Commit c23eb89e authored by Richard Zhao's avatar Richard Zhao Committed by Sascha Hauer

ARM: imx3x: clean up ARCH_MX3X

Move to SOC_SOC_IMX3X.
Leave ARCH_MX31/35 definitions there, in case some place prevent multi-soc
single image.
Signed-off-by: default avatarRichard Zhao <richard.zhao@freescale.com>
Acked-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent 76851671
......@@ -811,7 +811,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
default y
......
......@@ -94,7 +94,7 @@ static struct sdma_script_start_addrs addr_imx25_to1 = {
};
#endif
#ifdef CONFIG_ARCH_MX31
#ifdef CONFIG_SOC_IMX31
static struct sdma_script_start_addrs addr_imx31_to1 = {
.per_2_per_addr = 1677,
};
......@@ -106,7 +106,7 @@ static struct sdma_script_start_addrs addr_imx31_to2 = {
};
#endif
#ifdef CONFIG_ARCH_MX35
#ifdef CONFIG_SOC_IMX35
static struct sdma_script_start_addrs addr_imx35_to1 = {
.ap_2_ap_addr = 642,
.uart_2_mcu_addr = 817,
......
......@@ -103,7 +103,7 @@ extern unsigned int __mxc_cpu_type;
# define cpu_is_mx27() (0)
#endif
#ifdef CONFIG_ARCH_MX31
#ifdef CONFIG_SOC_IMX31
# ifdef mxc_cpu_type
# undef mxc_cpu_type
# define mxc_cpu_type __mxc_cpu_type
......@@ -115,7 +115,7 @@ extern unsigned int __mxc_cpu_type;
# define cpu_is_mx31() (0)
#endif
#ifdef CONFIG_ARCH_MX35
#ifdef CONFIG_SOC_IMX35
# ifdef mxc_cpu_type
# undef mxc_cpu_type
# define mxc_cpu_type __mxc_cpu_type
......
......@@ -1944,7 +1944,7 @@ config 68360_ENET
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28
IMX_HAVE_PLATFORM_FEC || SOC_IMX28
select PHYLIB
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
......
......@@ -161,10 +161,10 @@ config SPI_IMX_VER_0_0
def_bool y if SOC_IMX21 || SOC_IMX27
config SPI_IMX_VER_0_4
def_bool y if ARCH_MX31
def_bool y if SOC_MX31
config SPI_IMX_VER_0_7
def_bool y if ARCH_MX25 || ARCH_MX35 || SOC_IMX51 || SOC_IMX53
def_bool y if ARCH_MX25 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
config SPI_IMX_VER_2_3
def_bool y if SOC_IMX51 || SOC_IMX53
......
......@@ -88,7 +88,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
void fsl_udc_clk_finalize(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
#if defined(CONFIG_ARCH_MX35)
#if defined(CONFIG_SOC_IMX35)
unsigned int v;
/* workaround ENGcm09152 for i.MX35 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment