Commit c1fb79e2 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes / quirks from Greg KH:
 "Here are some USB and PHY fixes and quirks for 3.17-rc6.  Nothing
  major, just a few things that have been reported"

* tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
  USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
  USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
  USB: EHCI: unlink QHs even after the controller has stopped
  phy: spear1340-miphy: fix driver dependencies
  phy: spear1310-miphy: fix driver dependencies
  phy: miphy365x: Fix off-by-one error
parents 0d951433 c80b4495
......@@ -214,12 +214,14 @@ config PHY_QCOM_IPQ806X_SATA
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
depends on MACH_SPEAR1310 || COMPILE_TEST
help
Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
config PHY_ST_SPEAR1340_MIPHY
tristate "ST SPEAR1340-MIPHY driver"
select GENERIC_PHY
depends on MACH_SPEAR1340 || COMPILE_TEST
help
Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
......
......@@ -163,6 +163,7 @@ enum miphy_sata_gen {
};
static u8 rx_tx_spd[] = {
0, /* GEN0 doesn't exist. */
TX_SPDSEL_GEN1_VAL | RX_SPDSEL_GEN1_VAL,
TX_SPDSEL_GEN2_VAL | RX_SPDSEL_GEN2_VAL,
TX_SPDSEL_GEN3_VAL | RX_SPDSEL_GEN3_VAL
......
......@@ -965,8 +965,6 @@ ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
}
qh->exception = 1;
if (ehci->rh_state < EHCI_RH_RUNNING)
qh->qh_state = QH_STATE_IDLE;
switch (qh->qh_state) {
case QH_STATE_LINKED:
WARN_ON(!list_empty(&qh->qtd_list));
......
......@@ -101,6 +101,12 @@ UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
"PhotoSmart R707",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999,
"Adaptec",
"USBConnect 2000",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
* and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
* for USB floppies that need the SINGLE_LUN enforcement.
......@@ -1125,6 +1131,18 @@ UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE),
UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133,
"Xircom",
"PortGear USB-SCSI (Mac USB Dock)",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133,
"Xircom",
"PortGear USB to SCSI Converter",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
......@@ -1964,6 +1982,14 @@ UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
* and Mac USB Dock USB-SCSI */
UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133,
"Entrega Technologies",
"USB to SCSI Converter",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* Reported by Robert Schedel <r.schedel@yahoo.de>
* Note: this is a 'super top' device like the above 14cd/6600 device */
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
......@@ -1986,6 +2012,12 @@ UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999,
"Ariston Technologies",
"iConnect USB to SCSI adapter",
USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
/* Reported by Hans de Goede <hdegoede@redhat.com>
* These Appotech controllers are found in Picture Frames, they provide a
* (buggy) emulation of a cdrom drive which contains the windows software
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment