Commit c3bbacd6 authored by Mathias Nyman's avatar Mathias Nyman Committed by Greg Kroah-Hartman

xhci: disable U3 suspended ports in S4 hibernate poweroff_late stage

Disable U3 suspended ports in hibernate S4 poweroff_late for systems
with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled.

This reduces the number of self-powered usb devices from surviving in
U3 suspended state into next reboot.

Bootloader/firmware on these systems can't handle usb ports in U3, and
will timeout, causing extra delay during reboot/restore from S4.

Add pci_poweroff_late() callback to struct usb_hcd to get this done at
the correct stage in hibernate.
Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@linux.intel.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 705c333a
...@@ -558,6 +558,17 @@ static int hcd_pci_suspend_noirq(struct device *dev) ...@@ -558,6 +558,17 @@ static int hcd_pci_suspend_noirq(struct device *dev)
return retval; return retval;
} }
static int hcd_pci_poweroff_late(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
if (hcd->driver->pci_poweroff_late && !HCD_DEAD(hcd))
return hcd->driver->pci_poweroff_late(hcd, device_may_wakeup(dev));
return 0;
}
static int hcd_pci_resume_noirq(struct device *dev) static int hcd_pci_resume_noirq(struct device *dev)
{ {
powermac_set_asic(to_pci_dev(dev), 1); powermac_set_asic(to_pci_dev(dev), 1);
...@@ -578,6 +589,7 @@ static int hcd_pci_restore(struct device *dev) ...@@ -578,6 +589,7 @@ static int hcd_pci_restore(struct device *dev)
#define hcd_pci_suspend NULL #define hcd_pci_suspend NULL
#define hcd_pci_suspend_noirq NULL #define hcd_pci_suspend_noirq NULL
#define hcd_pci_poweroff_late NULL
#define hcd_pci_resume_noirq NULL #define hcd_pci_resume_noirq NULL
#define hcd_pci_resume NULL #define hcd_pci_resume NULL
#define hcd_pci_restore NULL #define hcd_pci_restore NULL
...@@ -615,6 +627,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = { ...@@ -615,6 +627,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
.thaw_noirq = NULL, .thaw_noirq = NULL,
.thaw = hcd_pci_resume, .thaw = hcd_pci_resume,
.poweroff = hcd_pci_suspend, .poweroff = hcd_pci_suspend,
.poweroff_late = hcd_pci_poweroff_late,
.poweroff_noirq = hcd_pci_suspend_noirq, .poweroff_noirq = hcd_pci_suspend_noirq,
.restore_noirq = hcd_pci_resume_noirq, .restore_noirq = hcd_pci_resume_noirq,
.restore = hcd_pci_restore, .restore = hcd_pci_restore,
......
...@@ -622,6 +622,57 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) ...@@ -622,6 +622,57 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
return retval; return retval;
} }
static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_port *port;
struct usb_device *udev;
unsigned int slot_id;
u32 portsc;
int i;
/*
* Systems with XHCI_RESET_TO_DEFAULT quirk have boot firmware that
* cause significant boot delay if usb ports are in suspended U3 state
* during boot. Some USB devices survive in U3 state over S4 hibernate
*
* Disable ports that are in U3 if remote wake is not enabled for either
* host controller or connected device
*/
if (!(xhci->quirks & XHCI_RESET_TO_DEFAULT))
return 0;
for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
port = &xhci->hw_ports[i];
portsc = readl(port->addr);
if ((portsc & PORT_PLS_MASK) != XDEV_U3)
continue;
slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci,
port->hcd_portnum + 1);
if (!slot_id || !xhci->devs[slot_id]) {
xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n",
slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
continue;
}
udev = xhci->devs[slot_id]->udev;
/* if wakeup is enabled then don't disable the port */
if (udev->do_remote_wakeup && do_wakeup)
continue;
xhci_dbg(xhci, "port %d-%d in U3 without wakeup, disable it\n",
port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
portsc = xhci_port_state_to_neutral(portsc);
writel(portsc | PORT_PE, port->addr);
}
return 0;
}
static void xhci_pci_shutdown(struct usb_hcd *hcd) static void xhci_pci_shutdown(struct usb_hcd *hcd)
{ {
struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_hcd *xhci = hcd_to_xhci(hcd);
...@@ -689,6 +740,7 @@ static int __init xhci_pci_init(void) ...@@ -689,6 +740,7 @@ static int __init xhci_pci_init(void)
#ifdef CONFIG_PM #ifdef CONFIG_PM
xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
xhci_pci_hc_driver.pci_resume = xhci_pci_resume; xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
xhci_pci_hc_driver.pci_poweroff_late = xhci_pci_poweroff_late;
xhci_pci_hc_driver.shutdown = xhci_pci_shutdown; xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
#endif #endif
return pci_register_driver(&xhci_pci_driver); return pci_register_driver(&xhci_pci_driver);
......
...@@ -269,6 +269,9 @@ struct hc_driver { ...@@ -269,6 +269,9 @@ struct hc_driver {
/* called after entering D0 (etc), before resuming the hub */ /* called after entering D0 (etc), before resuming the hub */
int (*pci_resume)(struct usb_hcd *hcd, bool hibernated); int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
/* called just before hibernate final D3 state, allows host to poweroff parts */
int (*pci_poweroff_late)(struct usb_hcd *hcd, bool do_wakeup);
/* cleanly make HCD stop writing memory and doing I/O */ /* cleanly make HCD stop writing memory and doing I/O */
void (*stop) (struct usb_hcd *hcd); void (*stop) (struct usb_hcd *hcd);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment