 pcie_sbdf;
};
enum {
SETWA_FLAGS_APICID = 1,
SETWA_FLAGS_MEM = 2,
SETWA_FLAGS_PCIE_SBDF = 4,
};
/*
* Vendor extensions for platform specific operations
*/
struct vendor_error_type_extension {
u32 length;
u32 pcie_sbdf;
u16 vendor_id;
u16 device_id;
u8 rev_id;
u8 reserved[3];
};
static u32 vendor_flags;
static struct debugfs_blob_wrapper vendor_blob;
static char vendor_dev[64];
/*
* Some BIOSes allow parameters to the SET_ERROR_TYPE entries in the
* EINJ table through an unpublished extension. Use with caution as
......@@ -103,7 +139,14 @@ static struct apei_exec_ins_type einj_ins_type[] = {
*/
static DEFINE_MUTEX(einj_mutex);
static struct einj_parameter *einj_param;
static void *einj_param;
#ifndef readq
static inline __u64 readq(volatile void __iomem *addr)
{
return ((__u64)readl(addr+4) << 32) + readl(addr);
}
#endif
#ifndef writeq
static inline void writeq(__u64 val, volatile void __iomem *addr)
......@@ -158,10 +201,31 @@ static int einj_timedout(u64 *t)
return 0;
}
static u64 einj_get_parameter_address(void)
static void check_vendor_extension(u64 paddr,
struct set_error_type_with_address *v5param)
{
int offset = readl(&v5param->vendor_extension);
struct vendor_error_type_extension *v;
u32 sbdf;
if (!offset)
return;
v = ioremap(paddr + offset, sizeof(*v));
if (!v)
return;
sbdf = readl(&v->pcie_sbdf);
sprintf(vendor_dev, "%x:%x:%x.%x vendor_id=%x device_id=%x rev_id=%x\n",
sbdf >> 24, (sbdf >> 16) & 0xff,
(sbdf >> 11) & 0x1f, (sbdf >> 8) & 0x7,
readw(&v->vendor_id), readw(&v->device_id),
readb(&v->rev_id));
iounmap(v);
}
static void *einj_get_parameter_address(void)
{
int i;
u64 paddr = 0;
u64 paddrv4 = 0, paddrv5 = 0;
struct acpi_whea_header *entry;
entry = EINJ_TAB_ENTRY(einj_tab);
......@@ -170,12 +234,40 @@ static u64 einj_get_parameter_address(void)
entry->instruction == ACPI_EINJ_WRITE_REGISTER &&
entry->register_region.space_id ==
ACPI_ADR_SPACE_SYSTEM_MEMORY)
memcpy(&paddr, &entry->register_region.address,
sizeof(paddr));
memcpy(&paddrv4, &entry->register_region.address,
sizeof(paddrv4));
if (entry->action == ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS &&
entry->instruction == ACPI_EINJ_WRITE_REGISTER &&
entry->register_region.space_id ==
ACPI_ADR_SPACE_SYSTEM_MEMORY)
memcpy(&paddrv5, &entry->register_region.address,
sizeof(paddrv5));
entry++;
}
if (paddrv5) {
struct set_error_type_with_address *v5param;
v5param = ioremap(paddrv5, sizeof(*v5param));
if (v5param) {
acpi5 = 1;
check_vendor_extension(paddrv5, v5param);
return v5param;
}
}
if (paddrv4) {
struct einj_parameter *v4param;
v4param = ioremap(paddrv4, sizeof(*v4param));
if (!v4param)
return 0;
if (readq(&v4param->reserved1) || readq(&v4param->reserved2)) {
iounmap(v4param);
return 0;
}
return v4param;
}
return paddr;
return 0;
}
/* do sanity check to trigger table */
......@@ -293,12 +385,56 @@ static int __einj_error_inject(u32 type, u64 param1, u64 param2)
if (rc)
return rc;
apei_exec_ctx_set_input(&ctx, type);
rc = apei_exec_run(&ctx, ACPI_EINJ_SET_ERROR_TYPE);
if (rc)
return rc;
if (einj_param) {
writeq(param1, &einj_param->param1);
writeq(param2, &einj_param->param2);
if (acpi5) {
struct set_error_type_with_address *v5param = einj_param;
writel(type, &v5param->type);
if (type & 0x80000000) {
switch (vendor_flags) {
case SETWA_FLAGS_APICID:
writel(param1, &v5param->apicid);
break;
case SETWA_FLAGS_MEM:
writeq(param1, &v5param->memory_address);
writeq(param2, &v5param->memory_address_range);
break;
case SETWA_FLAGS_PCIE_SBDF:
writel(param1, &v5param->pcie_sbdf);
break;
}
writel(vendor_flags, &v5param->flags);
} else {
switch (type) {
case ACPI_EINJ_PROCESSOR_CORRECTABLE:
case ACPI_EINJ_PROCESSOR_UNCORRECTABLE:
case ACPI_EINJ_PROCESSOR_FATAL:
writel(param1, &v5param->apicid);
writel(SETWA_FLAGS_APICID, &v5param->flags);
break;
case ACPI_EINJ_MEMORY_CORRECTABLE:
case ACPI_EINJ_MEMORY_UNCORRECTABLE:
case ACPI_EINJ_MEMORY_FATAL:
writeq(param1, &v5param->memory_address);
writeq(param2, &v5param->memory_address_range);
writel(SETWA_FLAGS_MEM, &v5param->flags);
break;
case ACPI_EINJ_PCIX_CORRECTABLE:
case ACPI_EINJ_PCIX_UNCORRECTABLE:
case ACPI_EINJ_PCIX_FATAL:
writel(param1, &v5param->pcie_sbdf);
writel(SETWA_FLAGS_PCIE_SBDF, &v5param->flags);
break;
}
}
} else {
rc = apei_exec_run(&ctx, ACPI_EINJ_SET_ERROR_TYPE);
if (rc)
return rc;
if (einj_param) {
struct einj_parameter *v4param = einj_param;
writeq(param1, &v4param->param1);
writeq(param2, &v4param->param2);
}
}
rc = apei_exec_run(&ctx, ACPI_EINJ_EXECUTE_OPERATION);
if (rc)
......@@ -408,15 +544,25 @@ static int error_type_set(void *data, u64 val)
{
int rc;
u32 available_error_type = 0;
u32 tval, vendor;
/*
* Vendor defined types have 0x80000000 bit set, and
* are not enumerated by ACPI_EINJ_GET_ERROR_TYPE
*/
vendor = val & 0x80000000;
tval = val & 0x7fffffff;
/* Only one error type can be specified */
if (val & (val - 1))
return -EINVAL;
rc = einj_get_available_error_type(&available_error_type);
if (rc)
return rc;
if (!(val & available_error_type))
if (tval & (tval - 1))
return -EINVAL;
if (!vendor) {
rc = einj_get_available_error_type(&available_error_type);
if (rc)
return rc;
if (!(val & available_error_type))
return -EINVAL;
}
error_type = val;
return 0;
......@@ -455,7 +601,6 @@ static int einj_check_table(struct acpi_table_einj *einj_tab)
static int __init einj_init(void)
{
int rc;
u64 param_paddr;
acpi_status status;
struct dentry *fentry;
struct apei_exec_context ctx;
......@@ -509,23 +654,30 @@ static int __init einj_init(void)
rc = apei_exec_pre_map_gars(&ctx);
if (rc)
goto err_release;
if (param_extension) {
param_paddr = einj_get_parameter_address();
if (param_paddr) {
einj_param = ioremap(param_paddr, sizeof(*einj_param));
rc = -ENOMEM;
if (!einj_param)
goto err_unmap;
fentry = debugfs_create_x64("param1", S_IRUSR | S_IWUSR,
einj_debug_dir, &error_param1);
if (!fentry)
goto err_unmap;
fentry = debugfs_create_x64("param2", S_IRUSR | S_IWUSR,
einj_debug_dir, &error_param2);
if (!fentry)
goto err_unmap;
} else
pr_warn(EINJ_PFX "Parameter extension is not supported.\n");
einj_param = einj_get_parameter_address();
if ((param_extension || acpi5) && einj_param) {
fentry = debugfs_create_x64("param1", S_IRUSR | S_IWUSR,
einj_debug_dir, &error_param1);
if (!fentry)
goto err_unmap;
fentry = debugfs_create_x64("param2", S_IRUSR | S_IWUSR,
einj_debug_dir, &error_param2);
if (!fentry)
goto err_unmap;
}
if (vendor_dev[0]) {
vendor_blob.data = vendor_dev;
vendor_blob.size = strlen(vendor_dev);
fentry = debugfs_create_blob("vendor", S_IRUSR,
einj_debug_dir, &vendor_blob);
if (!fentry)
goto err_unmap;
fentry = debugfs_create_x32("vendor_flags", S_IRUSR | S_IWUSR,
einj_debug_dir, &vendor_flags);
if (!fentry)
goto err_unmap;
}
pr_info(EINJ_PFX "Error INJection is initialized.\n");
......
......@@ -228,7 +228,8 @@ enum acpi_einj_actions {
ACPI_EINJ_EXECUTE_OPERATION = 5,
ACPI_EINJ_CHECK_BUSY_STATUS = 6,
ACPI_EINJ_GET_COMMAND_STATUS = 7,
ACPI_EINJ_ACTION_RESERVED = 8, /* 8 and greater are reserved */
ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS = 8,
ACPI_EINJ_ACTION_RESERVED = 9, /* 9 and greater are reserved */
ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment