Commit c356bdb4 authored by Shawn Guo's avatar Shawn Guo

ARM: imx6: move v7_cpu_resume() into suspend-imx6.S

The suspend-imx6.S is introduced recently for suspend low-level assembly
code.  Since function v7_cpu_resume() is only used by suspend support,
it makes sense to move the function into suspend-imx6.S, and control the
build of the file with CONFIG_SUSPEND option.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 7ea653ef
...@@ -103,9 +103,10 @@ obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ...@@ -103,9 +103,10 @@ obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o suspend-imx6.o obj-$(CONFIG_SUSPEND) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
# i.MX6SL reuses i.MX6Q code # i.MX6SL reuses i.MX6Q code
obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o suspend-imx6.o obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
# i.MX5 based machines # i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
......
...@@ -116,7 +116,6 @@ void imx_enable_cpu(int cpu, bool enable); ...@@ -116,7 +116,6 @@ void imx_enable_cpu(int cpu, bool enable);
void imx_set_cpu_jump(int cpu, void *jump_addr); void imx_set_cpu_jump(int cpu, void *jump_addr);
u32 imx_get_cpu_arg(int cpu); u32 imx_get_cpu_arg(int cpu);
void imx_set_cpu_arg(int cpu, u32 arg); void imx_set_cpu_arg(int cpu, u32 arg);
void v7_cpu_resume(void);
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
void v7_secondary_startup(void); void v7_secondary_startup(void);
void imx_scu_map_io(void); void imx_scu_map_io(void);
...@@ -145,7 +144,14 @@ void imx6sl_set_wait_clk(bool enter); ...@@ -145,7 +144,14 @@ void imx6sl_set_wait_clk(bool enter);
void imx_cpu_die(unsigned int cpu); void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu); int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_SUSPEND
void v7_cpu_resume(void);
void imx6_suspend(void __iomem *ocram_vbase); void imx6_suspend(void __iomem *ocram_vbase);
#else
static inline void v7_cpu_resume(void) {}
static inline void imx6_suspend(void __iomem *ocram_vbase) {}
#endif
void imx6q_pm_init(void); void imx6q_pm_init(void);
void imx6dl_pm_init(void); void imx6dl_pm_init(void);
void imx6sl_pm_init(void); void imx6sl_pm_init(void);
......
...@@ -12,8 +12,6 @@ ...@@ -12,8 +12,6 @@
#include <linux/linkage.h> #include <linux/linkage.h>
#include <linux/init.h> #include <linux/init.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
.section ".text.head", "ax" .section ".text.head", "ax"
...@@ -35,37 +33,3 @@ ENTRY(v7_secondary_startup) ...@@ -35,37 +33,3 @@ ENTRY(v7_secondary_startup)
b secondary_startup b secondary_startup
ENDPROC(v7_secondary_startup) ENDPROC(v7_secondary_startup)
#endif #endif
#ifdef CONFIG_ARM_CPU_SUSPEND
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
adr r0, l2x0_saved_regs_offset
ldr r2, [r0]
add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
mov r1, #0x1
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
l2x0_saved_regs_offset:
.word l2x0_saved_regs - .
#else
.macro pl310_resume
.endm
#endif
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
pl310_resume
b cpu_resume
ENDPROC(v7_cpu_resume)
#endif
...@@ -10,6 +10,7 @@ ...@@ -10,6 +10,7 @@
*/ */
#include <linux/linkage.h> #include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h> #include <asm/hardware/cache-l2x0.h>
#include "hardware.h" #include "hardware.h"
...@@ -326,3 +327,35 @@ resume: ...@@ -326,3 +327,35 @@ resume:
mov pc, lr mov pc, lr
ENDPROC(imx6_suspend) ENDPROC(imx6_suspend)
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
adr r0, l2x0_saved_regs_offset
ldr r2, [r0]
add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
mov r1, #0x1
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
l2x0_saved_regs_offset:
.word l2x0_saved_regs - .
#else
.macro pl310_resume
.endm
#endif
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
pl310_resume
b cpu_resume
ENDPROC(v7_cpu_resume)
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment