regulator: pwm: Fix regulator ramp delay for continuous mode

The original commit adding support for continuous voltage mode didn't
handle the regulator ramp delay properly.  It treated the delay as a
fixed delay in uS despite the property being defined as uV / uS.  Let's
adjust it.  Luckily there appear to be no users of this ramp delay for
PWM regulators (as per grepping through device trees in linuxnext).

Note also that the upper bound of usleep_range probably shouldn't be a
full 1 ms longer than the lower bound since I've seen plenty of hardware
with a ramp rate of ~5000 uS / uV and for small jumps the total delays
are in the tens of uS.  1000 is way too much.  We'll try to be dynamic
and use 10%.

NOTE: This commit doesn't add support for regulator-enable-ramp-delay.
That could be done in a future patch when someone has a user of that
featre.

Though this patch is shows as "fixing" a bug, there are no actual known
users of continuous mode PWM regulator w/ ramp delay in mainline and so
this likely won't have any effect on anyone unless they are working
out-of-tree with private patches.  For anyone in this state, it is
highly encouraged to also pick Boris Brezillon's WIP patches to get
yourself a reliable and glitch-free regulator.

Fixes: 4773be18 ("regulator: pwm-regulator: Add support for continuous-voltage")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/pwm-regulator.c

@@ -145,6 +145,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 	unsigned int duty_pulse;
 	u64 req_period;
 	u32 rem;
+	int old_uV = pwm_regulator_get_voltage(rdev);
 	int ret;
 
 	pwm_get_args(drvdata->pwm, &pargs);
@@ -174,8 +175,12 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 
 	drvdata->volt_uV = min_uV;
 
-	/* Delay required by PWM regulator to settle to the new voltage */
-	usleep_range(ramp_delay, ramp_delay + 1000);
+	if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev))
+		return 0;
+
+	/* Ramp delay is in uV/uS. Adjust to uS and delay */
+	ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay);
+	usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
 
 	return 0;
 }