Commit c3d266c8 authored by Kan Liang's avatar Kan Liang Committed by Ingo Molnar

perf/x86/intel: Fix PEBS warning by only restoring active PMU in pmi

This patch tries to fix a PEBS warning found in my stress test. The
following perf command can easily trigger the pebs warning or spurious
NMI error on Skylake/Broadwell/Haswell platforms:

  sudo perf record -e 'cpu/umask=0x04,event=0xc4/pp,cycles,branches,ref-cycles,cache-misses,cache-references' --call-graph fp -b -c1000 -a

Also the NMI watchdog must be enabled.

For this case, the events number is larger than counter number. So
perf has to do multiplexing.

In perf_mux_hrtimer_handler, it does perf_pmu_disable(), schedule out
old events, rotate_ctx, schedule in new events and finally
perf_pmu_enable().

If the old events include precise event, the MSR_IA32_PEBS_ENABLE
should be cleared when perf_pmu_disable().  The MSR_IA32_PEBS_ENABLE
should keep 0 until the perf_pmu_enable() is called and the new event is
precise event.

However, there is a corner case which could restore PEBS_ENABLE to
stale value during the above period. In perf_pmu_disable(), GLOBAL_CTRL
will be set to 0 to stop overflow and followed PMI. But there may be
pending PMI from an earlier overflow, which cannot be stopped. So even
GLOBAL_CTRL is cleared, the kernel still be possible to get PMI. At
the end of the PMI handler, __intel_pmu_enable_all() will be called,
which will restore the stale values if old events haven't scheduled
out.

Once the stale pebs value is set, it's impossible to be corrected if
the new events are non-precise. Because the pebs_enabled will be set
to 0. x86_pmu.enable_all() will ignore the MSR_IA32_PEBS_ENABLE
setting. As a result, the following NMI with stale PEBS_ENABLE
trigger pebs warning.

The pending PMI after enabled=0 will become harmless if the NMI handler
does not change the state. This patch checks cpuc->enabled in pmi and
only restore the state when PMU is active.

Here is the dump:

  Call Trace:
   <NMI>  [<ffffffff813c3a2e>] dump_stack+0x63/0x85
   [<ffffffff810a46f2>] warn_slowpath_common+0x82/0xc0
   [<ffffffff810a483a>] warn_slowpath_null+0x1a/0x20
   [<ffffffff8100fe2e>] intel_pmu_drain_pebs_nhm+0x2be/0x320
   [<ffffffff8100caa9>] intel_pmu_handle_irq+0x279/0x460
   [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
   [<ffffffff811f290d>] ? vunmap_page_range+0x20d/0x330
   [<ffffffff811f2f11>] ?  unmap_kernel_range_noflush+0x11/0x20
   [<ffffffff8148379f>] ? ghes_copy_tofrom_phys+0x10f/0x2a0
   [<ffffffff814839c8>] ? ghes_read_estatus+0x98/0x170
   [<ffffffff81005a7d>] perf_event_nmi_handler+0x2d/0x50
   [<ffffffff810310b9>] nmi_handle+0x69/0x120
   [<ffffffff810316f6>] default_do_nmi+0xe6/0x100
   [<ffffffff810317f2>] do_nmi+0xe2/0x130
   [<ffffffff817aea71>] end_repeat_nmi+0x1a/0x1e
   [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
   [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
   [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
   <<EOE>>  <IRQ>  [<ffffffff81006df8>] ?  x86_perf_event_set_period+0xd8/0x180
   [<ffffffff81006eec>] x86_pmu_start+0x4c/0x100
   [<ffffffff8100722d>] x86_pmu_enable+0x28d/0x300
   [<ffffffff811994d7>] perf_pmu_enable.part.81+0x7/0x10
   [<ffffffff8119cb70>] perf_mux_hrtimer_handler+0x200/0x280
   [<ffffffff8119c970>] ?  __perf_install_in_context+0xc0/0xc0
   [<ffffffff8110f92d>] __hrtimer_run_queues+0xfd/0x280
   [<ffffffff811100d8>] hrtimer_interrupt+0xa8/0x190
   [<ffffffff81199080>] ?  __perf_read_group_add.part.61+0x1a0/0x1a0
   [<ffffffff81051bd8>] local_apic_timer_interrupt+0x38/0x60
   [<ffffffff817af01d>] smp_apic_timer_interrupt+0x3d/0x50
   [<ffffffff817ad15c>] apic_timer_interrupt+0x8c/0xa0
   <EOI>  [<ffffffff81199080>] ?  __perf_read_group_add.part.61+0x1a0/0x1a0
   [<ffffffff81123de5>] ?  smp_call_function_single+0xd5/0x130
   [<ffffffff81123ddb>] ?  smp_call_function_single+0xcb/0x130
   [<ffffffff81199080>] ?  __perf_read_group_add.part.61+0x1a0/0x1a0
   [<ffffffff8119765a>] event_function_call+0x10a/0x120
   [<ffffffff8119c660>] ? ctx_resched+0x90/0x90
   [<ffffffff811971e0>] ? cpu_clock_event_read+0x30/0x30
   [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60
   [<ffffffff8119772b>] _perf_event_enable+0x5b/0x70
   [<ffffffff81197388>] perf_event_for_each_child+0x38/0xa0
   [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60
   [<ffffffff811a0ffd>] perf_ioctl+0x12d/0x3c0
   [<ffffffff8134d855>] ? selinux_file_ioctl+0x95/0x1e0
   [<ffffffff8124a3a1>] do_vfs_ioctl+0xa1/0x5a0
   [<ffffffff81036d29>] ? sched_clock+0x9/0x10
   [<ffffffff8124a919>] SyS_ioctl+0x79/0x90
   [<ffffffff817ac4b2>] entry_SYSCALL_64_fastpath+0x1a/0xa4
  ---[ end trace aef202839fe9a71d ]---
  Uhhuh. NMI received for unknown reason 2d on CPU 2.
  Do you have a strange power saving mode enabled?
Signed-off-by: default avatarKan Liang <kan.liang@intel.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1457046448-6184-1-git-send-email-kan.liang@intel.com
[ Fixed various typos and other small details. ]
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent e72daf3f
...@@ -597,6 +597,19 @@ void x86_pmu_disable_all(void) ...@@ -597,6 +597,19 @@ void x86_pmu_disable_all(void)
} }
} }
/*
* There may be PMI landing after enabled=0. The PMI hitting could be before or
* after disable_all.
*
* If PMI hits before disable_all, the PMU will be disabled in the NMI handler.
* It will not be re-enabled in the NMI handler again, because enabled=0. After
* handling the NMI, disable_all will be called, which will not change the
* state either. If PMI hits after disable_all, the PMU is already disabled
* before entering NMI handler. The NMI handler will not change the state
* either.
*
* So either situation is harmless.
*/
static void x86_pmu_disable(struct pmu *pmu) static void x86_pmu_disable(struct pmu *pmu)
{ {
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
......
...@@ -1502,7 +1502,15 @@ static __initconst const u64 knl_hw_cache_extra_regs ...@@ -1502,7 +1502,15 @@ static __initconst const u64 knl_hw_cache_extra_regs
}; };
/* /*
* Use from PMIs where the LBRs are already disabled. * Used from PMIs where the LBRs are already disabled.
*
* This function could be called consecutively. It is required to remain in
* disabled state if called consecutively.
*
* During consecutive calls, the same disable value will be written to related
* registers, so the PMU state remains unchanged. hw.state in
* intel_bts_disable_local will remain PERF_HES_STOPPED too in consecutive
* calls.
*/ */
static void __intel_pmu_disable_all(void) static void __intel_pmu_disable_all(void)
{ {
...@@ -1929,7 +1937,10 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) ...@@ -1929,7 +1937,10 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
goto again; goto again;
done: done:
__intel_pmu_enable_all(0, true); /* Only restore PMU state when it's active. See x86_pmu_disable(). */
if (cpuc->enabled)
__intel_pmu_enable_all(0, true);
/* /*
* Only unmask the NMI after the overflow counters * Only unmask the NMI after the overflow counters
* have been reset. This avoids spurious NMIs on * have been reset. This avoids spurious NMIs on
......
...@@ -263,7 +263,9 @@ static int knc_pmu_handle_irq(struct pt_regs *regs) ...@@ -263,7 +263,9 @@ static int knc_pmu_handle_irq(struct pt_regs *regs)
goto again; goto again;
done: done:
knc_pmu_enable_all(0); /* Only restore PMU state when it's active. See x86_pmu_disable(). */
if (cpuc->enabled)
knc_pmu_enable_all(0);
return handled; return handled;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment