Commit c1fa7560 authored by Alex Williamson's avatar Alex Williamson Committed by Luis Henriques

PCI: Mark Atheros AR93xx to avoid bus reset

commit c3e59ee4 upstream.

Reports against the TL-WDN4800 card indicate that PCI bus reset of this
Atheros device cause system lock-ups and resets.  I've also been able to
confirm this behavior on multiple systems.  The device never returns from
reset and attempts to access config space of the device after reset result
in hangs.  Blacklist bus reset for the device to avoid this issue.

[bhelgaas: This regression appeared in v3.14.  Andreas bisected it to
425c1b22 ("PCI: Add Virtual Channel to save/restore support"), but we
don't understand the mechanism by which that commit affects the reset
path.]

[bhelgaas: changelog, references]
Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.orgReported-by: default avatarAndreas Hartmann <andihartmann@freenet.de>
Tested-by: default avatarAndreas Hartmann <andihartmann@freenet.de>
Signed-off-by: default avatarAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
parent e29b2f34
......@@ -3006,6 +3006,20 @@ DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_REALTEK, 0x8169,
quirk_broken_intx_masking);
static void quirk_no_bus_reset(struct pci_dev *dev)
{
dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET;
}
/*
* Atheros AR93xx chips do not behave after a bus reset. The device will
* throw a Link Down error on AER-capable systems and regardless of AER,
* config space of the device is never accessible again and typically
* causes the system to hang or reset when access is attempted.
* http://www.spinics.net/lists/linux-pci/msg34797.html
*/
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset);
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment