Commit c3e0c873 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'clksrc-cleanup-for-3.10-part2' of...

Merge tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux into late/clksrc

This is the 2nd part of ARM timer clean-ups for 3.10. This series has
the following changes:

- Add sched_clock selection logic to select the highest frequency clock
- Use full 64-bit arch timer counter for sched_clock
- Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
adapt all users to use clocksource_of_init

* tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux:
  devtree: add binding documentation for sp804
  ARM: integrator-cp: convert use CLKSRC_OF for timer init
  ARM: versatile: use OF init for sp804 timer
  ARM: versatile: add versatile dtbs to dtbs target
  ARM: vexpress: remove extra timer-sp control register clearing
  ARM: dts: vexpress: disable CA9 core tile sp804 timer
  ARM: vexpress: remove sp804 OF init
  ARM: highbank: use OF init for sp804 timer
  ARM: timer-sp: convert to use CLKSRC_OF init
  OF: add empty of_device_is_available for !OF
  ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
  ARM: make machine_desc->init_time default to clocksource_of_init
  ARM: arch_timer: use full 64-bit counter for sched_clock
  ARM: make sched_clock just call a function pointer
  ARM: sched_clock: allow changing to higher frequency counter
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>

This has a nasty set of conflicts with the exynos MCT code, which was
moved in a separate branch, and then fixed up when merged in, but still
conflicts a bit here. It should have been sorted out by this merge though.
parents 228e3023 69a517b2
ARM sp804 Dual Timers
---------------------------------------
Required properties:
- compatible: Should be "arm,sp804" & "arm,primecell"
- interrupts: Should contain the list of Dual Timer interrupts. This is the
interrupt for timer 1 and timer 2. In the case of a single entry, it is
the combined interrupt or if "arm,sp804-has-irq" is present that
specifies which timer interrupt is connected.
- reg: Should contain location and length for dual timer register.
- clocks: clocks driving the dual timer hardware. This list should be 1 or 3
clocks. With 3 clocks, the order is timer0 clock, timer1 clock,
apb_pclk. A single clock can also be specified if the same clock is
used for all clock inputs.
Optional properties:
- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this
specifies if the irq connection is for timer 1 or timer 2. A value of 1
or 2 should be used.
Example:
timer0: timer@fc800000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0xfc800000 0x1000>;
interrupts = <0 0 4>, <0 1 4>;
clocks = <&timclk1 &timclk2 &pclk>;
clock-names = "timer1", "timer2", "apb_pclk";
};
......@@ -1180,6 +1180,7 @@ config PLAT_VERSATILE
config ARM_TIMER_SP804
bool
select CLKSRC_MMIO
select CLKSRC_OF if OF
select HAVE_SCHED_CLOCK
source arch/arm/mm/Kconfig
......
......@@ -165,6 +165,8 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
tegra114-pluto.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
versatile-pb.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
......
......@@ -24,15 +24,15 @@ cpcon {
};
timer0: timer@13000000 {
compatible = "arm,sp804", "arm,primecell";
compatible = "arm,integrator-cp-timer";
};
timer1: timer@13000100 {
compatible = "arm,sp804", "arm,primecell";
compatible = "arm,integrator-cp-timer";
};
timer2: timer@13000200 {
compatible = "arm,sp804", "arm,primecell";
compatible = "arm,integrator-cp-timer";
};
pic: pic@14000000 {
......
......@@ -121,6 +121,18 @@ watchdog@101e1000 {
interrupts = <0>;
};
timer@101e2000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x101e2000 0x1000>;
interrupts = <4>;
};
timer@101e3000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x101e3000 0x1000>;
interrupts = <5>;
};
gpio0: gpio@101e4000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x101e4000 0x1000>;
......
......@@ -98,6 +98,7 @@ timer@100e4000 {
<0 49 4>;
clocks = <&oscclk2>, <&oscclk2>;
clock-names = "timclk", "apb_pclk";
status = "disabled";
};
watchdog@100e5000 {
......
......@@ -25,33 +25,29 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/sched_clock.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
static long __init sp804_get_clock_rate(const char *name)
static long __init sp804_get_clock_rate(struct clk *clk)
{
struct clk *clk;
long rate;
int err;
clk = clk_get_sys("sp804", name);
if (IS_ERR(clk)) {
pr_err("sp804: %s clock not found: %d\n", name,
(int)PTR_ERR(clk));
return PTR_ERR(clk);
}
err = clk_prepare(clk);
if (err) {
pr_err("sp804: %s clock failed to prepare: %d\n", name, err);
pr_err("sp804: clock failed to prepare: %d\n", err);
clk_put(clk);
return err;
}
err = clk_enable(clk);
if (err) {
pr_err("sp804: %s clock failed to enable: %d\n", name, err);
pr_err("sp804: clock failed to enable: %d\n", err);
clk_unprepare(clk);
clk_put(clk);
return err;
......@@ -59,7 +55,7 @@ static long __init sp804_get_clock_rate(const char *name)
rate = clk_get_rate(clk);
if (rate < 0) {
pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
pr_err("sp804: clock failed to get rate: %ld\n", rate);
clk_disable(clk);
clk_unprepare(clk);
clk_put(clk);
......@@ -77,9 +73,21 @@ static u32 sp804_read(void)
void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
const char *name,
struct clk *clk,
int use_sched_clock)
{
long rate = sp804_get_clock_rate(name);
long rate;
if (!clk) {
clk = clk_get_sys("sp804", name);
if (IS_ERR(clk)) {
pr_err("sp804: clock not found: %d\n",
(int)PTR_ERR(clk));
return;
}
}
rate = sp804_get_clock_rate(clk);
if (rate < 0)
return;
......@@ -171,12 +179,20 @@ static struct irqaction sp804_timer_irq = {
.dev_id = &sp804_clockevent,
};
void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
const char *name)
void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
long rate = sp804_get_clock_rate(name);
long rate;
if (!clk)
clk = clk_get_sys("sp804", name);
if (IS_ERR(clk)) {
pr_err("sp804: %s clock not found: %d\n", name,
(int)PTR_ERR(clk));
return;
}
rate = sp804_get_clock_rate(clk);
if (rate < 0)
return;
......@@ -186,6 +202,98 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
evt->irq = irq;
evt->cpumask = cpu_possible_mask;
writel(0, base + TIMER_CTRL);
setup_irq(irq, &sp804_timer_irq);
clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
}
static void __init sp804_of_init(struct device_node *np)
{
static bool initialized = false;
void __iomem *base;
int irq;
u32 irq_num = 0;
struct clk *clk1, *clk2;
const char *name = of_get_property(np, "compatible", NULL);
base = of_iomap(np, 0);
if (WARN_ON(!base))
return;
/* Ensure timers are disabled */
writel(0, base + TIMER_CTRL);
writel(0, base + TIMER_2_BASE + TIMER_CTRL);
if (initialized || !of_device_is_available(np))
goto err;
clk1 = of_clk_get(np, 0);
if (IS_ERR(clk1))
clk1 = NULL;
/* Get the 2nd clock if the timer has 2 timer clocks */
if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) {
clk2 = of_clk_get(np, 1);
if (IS_ERR(clk2)) {
pr_err("sp804: %s clock not found: %d\n", np->name,
(int)PTR_ERR(clk2));
goto err;
}
} else
clk2 = clk1;
irq = irq_of_parse_and_map(np, 0);
if (irq <= 0)
goto err;
of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
if (irq_num == 2) {
__sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
__sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
} else {
__sp804_clockevents_init(base, irq, clk1 , name);
__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
name, clk2, 1);
}
initialized = true;
return;
err:
iounmap(base);
}
CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
static void __init integrator_cp_of_init(struct device_node *np)
{
static int init_count = 0;
void __iomem *base;
int irq;
const char *name = of_get_property(np, "compatible", NULL);
base = of_iomap(np, 0);
if (WARN_ON(!base))
return;
/* Ensure timer is disabled */
writel(0, base + TIMER_CTRL);
if (init_count == 2 || !of_device_is_available(np))
goto err;
if (!init_count)
sp804_clocksource_init(base, name);
else {
irq = irq_of_parse_and_map(np, 0);
if (irq <= 0)
goto err;
sp804_clockevents_init(base, irq, name);
}
init_count++;
return;
err:
iounmap(base);
}
CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
......@@ -10,8 +10,7 @@
#include <clocksource/arm_arch_timer.h>
#ifdef CONFIG_ARM_ARCH_TIMER
int arch_timer_of_register(void);
int arch_timer_sched_clock_init(void);
int arch_timer_arch_init(void);
/*
* These register accessors are marked inline so the compiler can
......@@ -110,16 +109,6 @@ static inline void __cpuinit arch_counter_set_user_access(void)
asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
}
#else
static inline int arch_timer_of_register(void)
{
return -ENXIO;
}
static inline int arch_timer_sched_clock_init(void)
{
return -ENXIO;
}
#endif
#endif
struct clk;
void __sp804_clocksource_and_sched_clock_init(void __iomem *,
const char *, int);
const char *, struct clk *, int);
void __sp804_clockevents_init(void __iomem *, unsigned int,
struct clk *, const char *);
static inline void sp804_clocksource_init(void __iomem *base, const char *name)
{
__sp804_clocksource_and_sched_clock_init(base, name, 0);
__sp804_clocksource_and_sched_clock_init(base, name, NULL, 0);
}
static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
const char *name)
{
__sp804_clocksource_and_sched_clock_init(base, name, 1);
__sp804_clocksource_and_sched_clock_init(base, name, NULL, 1);
}
void sp804_clockevents_init(void __iomem *, unsigned int, const char *);
static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name)
{
__sp804_clockevents_init(base, irq, NULL, name);
}
......@@ -11,4 +11,6 @@
extern void sched_clock_postinit(void);
extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
extern unsigned long long (*sched_clock_func)(void);
#endif
......@@ -22,9 +22,11 @@ static unsigned long arch_timer_read_counter_long(void)
return arch_timer_read_counter();
}
static u32 arch_timer_read_counter_u32(void)
static u32 sched_clock_mult __read_mostly;
static unsigned long long notrace arch_timer_sched_clock(void)
{
return arch_timer_read_counter();
return arch_timer_read_counter() * sched_clock_mult;
}
static struct delay_timer arch_delay_timer;
......@@ -37,25 +39,20 @@ static void __init arch_timer_delay_timer_register(void)
register_current_timer_delay(&arch_delay_timer);
}
int __init arch_timer_of_register(void)
int __init arch_timer_arch_init(void)
{
int ret;
u32 arch_timer_rate = arch_timer_get_rate();
ret = arch_timer_init();
if (ret)
return ret;
if (arch_timer_rate == 0)
return -ENXIO;
arch_timer_delay_timer_register();
return 0;
}
int __init arch_timer_sched_clock_init(void)
{
if (arch_timer_get_rate() == 0)
return -ENXIO;
/* Cache the sched_clock multiplier to save a divide in the hot path. */
sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
sched_clock_func = arch_timer_sched_clock;
pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n",
arch_timer_rate / 1000, sched_clock_mult);
setup_sched_clock(arch_timer_read_counter_u32,
32, arch_timer_get_rate());
return 0;
}
......@@ -20,6 +20,7 @@ struct clock_data {
u64 epoch_ns;
u32 epoch_cyc;
u32 epoch_cyc_copy;
unsigned long rate;
u32 mult;
u32 shift;
bool suspended;
......@@ -113,11 +114,14 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
u64 res, wrap;
char r_unit;
if (cd.rate > rate)
return;
BUG_ON(bits > 32);
WARN_ON(!irqs_disabled());
WARN_ON(read_sched_clock != jiffy_sched_clock_read);
read_sched_clock = read;
sched_clock_mask = (1 << bits) - 1;
cd.rate = rate;
/* calculate the mult/shift to convert counter ticks to ns. */
clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
......@@ -161,12 +165,19 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
pr_debug("Registered %pF as sched_clock source\n", read);
}
unsigned long long notrace sched_clock(void)
static unsigned long long notrace sched_clock_32(void)
{
u32 cyc = read_sched_clock();
return cyc_to_sched_clock(cyc, sched_clock_mask);
}
unsigned long long __read_mostly (*sched_clock_func)(void) = sched_clock_32;
unsigned long long notrace sched_clock(void)
{
return sched_clock_func();
}
void __init sched_clock_postinit(void)
{
/*
......
......@@ -22,6 +22,7 @@
#include <linux/errno.h>
#include <linux/profile.h>
#include <linux/timer.h>
#include <linux/clocksource.h>
#include <linux/irq.h>
#include <asm/thread_info.h>
......@@ -115,6 +116,10 @@ int __init register_persistent_clock(clock_access_fn read_boot,
void __init time_init(void)
{
machine_desc->init_time();
if (machine_desc->init_time)
machine_desc->init_time();
else
clocksource_of_init();
sched_clock_postinit();
}
......@@ -217,7 +217,6 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
.map_io = exynos5_dt_map_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
.init_time = clocksource_of_init,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,
......
......@@ -15,6 +15,7 @@
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/irq.h>
......@@ -28,12 +29,9 @@
#include <linux/amba/bus.h>
#include <linux/clk-provider.h>
#include <asm/arch_timer.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/smp_plat.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -90,36 +88,16 @@ static void __init highbank_init_irq(void)
#endif
}
static struct clk_lookup lookup = {
.dev_id = "sp804",
.con_id = NULL,
};
static void __init highbank_timer_init(void)
{
int irq;
struct device_node *np;
void __iomem *timer_base;
/* Map system registers */
np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
sregs_base = of_iomap(np, 0);
WARN_ON(!sregs_base);
np = of_find_compatible_node(NULL, NULL, "arm,sp804");
timer_base = of_iomap(np, 0);
WARN_ON(!timer_base);
irq = irq_of_parse_and_map(np, 0);
of_clk_init(NULL);
lookup.clk = of_clk_get(np, 0);
clkdev_add(&lookup);
sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
sp804_clockevents_init(timer_base, irq, "timer0");
arch_timer_of_register();
arch_timer_sched_clock_init();
clocksource_of_init();
}
......
......@@ -250,39 +250,6 @@ static void __init intcp_init_early(void)
}
#ifdef CONFIG_OF
static void __init cp_of_timer_init(void)
{
struct device_node *node;
const char *path;
void __iomem *base;
int err;
int irq;
err = of_property_read_string(of_aliases,
"arm,timer-primary", &path);
if (WARN_ON(err))
return;
node = of_find_node_by_path(path);
base = of_iomap(node, 0);
if (WARN_ON(!base))
return;
writel(0, base + TIMER_CTRL);
sp804_clocksource_init(base, node->name);
err = of_property_read_string(of_aliases,
"arm,timer-secondary", &path);
if (WARN_ON(err))
return;
node = of_find_node_by_path(path);
base = of_iomap(node, 0);
if (WARN_ON(!base))
return;
irq = irq_of_parse_and_map(node, 0);
writel(0, base + TIMER_CTRL);
sp804_clockevents_init(base, irq, node->name);
}
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
......@@ -383,7 +350,6 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
.init_early = intcp_init_early,
.init_irq = intcp_init_irq_of,
.handle_irq = fpga_handle_irq,
.init_time = cp_of_timer_init,
.init_machine = intcp_init_of,
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
......
......@@ -46,7 +46,6 @@
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
#include <asm/arch_timer.h>
#include "omap_hwmod.h"
#include "omap_device.h"
#include <plat/counter-32k.h>
......@@ -627,9 +626,7 @@ void __init omap5_realtime_timer_init(void)
omap4_sync32k_timer_init();
realtime_counter_init();
err = arch_timer_of_register();
if (err)
pr_err("%s: arch_timer_register failed %d\n", __func__, err);
clocksource_of_init();
}
#endif /* CONFIG_SOC_OMAP5 */
......
......@@ -90,6 +90,5 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d")
.init_irq = emev2_init_irq,
.init_machine = kzm9d_add_standard_devices,
.init_late = shmobile_init_late,
.init_time = shmobile_timer_init,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
......@@ -456,7 +456,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = irqchip_init,
.init_machine = emev2_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
......
......@@ -906,7 +906,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = r8a7740_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = r8a7740_boards_compat_dt,
MACHINE_END
......
......@@ -1175,7 +1175,6 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = sh7372_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = sh7372_boards_compat_dt,
MACHINE_END
......
......@@ -1037,7 +1037,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = irqchip_init,
.init_machine = sh73a0_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = sh73a0_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
......@@ -19,10 +19,8 @@
*
*/
#include <linux/platform_device.h>
#include <linux/clocksource.h>
#include <linux/delay.h>
#include <asm/arch_timer.h>
#include <asm/mach/time.h>
#include <asm/smp_twd.h>
void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
unsigned int mult, unsigned int div)
......@@ -63,6 +61,5 @@ void __init shmobile_earlytimer_init(void)
void __init shmobile_timer_init(void)
{
arch_timer_of_register();
arch_timer_sched_clock_init();
clocksource_of_init();
}
......@@ -749,12 +749,25 @@ void versatile_restart(char mode, const char *cmd)
/* Early initializations */
void __init versatile_init_early(void)
{
u32 val;
void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET;
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
* VERSATILE_TIMCLK is 1MHz
*/
val = readl(__io_address(VERSATILE_SCTL_BASE));
writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
__io_address(VERSATILE_SCTL_BASE));
}
void __init versatile_init(void)
......@@ -785,19 +798,6 @@ void __init versatile_init(void)
*/
void __init versatile_timer_init(void)
{
u32 val;
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
* VERSATILE_TIMCLK is 1MHz
*/
val = readl(__io_address(VERSATILE_SCTL_BASE));
writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
__io_address(VERSATILE_SCTL_BASE));
/*
* Initialise to a known state (all timers off)
......
......@@ -45,7 +45,6 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
.init_time = versatile_timer_init,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
.restart = versatile_restart,
......
/*
* Versatile Express V2M Motherboard Support
*/
#include <linux/clocksource.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
......@@ -23,7 +24,6 @@
#include <linux/regulator/machine.h>
#include <linux/vexpress.h>
#include <asm/arch_timer.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
......@@ -61,9 +61,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
if (WARN_ON(!base || irq == NO_IRQ))
return;
writel(0, base + TIMER_1_BASE + TIMER_CTRL);
writel(0, base + TIMER_2_BASE + TIMER_CTRL);
sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
}
......@@ -431,25 +428,11 @@ void __init v2m_dt_init_early(void)
static void __init v2m_dt_timer_init(void)
{
struct device_node *node = NULL;
vexpress_clk_of_init();
clocksource_of_init();
do {
node = of_find_compatible_node(node, NULL, "arm,sp804");
} while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB);
if (node) {
pr_info("Using SP804 '%s' as a clock & events source\n",
node->full_name);
v2m_sp804_init(of_iomap(node, 0),
irq_of_parse_and_map(node, 0));
}
arch_timer_of_register();
if (arch_timer_sched_clock_init() != 0)
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
24000000);
}
......
......@@ -23,21 +23,13 @@
#include <linux/of_platform.h>
#include <linux/smp.h>
#include <asm/arch_timer.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
static void __init virt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static void __init virt_timer_init(void)
{
WARN_ON(arch_timer_of_register() != 0);
WARN_ON(arch_timer_sched_clock_init() != 0);
}
static const char *virt_dt_match[] = {
"linux,dummy-virt",
NULL
......@@ -47,7 +39,6 @@ extern struct smp_operations virt_smp_ops;
DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
.init_irq = irqchip_init,
.init_time = virt_timer_init,
.init_machine = virt_init,
.smp = smp_ops(virt_smp_ops),
.dt_compat = virt_dt_match,
......
......@@ -130,4 +130,9 @@ static inline u64 arch_counter_get_cntvct(void)
return cval;
}
static inline int arch_timer_arch_init(void)
{
return 0;
}
#endif
......@@ -32,6 +32,7 @@
#include <linux/timer.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/clocksource.h>
#include <clocksource/arm_arch_timer.h>
......@@ -77,10 +78,11 @@ void __init time_init(void)
{
u32 arch_timer_rate;
if (arch_timer_init())
panic("Unable to initialise architected timer.\n");
clocksource_of_init();
arch_timer_rate = arch_timer_get_rate();
if (!arch_timer_rate)
panic("Unable to initialise architected timer.\n");
/* Cache the sched_clock multiplier to save a divide in the hot path. */
sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
......
......@@ -65,6 +65,7 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
config ARM_ARCH_TIMER
bool
select CLKSRC_OF if OF
config CLKSRC_METAG_GENERIC
def_bool y if METAG
......
......@@ -337,22 +337,14 @@ static int __init arch_timer_register(void)
return err;
}
static const struct of_device_id arch_timer_of_match[] __initconst = {
{ .compatible = "arm,armv7-timer", },
{ .compatible = "arm,armv8-timer", },
{},
};
int __init arch_timer_init(void)
static void __init arch_timer_init(struct device_node *np)
{
struct device_node *np;
u32 freq;
int i;
np = of_find_matching_node(NULL, arch_timer_of_match);
if (!np) {
pr_err("arch_timer: can't find DT node\n");
return -ENODEV;
if (arch_timer_get_rate()) {
pr_warn("arch_timer: multiple nodes in dt, skipping\n");
return;
}
/* Try to determine the frequency from the device tree or CNTFRQ */
......@@ -378,7 +370,7 @@ int __init arch_timer_init(void)
if (!arch_timer_ppi[PHYS_SECURE_PPI] ||
!arch_timer_ppi[PHYS_NONSECURE_PPI]) {
pr_warn("arch_timer: No interrupt available, giving up\n");
return -EINVAL;
return;
}
}
......@@ -387,5 +379,8 @@ int __init arch_timer_init(void)
else
arch_timer_read_counter = arch_counter_get_cntpct;
return arch_timer_register();
arch_timer_register();
arch_timer_arch_init();
}
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init);
CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init);
......@@ -24,7 +24,6 @@
#include <linux/of_address.h>
#include <linux/clocksource.h>
#include <asm/arch_timer.h>
#include <asm/localtimer.h>
#include <plat/cpu.h>
......
......@@ -31,18 +31,12 @@
#ifdef CONFIG_ARM_ARCH_TIMER
extern int arch_timer_init(void);
extern u32 arch_timer_get_rate(void);
extern u64 (*arch_timer_read_counter)(void);
extern struct timecounter *arch_timer_get_timecounter(void);
#else
static inline int arch_timer_init(void)
{
return -ENXIO;
}
static inline u32 arch_timer_get_rate(void)
{
return 0;
......
......@@ -382,6 +382,11 @@ static inline int of_device_is_compatible(const struct device_node *device,
return 0;
}
static inline int of_device_is_available(const struct device_node *device)
{
return 0;
}
static inline struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment