Commit c2fb8a3f authored by Alan Stern's avatar Alan Stern Committed by Greg Kroah-Hartman

USB: add NO_D3_DURING_SLEEP flag and revert 151b6128

This patch (as1558) fixes a problem affecting several ASUS computers:
The machine crashes or corrupts memory when going into suspend if the
ehci-hcd driver is bound to any controllers.  Users have been forced
to unbind or unload ehci-hcd before putting their systems to sleep.

After extensive testing, it was determined that the machines don't
like going into suspend when any EHCI controllers are in the PCI D3
power state.  Presumably this is a firmware bug, but there's nothing
we can do about it except to avoid putting the controllers in D3
during system sleep.

The patch adds a new flag to indicate whether the problem is present,
and avoids changing the controller's power state if the flag is set.
Runtime suspend is unaffected; this matters only for system suspend.
However as a side effect, the controller will not respond to remote
wakeup requests while the system is asleep.  Hence USB wakeup is not
functional -- but of course, this is already true in the current state
of affairs.

A similar patch has already been applied as commit
151b6128 (USB: EHCI: fix crash during
suspend on ASUS computers).  The patch supersedes that one and reverts
it.  There are two differences:

	The old patch added the flag at the USB level; this patch
	adds it at the PCI level.

	The old patch applied to all chipsets with the same vendor,
	subsystem vendor, and product IDs; this patch makes an
	exception for a known-good system (based on DMI information).
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Tested-by: default avatarDâniel Fraga <fragabr@gmail.com>
Tested-by: default avatarAndrey Rahmatullin <wrar@wrar.name>
Tested-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 0ef0be15
...@@ -1744,6 +1744,11 @@ int pci_prepare_to_sleep(struct pci_dev *dev) ...@@ -1744,6 +1744,11 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
if (target_state == PCI_POWER_ERROR) if (target_state == PCI_POWER_ERROR)
return -EIO; return -EIO;
/* Some devices mustn't be in D3 during system sleep */
if (target_state == PCI_D3hot &&
(dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
return 0;
pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev)); pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state); error = pci_set_power_state(dev, target_state);
......
...@@ -2929,6 +2929,32 @@ static void __devinit disable_igfx_irq(struct pci_dev *dev) ...@@ -2929,6 +2929,32 @@ static void __devinit disable_igfx_irq(struct pci_dev *dev)
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
/*
* The Intel 6 Series/C200 Series chipset's EHCI controllers on many
* ASUS motherboards will cause memory corruption or a system crash
* if they are in D3 while the system is put into S3 sleep.
*/
static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
{
const char *sys_info;
static const char good_Asus_board[] = "P8Z68-V";
if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
return;
if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
return;
sys_info = dmi_get_system_info(DMI_BOARD_NAME);
if (sys_info && memcmp(sys_info, good_Asus_board,
sizeof(good_Asus_board) - 1) == 0)
return;
dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
device_set_wakeup_capable(&dev->dev, false);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end) struct pci_fixup *end)
{ {
......
...@@ -493,15 +493,6 @@ static int hcd_pci_suspend_noirq(struct device *dev) ...@@ -493,15 +493,6 @@ static int hcd_pci_suspend_noirq(struct device *dev)
pci_save_state(pci_dev); pci_save_state(pci_dev);
/*
* Some systems crash if an EHCI controller is in D3 during
* a sleep transition. We have to leave such controllers in D0.
*/
if (hcd->broken_pci_sleep) {
dev_dbg(dev, "Staying in PCI D0\n");
return retval;
}
/* If the root hub is dead rather than suspended, disallow remote /* If the root hub is dead rather than suspended, disallow remote
* wakeup. usb_hc_died() should ensure that both hosts are marked as * wakeup. usb_hc_died() should ensure that both hosts are marked as
* dying, so we only need to check the primary roothub. * dying, so we only need to check the primary roothub.
......
...@@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ...@@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
hcd->has_tt = 1; hcd->has_tt = 1;
tdi_reset(ehci); tdi_reset(ehci);
} }
if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
hcd->broken_pci_sleep = 1;
device_set_wakeup_capable(&pdev->dev, false);
}
}
break; break;
case PCI_VENDOR_ID_TDI: case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
......
...@@ -176,6 +176,8 @@ enum pci_dev_flags { ...@@ -176,6 +176,8 @@ enum pci_dev_flags {
PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2, PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
/* Provide indication device is assigned by a Virtual Machine Manager */ /* Provide indication device is assigned by a Virtual Machine Manager */
PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4, PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
/* Device causes system crash if in D3 during S3 sleep */
PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
}; };
enum pci_irq_reroute_variant { enum pci_irq_reroute_variant {
......
...@@ -126,8 +126,6 @@ struct usb_hcd { ...@@ -126,8 +126,6 @@ struct usb_hcd {
unsigned wireless:1; /* Wireless USB HCD */ unsigned wireless:1; /* Wireless USB HCD */
unsigned authorized_default:1; unsigned authorized_default:1;
unsigned has_tt:1; /* Integrated TT in root hub */ unsigned has_tt:1; /* Integrated TT in root hub */
unsigned broken_pci_sleep:1; /* Don't put the
controller in PCI-D3 for system sleep */
unsigned int irq; /* irq allocated */ unsigned int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */ void __iomem *regs; /* device memory/io */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment