Merge tag 'omap-for-v5.16/dt-signed' of...

Merge tag 'omap-for-v5.16/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for v5.16

These changes configure devices for am335x and dra7, and fixes
various devicetree check warnings for gta04:

- Update am335x-pocketbeagle to use pinconf-single

- A series of devicetree warning fixes for omap3 and gta04

- Configure bb2d Vivante GC 2D Accelerator for dra7

* tag 'omap-for-v5.16/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra7: add entry for bb2d module
  arm: dts: omap3-gta04: cleanup led node names
  arm: dts: omap3-gta04a4: accelerometer irq fix
  arm: dts: omap3-gta04a5: fix missing sensor supply
  arm: dts: omap3-gta04: fix missing sensor supply
  arm: dts: omap3-gta04: cleanup LCD definition
  ARM: dts: omap3: fix cpu thermal label name
  ARM: dts: am335x-pocketbeagle: switch to pinconf-single

Link: https://lore.kernel.org/r/pull-1633950030-501948@atomide.com-3Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/am335x-pocketbeagle.dts

@@ -205,6 +205,7 @@ &gpio3 {
 
 &am33xx_pinmux {
 
+	compatible = "pinconf-single";
 	pinctrl-names = "default";
 
 	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio

arch/arm/boot/dts/dra7.dtsi

@@ -965,6 +965,25 @@ hdmi: encoder@0 {
 			};
 		};
 
+		target-module@59000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x59000020 0x4>;
+			reg-names = "rev";
+			clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000000 0x1000>;
+
+			bb2d: gpu@0 {
+				compatible = "vivante,gc";
+				reg = <0x0 0x700>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
+				clock-names = "core";
+			};
+		};
+
 		aes1_target: target-module@4b500000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x4b500080 0x4>,

arch/arm/boot/dts/omap3-cpu-thermal.dtsi

@@ -10,7 +10,7 @@
 
 #include <dt-bindings/thermal/thermal.h>
 
-cpu_thermal: cpu_thermal {
+cpu_thermal: cpu-thermal {
 	polling-delay-passive = <250>; /* milliseconds */
 	polling-delay = <1000>; /* milliseconds */
 	coefficients = <0 20000>;

arch/arm/boot/dts/omap3-gta04.dtsi

@@ -104,16 +104,16 @@ gtm601_codec: gsm_codec {
 		#sound-dai-cells = <0>;
 	};
 
-	spi_lcd: spi_lcd {
+	spi_lcd: spi {
 		compatible = "spi-gpio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi_gpio_pins>;
 
-		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
@@ -508,6 +508,8 @@ bmp085@77 {
 		pinctrl-0 = <&bmp085_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
+		vdda-supply = <&vio>;
+		vddd-supply = <&vio>;
 	};
 
 	/* accelerometer */
@@ -515,7 +517,7 @@ bma180@41 {
 		compatible = "bosch,bma180";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pintcrl-0 = <&bma180_pins>;
+		pinctrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
@@ -540,28 +542,29 @@ tca6507: tca6507@45 {
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		gta04_led0: red_aux@0 {
+		gta04_led0: led@0 {
 			label = "gta04:red:aux";
 			reg = <0x0>;
 		};
 
-		gta04_led1: green_aux@1 {
+		gta04_led1: led@1 {
 			label = "gta04:green:aux";
 			reg = <0x1>;
 		};
 
-		gta04_led3: red_power@3 {
+		gta04_led3: led@3 {
 			label = "gta04:red:power";
 			reg = <0x3>;
 			linux,default-trigger = "default-on";
 		};
 
-		gta04_led4: green_power@4 {
+		gta04_led4: led@4 {
 			label = "gta04:green:power";
 			reg = <0x4>;
 		};
 
-		wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
+		wifi_reset: led@6 {
+			/* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
 			reg = <0x6>;
 			compatible = "gpio";
 		};

arch/arm/boot/dts/omap3-gta04a5.dts

@@ -133,5 +133,7 @@ bmc150@12 {
 	bme280@76 {
 		compatible = "bosch,bme280";
 		reg = <0x76>;
+		vdda-supply = <&vio>;
+		vddd-supply = <&vio>;
 	};
 };