Commit c3e666f1 authored by Mark Bloch's avatar Mark Bloch Committed by Saeed Mahameed

net/mlx5: Add IFC bits needed for single FDB mode

Currently we operate in a mode where each eswitch manager has a separate
FDB. In order to combine these multiple FDBs we expose new caps to allow
this:

- Set root flow table which isn't native.
- Set FDB a different selection mode when in LAG mode.
Signed-off-by: default avatarMark Bloch <mbloch@nvidia.com>
Reviewed-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
parent 3a46f4fb
......@@ -806,9 +806,11 @@ struct mlx5_ifc_e_switch_cap_bits {
u8 vport_svlan_insert[0x1];
u8 vport_cvlan_insert_if_not_exist[0x1];
u8 vport_cvlan_insert_overwrite[0x1];
u8 reserved_at_5[0x3];
u8 reserved_at_5[0x2];
u8 esw_shared_ingress_acl[0x1];
u8 esw_uplink_ingress_acl[0x1];
u8 reserved_at_9[0x10];
u8 root_ft_on_other_esw[0x1];
u8 reserved_at_a[0xf];
u8 esw_functions_changed[0x1];
u8 reserved_at_1a[0x1];
u8 ecpf_vport_exists[0x1];
......@@ -1502,7 +1504,8 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 reserved_at_270[0x6];
u8 lag_dct[0x2];
u8 lag_tx_port_affinity[0x1];
u8 reserved_at_279[0x2];
u8 lag_native_fdb_selection[0x1];
u8 reserved_at_27a[0x1];
u8 lag_master[0x1];
u8 num_lag_ports[0x4];
......@@ -10036,14 +10039,19 @@ struct mlx5_ifc_set_flow_table_root_in_bits {
u8 reserved_at_60[0x20];
u8 table_type[0x8];
u8 reserved_at_88[0x18];
u8 reserved_at_88[0x7];
u8 table_of_other_vport[0x1];
u8 table_vport_number[0x10];
u8 reserved_at_a0[0x8];
u8 table_id[0x18];
u8 reserved_at_c0[0x8];
u8 underlay_qpn[0x18];
u8 reserved_at_e0[0x120];
u8 table_eswitch_owner_vhca_id_valid[0x1];
u8 reserved_at_e1[0xf];
u8 table_eswitch_owner_vhca_id[0x10];
u8 reserved_at_100[0x100];
};
enum {
......@@ -10273,7 +10281,8 @@ struct mlx5_ifc_dcbx_param_bits {
};
struct mlx5_ifc_lagc_bits {
u8 reserved_at_0[0x1d];
u8 fdb_selection_mode[0x1];
u8 reserved_at_1[0x1c];
u8 lag_state[0x3];
u8 reserved_at_20[0x14];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment