Commit c2239a25 authored by farah kassabri's avatar farah kassabri Committed by Oded Gabbay

habanalabs: pass-through request from user to f/w

Add a uAPI, as part of the INFO IOCTL, to allow users to send
requests directly to f/w, according to a pre-defined set of opcodes
that the f/w exposes.

The f/w will put the result in a kernel-allocated buffer, which the
driver will then copy to the user-supplied buffer.

This will allow f/w tools to communicate directly with the f/w
without the need to add a new uAPI to the driver for each new type
of request.
Signed-off-by: default avatarfarah kassabri <fkassabri@habana.ai>
Reviewed-by: default avatarOded Gabbay <ogabbay@kernel.org>
Signed-off-by: default avatarOded Gabbay <ogabbay@kernel.org>
parent 2dd89591
......@@ -3145,3 +3145,27 @@ int hl_fw_get_sec_attest_info(struct hl_device *hdev, struct cpucp_sec_attest_in
sizeof(struct cpucp_sec_attest_info), nonce,
HL_CPUCP_SEC_ATTEST_INFO_TINEOUT_USEC);
}
int hl_fw_send_generic_request(struct hl_device *hdev, enum hl_passthrough_type sub_opcode,
dma_addr_t buff, u32 *size)
{
struct cpucp_packet pkt = {0};
u64 result;
int rc = 0;
pkt.ctl = cpu_to_le32(CPUCP_PACKET_GENERIC_PASSTHROUGH << CPUCP_PKT_CTL_OPCODE_SHIFT);
pkt.addr = cpu_to_le64(buff);
pkt.data_max_size = cpu_to_le32(*size);
pkt.pkt_subidx = cpu_to_le32(sub_opcode);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *)&pkt, sizeof(pkt),
HL_CPUCP_INFO_TIMEOUT_USEC, &result);
if (rc)
dev_err(hdev->dev, "failed to send CPUCP data of generic fw pkt\n");
else
dev_dbg(hdev->dev, "generic pkt was successful, result: 0x%llx\n", result);
*size = (u32)result;
return rc;
}
......@@ -3790,6 +3790,8 @@ int hl_fw_get_clk_rate(struct hl_device *hdev, u32 *cur_clk, u32 *max_clk);
void hl_fw_set_pll_profile(struct hl_device *hdev);
void hl_sysfs_add_dev_clk_attr(struct hl_device *hdev, struct attribute_group *dev_clk_attr_grp);
void hl_sysfs_add_dev_vrm_attr(struct hl_device *hdev, struct attribute_group *dev_vrm_attr_grp);
int hl_fw_send_generic_request(struct hl_device *hdev, enum hl_passthrough_type sub_opcode,
dma_addr_t buff, u32 *size);
void hw_sob_get(struct hl_hw_sob *hw_sob);
void hw_sob_put(struct hl_hw_sob *hw_sob);
......
......@@ -820,6 +820,54 @@ static int user_mappings_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
? -EFAULT : 0;
}
static int send_fw_generic_request(struct hl_device *hdev, struct hl_info_args *info_args)
{
void __user *buff = (void __user *) (uintptr_t) info_args->return_pointer;
u32 size = info_args->return_size;
dma_addr_t dma_handle;
bool need_input_buff;
void *fw_buff;
int rc = 0;
switch (info_args->fw_sub_opcode) {
case HL_PASSTHROUGH_VERSIONS:
need_input_buff = false;
break;
default:
return -EINVAL;
}
if (size > SZ_1M) {
dev_err(hdev->dev, "buffer size cannot exceed 1MB\n");
return -EINVAL;
}
fw_buff = hl_cpu_accessible_dma_pool_alloc(hdev, size, &dma_handle);
if (!fw_buff)
return -ENOMEM;
if (need_input_buff && copy_from_user(fw_buff, buff, size)) {
dev_dbg(hdev->dev, "Failed to copy from user FW buff\n");
rc = -EFAULT;
goto free_buff;
}
rc = hl_fw_send_generic_request(hdev, info_args->fw_sub_opcode, dma_handle, &size);
if (rc)
goto free_buff;
if (copy_to_user(buff, fw_buff, min(size, info_args->return_size))) {
dev_dbg(hdev->dev, "Failed to copy to user FW generic req output\n");
rc = -EFAULT;
}
free_buff:
hl_cpu_accessible_dma_pool_free(hdev, info_args->return_size, fw_buff);
return rc;
}
static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
struct device *dev)
{
......@@ -947,6 +995,9 @@ static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
case HL_INFO_ENGINE_STATUS:
return engine_status_info(hpriv, args);
case HL_INFO_FW_GENERIC_REQ:
return send_fw_generic_request(hdev, args);
default:
dev_err(dev, "Invalid request %d\n", args->op);
rc = -EINVAL;
......
......@@ -643,6 +643,10 @@ enum pq_init_status {
* data corruption in case of mismatched driver/FW versions.
* Relevant only to Gaudi.
*
* * CPUCP_PACKET_GENERIC_PASSTHROUGH -
* Generic opcode for all firmware info that is only passed to host
* through the LKD, without getting parsed there.
*
* CPUCP_PACKET_ACTIVE_STATUS_SET -
* LKD sends FW indication whether device is free or in use, this indication is reported
* also to the BMC.
......@@ -704,9 +708,12 @@ enum cpucp_packet_id {
CPUCP_PACKET_RESERVED5, /* not used */
CPUCP_PACKET_RESERVED6, /* not used */
CPUCP_PACKET_RESERVED7, /* not used */
CPUCP_PACKET_GENERIC_PASSTHROUGH, /* IOCTL */
CPUCP_PACKET_RESERVED8, /* not used */
CPUCP_PACKET_RESERVED9, /* not used */
CPUCP_PACKET_ACTIVE_STATUS_SET, /* internal */
CPUCP_PACKET_RESERVED9, /* not used */
CPUCP_PACKET_RESERVED10, /* not used */
CPUCP_PACKET_RESERVED11, /* not used */
CPUCP_PACKET_ID_MAX /* must be last */
};
......@@ -805,8 +812,13 @@ struct cpucp_packet {
__le32 nonce;
};
/* For NIC requests */
__le32 port_index;
union {
/* For NIC requests */
__le32 port_index;
/* For Generic packet sub index */
__le32 pkt_subidx;
};
};
struct cpucp_unmask_irq_arr_packet {
......@@ -976,6 +988,11 @@ enum pll_index {
IC_PLL = 16,
MC_PLL = 17,
EMMC_PLL = 18,
D2D_PLL = 19,
CS_PLL = 20,
C2C_PLL = 21,
NCH_PLL = 22,
C2M_PLL = 23,
PLL_MAX
};
......@@ -1135,8 +1152,9 @@ enum cpucp_serdes_type {
HLS1_SERDES_TYPE,
HLS1H_SERDES_TYPE,
HLS2_SERDES_TYPE,
UNKNOWN_SERDES_TYPE,
MAX_NUM_SERDES_TYPE = UNKNOWN_SERDES_TYPE
HLS2_TYPE_1_SERDES_TYPE,
MAX_NUM_SERDES_TYPE, /* number of types */
UNKNOWN_SERDES_TYPE = 0xFFFF /* serdes_type is u16 */
};
struct cpucp_nic_info {
......@@ -1160,6 +1178,21 @@ struct page_discard_info {
__le32 mmu_page_idx[PAGE_DISCARD_MAX];
};
/*
* struct frac_val - fracture value represented by "integer.frac".
* @integer: the integer part of the fracture value;
* @frac: the fracture part of the fracture value.
*/
struct frac_val {
union {
struct {
__le16 integer;
__le16 frac;
};
__le32 val;
};
};
/*
* struct ser_val - the SER (symbol error rate) value is represented by "integer * 10 ^ -exp".
* @integer: the integer part of the SER value;
......@@ -1183,8 +1216,12 @@ struct ser_val {
* @pcs_link: has PCS link.
* @phy_ready: is PHY ready.
* @auto_neg: is Autoneg enabled.
* @timeout_retransmission_cnt: timeout retransmission events
* @high_ber_cnt: high ber events
* @timeout_retransmission_cnt: timeout retransmission events.
* @high_ber_cnt: high ber events.
* @pre_fec_ser: pre FEC SER value.
* @post_fec_ser: post FEC SER value.
* @throughput: measured throughput.
* @latency: measured latency.
*/
struct cpucp_nic_status {
__le32 port;
......@@ -1200,6 +1237,10 @@ struct cpucp_nic_status {
__u8 auto_neg;
__le32 timeout_retransmission_cnt;
__le32 high_ber_cnt;
struct ser_val pre_fec_ser;
struct ser_val post_fec_ser;
struct frac_val bandwidth;
struct frac_val lat;
};
enum cpucp_hbm_row_replace_cause {
......@@ -1317,4 +1358,14 @@ struct cpucp_monitor_dump {
struct dcore_monitor_regs_data sync_mngr_e_n;
};
/*
* The Type of the generic request (and other input arguments) will be fetched from user by reading
* from "pkt_subidx" field in struct cpucp_packet.
*
* HL_PASSTHROUGHT_VERSIONS - Fetch all firmware versions.
*/
enum hl_passthrough_type {
HL_PASSTHROUGH_VERSIONS,
};
#endif /* CPUCP_IF_H */
......@@ -789,6 +789,7 @@ enum hl_server_type {
* HL_INFO_ENGINE_STATUS - Retrieve the status of all the h/w engines in the asic.
* HL_INFO_PAGE_FAULT_EVENT - Retrieve parameters of captured page fault.
* HL_INFO_USER_MAPPINGS - Retrieve user mappings, captured after page fault event.
* HL_INFO_FW_GENERIC_REQ - Send generic request to FW.
*/
#define HL_INFO_HW_IP_INFO 0
#define HL_INFO_HW_EVENTS 1
......@@ -822,6 +823,7 @@ enum hl_server_type {
#define HL_INFO_ENGINE_STATUS 32
#define HL_INFO_PAGE_FAULT_EVENT 33
#define HL_INFO_USER_MAPPINGS 34
#define HL_INFO_FW_GENERIC_REQ 35
#define HL_INFO_VERSION_MAX_LEN 128
#define HL_INFO_CARD_NAME_MAX_LEN 16
......@@ -1258,6 +1260,7 @@ enum gaudi_dcores {
* @sec_attest_nonce: Nonce number used for attestation report.
* @array_size: Number of array members copied to user buffer.
* Relevant for HL_INFO_USER_MAPPINGS info ioctl.
* @fw_sub_opcode: generic requests sub opcodes.
* @pad: Padding to 64 bit.
*/
struct hl_info_args {
......@@ -1274,6 +1277,7 @@ struct hl_info_args {
__u32 user_buffer_actual_size;
__u32 sec_attest_nonce;
__u32 array_size;
__u32 fw_sub_opcode;
};
__u32 pad;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment