Commit c18b78ed authored by Manish Dusane's avatar Manish Dusane Committed by James Bottomley

[SCSI] qla4xxx: Take E-port out of reset before disabling pause frames

Problem Description:
Disabling pause frames might cause hardware wedging needing a power cycle.
This might happen if the Eport is not initialized and is in reset.

Solution:
Before disabling pause frames ensure that eport is out of reset.
Signed-off-by: default avatarManish Dusane <manish.dusane@qlogic.com>
Signed-off-by: default avatarVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 27db682b
......@@ -1629,9 +1629,37 @@ static void __qla4_83xx_disable_pause(struct scsi_qla_host *ha)
ql4_printk(KERN_INFO, ha, "Disabled pause frames successfully.\n");
}
/**
* qla4_83xx_eport_init - Initialize EPort.
* @ha: Pointer to host adapter structure.
*
* If EPort hardware is in reset state before disabling pause, there would be
* serious hardware wedging issues. To prevent this perform eport init everytime
* before disabling pause frames.
**/
static void qla4_83xx_eport_init(struct scsi_qla_host *ha)
{
/* Clear the 8 registers */
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_REG, 0x0);
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_PORT0, 0x0);
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_PORT1, 0x0);
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_PORT2, 0x0);
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_PORT3, 0x0);
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_SRE_SHIM, 0x0);
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_EPG_SHIM, 0x0);
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_ETHER_PCS, 0x0);
/* Write any value to Reset Control register */
qla4_83xx_wr_reg_indirect(ha, QLA83XX_RESET_CONTROL, 0xFF);
ql4_printk(KERN_INFO, ha, "EPORT is out of reset.\n");
}
void qla4_83xx_disable_pause(struct scsi_qla_host *ha)
{
ha->isp_ops->idc_lock(ha);
/* Before disabling pause frames, ensure that eport is not in reset */
qla4_83xx_eport_init(ha);
qla4_83xx_dump_pause_control_regs(ha);
__qla4_83xx_disable_pause(ha);
ha->isp_ops->idc_unlock(ha);
......
......@@ -55,6 +55,16 @@
#define QLA83XX_SET_PAUSE_VAL 0x0
#define QLA83XX_SET_TC_MAX_CELL_VAL 0x03FF03FF
#define QLA83XX_RESET_CONTROL 0x28084E50
#define QLA83XX_RESET_REG 0x28084E60
#define QLA83XX_RESET_PORT0 0x28084E70
#define QLA83XX_RESET_PORT1 0x28084E80
#define QLA83XX_RESET_PORT2 0x28084E90
#define QLA83XX_RESET_PORT3 0x28084EA0
#define QLA83XX_RESET_SRE_SHIM 0x28084EB0
#define QLA83XX_RESET_EPG_SHIM 0x28084EC0
#define QLA83XX_RESET_ETHER_PCS 0x28084ED0
/* qla_83xx_reg_tbl registers */
#define QLA83XX_PEG_HALT_STATUS1 0x34A8
#define QLA83XX_PEG_HALT_STATUS2 0x34AC
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment