ARM: ux500: Remove TC35892 Flexible IO Expander when booting ATAGs

It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -71,12 +71,6 @@ static void sdi0_configure(struct device *parent)
 	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
 }
 
-void mop500_sdi_tc35892_init(struct device *parent)
-{
-	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
-	sdi0_configure(parent);
-}
-
 /*
  * SDI1 (SDIO WLAN)
  */
@@ -185,12 +179,6 @@ void __init mop500_sdi_init(struct device *parent)
 	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
 	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-
-	/*
-	 * On boards with the TC35892 GPIO expander, sdi0 will finally
-	 * be added when the TC35892 initializes and calls
-	 * mop500_sdi_tc35892_init() above.
-	 */
 }
 
 void __init snowball_sdi_init(struct device *parent)

arch/arm/mach-ux500/board-mop500-u8500uib.c

@@ -9,8 +9,6 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/input/matrix_keypad.h>
 
 #include "irqs.h"
 
@@ -23,70 +21,8 @@ static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = {
 	},
 };
 
-/*
- * TC35893
- */
-static const unsigned int u8500_keymap[] = {
-	KEY(3, 1, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(6, 4, KEY_VOLUMEDOWN),
-	KEY(4, 2, KEY_EMAIL),
-	KEY(3, 3, KEY_RIGHT),
-	KEY(2, 5, KEY_BACKSPACE),
-
-	KEY(6, 7, KEY_MENU),
-	KEY(5, 0, KEY_ENTER),
-	KEY(4, 3, KEY_0),
-	KEY(3, 4, KEY_DOT),
-	KEY(5, 2, KEY_UP),
-	KEY(3, 5, KEY_DOWN),
-
-	KEY(4, 5, KEY_SEND),
-	KEY(0, 5, KEY_BACK),
-	KEY(6, 2, KEY_VOLUMEUP),
-	KEY(1, 3, KEY_SPACE),
-	KEY(7, 6, KEY_LEFT),
-	KEY(5, 5, KEY_SEARCH),
-};
-
-static struct matrix_keymap_data u8500_keymap_data = {
-	.keymap		= u8500_keymap,
-	.keymap_size    = ARRAY_SIZE(u8500_keymap),
-};
-
-static struct tc3589x_keypad_platform_data tc35893_data = {
-	.krow = TC_KPD_ROWS,
-	.kcol = TC_KPD_COLUMNS,
-	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
-	.settle_time = TC_KPD_SETTLE_TIME,
-	.irqtype = IRQF_TRIGGER_FALLING,
-	.enable_wakeup = true,
-	.keymap_data    = &u8500_keymap_data,
-	.no_autorepeat  = true,
-};
-
-static struct tc3589x_platform_data tc3589x_keypad_data = {
-	.block = TC3589x_BLOCK_KEYPAD,
-	.keypad = &tc35893_data,
-	.irq_base = MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x44),
-		.platform_data = &tc3589x_keypad_data,
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-
 void __init mop500_u8500uib_init(void)
 {
 	mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500,
 			ARRAY_SIZE(mop500_i2c3_devices_u8500));
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500,
-			ARRAY_SIZE(mop500_i2c0_devices_u8500));
-
 }

arch/arm/mach-ux500/board-mop500.c

@@ -26,7 +26,6 @@
 #include <linux/regulator/ab8500.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/driver.h>
-#include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
 #include <linux/mfd/abx500/ab8500-gpio.h>
 #include <linux/platform_data/leds-lp55xx.h>
@@ -55,40 +54,6 @@ struct ab8500_platform_data ab8500_platdata = {
 	.regulator	= &ab8500_regulator_plat_data,
 };
 
-/*
- * TC35892
- */
-
-static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
-{
-	struct device *parent = NULL;
-#if 0
-	/* FIXME: Is the sdi actually part of tc3589x? */
-	parent = tc3589x->dev;
-#endif
-	mop500_sdi_tc35892_init(parent);
-}
-
-static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
-	.gpio_base	= MOP500_EGPIO(0),
-	.setup		= mop500_tc35892_init,
-};
-
-static struct tc3589x_platform_data mop500_tc35892_data = {
-	.block		= TC3589x_BLOCK_GPIO,
-	.gpio		= &mop500_tc35892_gpio_data,
-	.irq_base	= MOP500_EGPIO_IRQ_BASE,
-};
-
-/* I2C0 devices only available on the first HREF/MOP500 */
-static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x42),
-		.irq		= NOMADIK_GPIO_TO_IRQ(217),
-		.platform_data  = &mop500_tc35892_data,
-	},
-};
-
 static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	{
 		/* Light sensor Rohm BH1780GLI */

arch/arm/mach-ux500/board-mop500.h

@@ -98,7 +98,6 @@ extern struct stedma40_platform_data dma40_plat_data;
 extern void mop500_sdi_init(struct device *parent);
 extern void snowball_sdi_init(struct device *parent);
 extern void hrefv60_sdi_init(struct device *parent);
-extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pinmaps_init(void);