extcon: max77693: Fix cable name of JIG_UART_ON

When JIG was set to "boot on" mode, the UART connection did not work
because it was assigned to Dock-Car cable (path: audio), not JIG-UART-ON
cable.

This was introduced in 39bf369e ("extcon: max77693: Add support dock
device and buttons") while adding dock features.

Assign the JIG-UART-ON back to UART path.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[cw00.choi: Modify the patch name to remove specific board name]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

drivers/extcon/extcon-max77693.c

@@ -232,7 +232,7 @@ static const char *max77693_extcon_cable[] = {
 	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
 	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
 	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_UART_ON]		= "Dock-Car",
+	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
 	[EXTCON_CABLE_DOCK_SMART]		= "Dock-Smart",
 	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
 	[EXTCON_CABLE_DOCK_AUDIO]		= "Dock-Audio",
@@ -532,9 +532,6 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		extcon_set_cable_state(info->edev, "Dock-Smart", attached);
 		extcon_set_cable_state(info->edev, "MHL", attached);
 		goto out;
-	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* Dock-Car */
-		strcpy(dock_name, "Dock-Car");
-		break;
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
 		strcpy(dock_name, "Dock-Desk");
 		break;
@@ -669,6 +666,11 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 		strcpy(cable_name, "JIG-UART-OFF");
 		path = CONTROL1_SW_UART;
 		break;
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
+		/* PATH:AP_UART */
+		strcpy(cable_name, "JIG-UART-ON");
+		path = CONTROL1_SW_UART;
+		break;
 	default:
 		dev_err(info->dev, "failed to detect %s jig cable\n",
 			attached ? "attached" : "detached");
@@ -708,13 +710,13 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info)
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:
 		/* JIG */
 		ret = max77693_muic_jig_handler(info, cable_type, attached);
 		if (ret < 0)
 			return ret;
 		break;
 	case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
-	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* Dock-Car */
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
 	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
 		/*