Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677',...

Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677', 'asoc/topic/s6000', 'asoc/topic/samsung' and 'asoc/topic/sh-fsi' into asoc-next

Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt

+Samsung Exynos Odroid X2/U3 audio complex with MAX98090 codec
+
+Required properties:
+ - compatible : "samsung,odroidx2-audio" - for Odroid X2 board,
+		"samsung,odroidu3-audio" - for Odroid U3 board
+ - samsung,model : the user-visible name of this sound complex
+ - samsung,i2s-controller : the phandle of the I2S controller
+ - samsung,audio-codec : the phandle of the MAX98090 audio codec
+ - samsung,audio-routing : a list of the connections between audio
+   components;  each entry is a pair of strings, the first being the
+   connection's sink, the second being the connection's source;
+   valid names for sources and sinks are the MAX98090's pins (as
+   documented in its binding), and the jacks on the board
+   For Odroid X2:
+     * Headphone Jack
+     * Mic Jack
+     * DMIC
+
+   For Odroid U3:
+     * Headphone Jack
+     * Speakers
+
+Example:
+
+sound {
+	compatible = "samsung,odroidu3-audio";
+	samsung,i2s-controller = <&i2s0>;
+	samsung,audio-codec = <&max98090>;
+	samsung,model = "Odroid-X2";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"IN1", "Mic Jack",
+		"Mic Jack", "MICBIAS";
+};

Documentation/devicetree/bindings/sound/snow.txt

@@ -3,15 +3,20 @@ Audio Binding for Snow boards
 Required properties:
 - compatible : Can be one of the following,
 			"google,snow-audio-max98090" or
+			"google,snow-audio-max98091" or
 			"google,snow-audio-max98095"
 - samsung,i2s-controller: The phandle of the Samsung I2S controller
 - samsung,audio-codec: The phandle of the audio codec
 
+Optional:
+- samsung,model: The name of the sound-card
+
 Example:
 
 sound {
 		compatible = "google,snow-audio-max98095";
 
+		samsung,model = "Snow-I2S-MAX98095";
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98095>;
 };

include/linux/platform_data/asoc-s3c.h

@@ -15,15 +15,6 @@
 #define S3C64XX_AC97_GPE  1
 extern void s3c64xx_ac97_setup_gpio(int);
 
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD  0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
 struct samsung_i2s {
 /* If the Primary DAI has 5.1 Channels */
 #define QUIRK_PRI_6CHAN		(1 << 0)

include/sound/rt5670.h

+/*
+ * linux/sound/rt5670.h -- Platform data for RT5670
+ *
+ * Copyright 2014 Realtek Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_RT5670_H
+#define __LINUX_SND_RT5670_H
+
+struct rt5670_platform_data {
+	int jd_mode;
+	bool in2_diff;
+
+	bool dmic_en;
+	unsigned int dmic1_data_pin;
+	/* 0 = GPIO6; 1 = IN2P; 3 = GPIO7*/
+	unsigned int dmic2_data_pin;
+	/* 0 = GPIO8; 1 = IN3N; */
+	unsigned int dmic3_data_pin;
+	/* 0 = GPIO9; 1 = GPIO10; 2 = GPIO5*/
+};
+
+#endif

sound/soc/codecs/Kconfig

@@ -80,6 +80,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_RT5640 if I2C
 	select SND_SOC_RT5645 if I2C
 	select SND_SOC_RT5651 if I2C
+	select SND_SOC_RT5670 if I2C
 	select SND_SOC_RT5677 if I2C
 	select SND_SOC_SGTL5000 if I2C
 	select SND_SOC_SI476X if MFD_SI476X_CORE
@@ -452,9 +453,13 @@ config SND_SOC_RL6231
 	default y if SND_SOC_RT5640=y
 	default y if SND_SOC_RT5645=y
 	default y if SND_SOC_RT5651=y
+	default y if SND_SOC_RT5670=y
+	default y if SND_SOC_RT5677=y
 	default m if SND_SOC_RT5640=m
 	default m if SND_SOC_RT5645=m
 	default m if SND_SOC_RT5651=m
+	default m if SND_SOC_RT5670=m
+	default m if SND_SOC_RT5677=m
 
 config SND_SOC_RT286
 	tristate
@@ -471,6 +476,9 @@ config SND_SOC_RT5645
 config SND_SOC_RT5651
 	tristate
 
+config SND_SOC_RT5670
+	tristate
+
 config SND_SOC_RT5677
 	tristate
 

sound/soc/codecs/Makefile

@@ -74,6 +74,7 @@ snd-soc-rt5631-objs := rt5631.o
 snd-soc-rt5640-objs := rt5640.o
 snd-soc-rt5645-objs := rt5645.o
 snd-soc-rt5651-objs := rt5651.o
+snd-soc-rt5670-objs := rt5670.o
 snd-soc-rt5677-objs := rt5677.o
 snd-soc-sgtl5000-objs := sgtl5000.o
 snd-soc-alc5623-objs := alc5623.o
@@ -243,6 +244,7 @@ obj-$(CONFIG_SND_SOC_RT5631)	+= snd-soc-rt5631.o
 obj-$(CONFIG_SND_SOC_RT5640)	+= snd-soc-rt5640.o
 obj-$(CONFIG_SND_SOC_RT5645)	+= snd-soc-rt5645.o
 obj-$(CONFIG_SND_SOC_RT5651)	+= snd-soc-rt5651.o
+obj-$(CONFIG_SND_SOC_RT5670)	+= snd-soc-rt5670.o
 obj-$(CONFIG_SND_SOC_RT5677)	+= snd-soc-rt5677.o
 obj-$(CONFIG_SND_SOC_SGTL5000)  += snd-soc-sgtl5000.o
 obj-$(CONFIG_SND_SOC_SIGMADSP)	+= snd-soc-sigmadsp.o

sound/soc/codecs/rt5670-dsp.h

+/*
+ * rt5670-dsp.h  --  RT5670 ALSA SoC DSP driver
+ *
+ * Copyright 2014 Realtek Microelectronics
+ * Author: Bard Liao <bardliao@realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __RT5670_DSP_H__
+#define __RT5670_DSP_H__
+
+#define RT5670_DSP_CTRL1		0xe0
+#define RT5670_DSP_CTRL2		0xe1
+#define RT5670_DSP_CTRL3		0xe2
+#define RT5670_DSP_CTRL4		0xe3
+#define RT5670_DSP_CTRL5		0xe4
+
+/* DSP Control 1 (0xe0) */
+#define RT5670_DSP_CMD_MASK		(0xff << 8)
+#define RT5670_DSP_CMD_PE		(0x0d << 8)	/* Patch Entry */
+#define RT5670_DSP_CMD_MW		(0x3b << 8)	/* Memory Write */
+#define RT5670_DSP_CMD_MR		(0x37 << 8)	/* Memory Read */
+#define RT5670_DSP_CMD_RR		(0x60 << 8)	/* Register Read */
+#define RT5670_DSP_CMD_RW		(0x68 << 8)	/* Register Write */
+#define RT5670_DSP_REG_DATHI		(0x26 << 8)	/* High Data Addr */
+#define RT5670_DSP_REG_DATLO		(0x25 << 8)	/* Low Data Addr */
+#define RT5670_DSP_CLK_MASK		(0x3 << 6)
+#define RT5670_DSP_CLK_SFT		6
+#define RT5670_DSP_CLK_768K		(0x0 << 6)
+#define RT5670_DSP_CLK_384K		(0x1 << 6)
+#define RT5670_DSP_CLK_192K		(0x2 << 6)
+#define RT5670_DSP_CLK_96K		(0x3 << 6)
+#define RT5670_DSP_BUSY_MASK		(0x1 << 5)
+#define RT5670_DSP_RW_MASK		(0x1 << 4)
+#define RT5670_DSP_DL_MASK		(0x3 << 2)
+#define RT5670_DSP_DL_0			(0x0 << 2)
+#define RT5670_DSP_DL_1			(0x1 << 2)
+#define RT5670_DSP_DL_2			(0x2 << 2)
+#define RT5670_DSP_DL_3			(0x3 << 2)
+#define RT5670_DSP_I2C_AL_16		(0x1 << 1)
+#define RT5670_DSP_CMD_EN		(0x1)
+
+struct rt5670_dsp_param {
+	u16 cmd_fmt;
+	u16 addr;
+	u16 data;
+	u8 cmd;
+};
+
+#endif /* __RT5670_DSP_H__ */
+

sound/soc/codecs/rt5677.h

@@ -1393,13 +1393,6 @@
 #define RT5677_DSP_IB_9_L			(0x1 << 1)
 #define RT5677_DSP_IB_9_L_SFT			1
 
-/* Debug String Length */
-#define RT5677_REG_DISP_LEN 23
-
-#define RT5677_NO_JACK		BIT(0)
-#define RT5677_HEADSET_DET	BIT(1)
-#define RT5677_HEADPHO_DET	BIT(2)
-
 /* System Clock Source */
 enum {
 	RT5677_SCLK_S_MCLK,
@@ -1425,14 +1418,6 @@ enum {
 	RT5677_AIFS,
 };
 
-struct rt5677_pll_code {
-	bool m_bp; /* Indicates bypass m code or not. */
-	bool k_bp; /* Indicates bypass k code or not. */
-	int m_code;
-	int n_code;
-	int k_code;
-};
-
 struct rt5677_priv {
 	struct snd_soc_codec *codec;
 	struct rt5677_platform_data pdata;

sound/soc/s6000/Kconfig

 config SND_S6000_SOC
 	tristate "SoC Audio for the Stretch s6000 family"
-	depends on XTENSA_VARIANT_S6000
+	depends on XTENSA_VARIANT_S6000 || COMPILE_TEST
+	depends on HAS_IOMEM
+	select SND_S6000_SOC_PCM if XTENSA_VARIANT_S6000
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  s6000 family chips. You will also need to select the platform
 	  to support below.
 
+config SND_S6000_SOC_PCM
+	tristate
+
 config SND_S6000_SOC_I2S
 	tristate
 
 config SND_S6000_SOC_S6IPCAM
-	tristate "SoC Audio support for Stretch 6105 IP Camera"
-	depends on SND_S6000_SOC && XTENSA_PLATFORM_S6105
+	bool "SoC Audio support for Stretch 6105 IP Camera"
+	depends on SND_S6000_SOC=y
+	depends on I2C=y
+	depends on XTENSA_PLATFORM_S6105 || COMPILE_TEST
 	select SND_S6000_SOC_I2S
 	select SND_SOC_TLV320AIC3X
 	help

sound/soc/s6000/Makefile

@@ -2,7 +2,7 @@
 snd-soc-s6000-objs := s6000-pcm.o
 snd-soc-s6000-i2s-objs := s6000-i2s.o
 
-obj-$(CONFIG_SND_S6000_SOC) += snd-soc-s6000.o
+obj-$(CONFIG_SND_S6000_SOC_PCM) += snd-soc-s6000.o
 obj-$(CONFIG_SND_S6000_SOC_I2S) += snd-soc-s6000-i2s.o
 
 # s6105 Machine Support

sound/soc/s6000/s6105-ipcam.c

@@ -19,8 +19,6 @@
 #include <sound/pcm.h>
 #include <sound/soc.h>
 
-#include <variant/dmac.h>
-
 #include "s6000-pcm.h"
 #include "s6000-i2s.h"
 
@@ -135,22 +133,8 @@ static const struct snd_kcontrol_new audio_out_mux = {
 /* Logic for a aic3x as connected on the s6105 ip camera ref design */
 static int s6105_aic3x_init(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_soc_codec *codec = rtd->codec;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
 	struct snd_soc_card *card = rtd->card;
 
-	/* not present */
-	snd_soc_dapm_nc_pin(dapm, "MONO_LOUT");
-	snd_soc_dapm_nc_pin(dapm, "LINE2L");
-	snd_soc_dapm_nc_pin(dapm, "LINE2R");
-
-	/* not connected */
-	snd_soc_dapm_nc_pin(dapm, "MIC3L"); /* LINE2L on this chip */
-	snd_soc_dapm_nc_pin(dapm, "MIC3R"); /* LINE2R on this chip */
-	snd_soc_dapm_nc_pin(dapm, "LLOUT");
-	snd_soc_dapm_nc_pin(dapm, "RLOUT");
-	snd_soc_dapm_nc_pin(dapm, "HPRCOM");
-
 	/* must correspond to audio_out_mux.private_value initializer */
 	snd_soc_dapm_disable_pin(&card->dapm, "Audio Out Differential");
 
@@ -182,6 +166,7 @@ static struct snd_soc_card snd_soc_card_s6105 = {
 	.num_dapm_widgets = ARRAY_SIZE(aic3x_dapm_widgets),
 	.dapm_routes = audio_map,
 	.num_dapm_routes = ARRAY_SIZE(audio_map),
+	.fully_routed = true,
 };
 
 static struct s6000_snd_platform_data s6105_snd_data __initdata = {

sound/soc/samsung/Makefile

 # S3c24XX Platform Support
 snd-soc-s3c-dma-objs := dmaengine.o
-snd-soc-s3c-dma-legacy-objs := dma.o
 snd-soc-idma-objs := idma.o
 snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
 snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
@@ -10,8 +9,7 @@ snd-soc-samsung-spdif-objs := spdif.o
 snd-soc-pcm-objs := pcm.o
 snd-soc-i2s-objs := i2s.o
 
-obj-$(CONFIG_SND_S3C_DMA) += snd-soc-s3c-dma.o
-obj-$(CONFIG_SND_S3C_DMA_LEGACY) += snd-soc-s3c-dma-legacy.o
+obj-$(CONFIG_SND_SOC_SAMSUNG) += snd-soc-s3c-dma.o
 obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
 obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o
 obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
@@ -46,6 +44,7 @@ snd-soc-tobermory-objs := tobermory.o
 snd-soc-lowland-objs := lowland.o
 snd-soc-littlemill-objs := littlemill.o
 snd-soc-bells-objs := bells.o
+snd-soc-odroidx2-max98090-objs := odroidx2_max98090.o
 
 obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -71,3 +70,4 @@ obj-$(CONFIG_SND_SOC_TOBERMORY) += snd-soc-tobermory.o
 obj-$(CONFIG_SND_SOC_LOWLAND) += snd-soc-lowland.o
 obj-$(CONFIG_SND_SOC_LITTLEMILL) += snd-soc-littlemill.o
 obj-$(CONFIG_SND_SOC_BELLS) += snd-soc-bells.o
+obj-$(CONFIG_SND_SOC_ODROIDX2) += snd-soc-odroidx2-max98090.o

sound/soc/samsung/dma.h

@@ -14,17 +14,10 @@
 
 #include <sound/dmaengine_pcm.h>
 
-struct s3c_dma_client {
-	char *name;
-};
-
 struct s3c_dma_params {
-	struct s3c_dma_client *client;	/* stream identifier */
 	int channel;				/* Channel ID */
 	dma_addr_t dma_addr;
 	int dma_size;			/* Size of the DMA transfer */
-	unsigned ch;
-	struct samsung_dma_ops *ops;
 	char *ch_name;
 	struct snd_dmaengine_dai_dma_data dma_data;
 };