Commit c3f08d0d authored by Andrew Lunn's avatar Andrew Lunn Committed by Jason Cooper

ARM: mvebu: Simplify headers and make local

kirkwood is very nearly fully DT. Remove most of the address
definitions from the header files and make it a local header file.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Tested-by: default avatarJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 97171ad7
/*
* arch/arm/mach-mvebu/include/mach/bridge-regs.h
*
* Mbus-L to Mbus Bridge Registers
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_BRIDGE_REGS_H
#define __ASM_ARCH_BRIDGE_REGS_H
#include <mach/kirkwood.h>
#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
#define CPU_CONFIG_ERROR_PROP 0x00000004
#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
#define L2_WRITETHROUGH 0x00000010
#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
#define CGC_BIT_GE0 (0)
#define CGC_BIT_PEX0 (2)
#define CGC_BIT_USB0 (3)
#define CGC_BIT_SDIO (4)
#define CGC_BIT_TSU (5)
#define CGC_BIT_DUNIT (6)
#define CGC_BIT_RUNIT (7)
#define CGC_BIT_XOR0 (8)
#define CGC_BIT_AUDIO (9)
#define CGC_BIT_SATA0 (14)
#define CGC_BIT_SATA1 (15)
#define CGC_BIT_XOR1 (16)
#define CGC_BIT_CRYPTO (17)
#define CGC_BIT_PEX1 (18)
#define CGC_BIT_GE1 (19)
#define CGC_BIT_TDM (20)
#define CGC_GE0 (1 << 0)
#define CGC_PEX0 (1 << 2)
#define CGC_USB0 (1 << 3)
#define CGC_SDIO (1 << 4)
#define CGC_TSU (1 << 5)
#define CGC_DUNIT (1 << 6)
#define CGC_RUNIT (1 << 7)
#define CGC_XOR0 (1 << 8)
#define CGC_AUDIO (1 << 9)
#define CGC_POWERSAVE (1 << 11)
#define CGC_SATA0 (1 << 14)
#define CGC_SATA1 (1 << 15)
#define CGC_XOR1 (1 << 16)
#define CGC_CRYPTO (1 << 17)
#define CGC_PEX1 (1 << 18)
#define CGC_GE1 (1 << 19)
#define CGC_TDM (1 << 20)
#define CGC_RESERVED (0x6 << 21)
#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
#endif
/*
* arch/arm/mach-mvebu/include/mach/kirkwood.h
*
* Generic definitions for Marvell Kirkwood SoC flavors:
* 88F6180, 88F6192 and 88F6281.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_KIRKWOOD_H
#define __ASM_ARCH_KIRKWOOD_H
/*
* Marvell Kirkwood address maps.
*
* phys
* e0000000 PCIe #0 Memory space
* e8000000 PCIe #1 Memory space
* f1000000 on-chip peripheral registers
* f2000000 PCIe #0 I/O space
* f3000000 PCIe #1 I/O space
* f4000000 NAND controller address window
* f5000000 Security Accelerator SRAM
*
* virt phys size
* fed00000 f1000000 1M on-chip peripheral registers
* fee00000 f2000000 1M PCIe #0 I/O space
* fef00000 f3000000 1M PCIe #1 I/O space
*/
#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
#define KIRKWOOD_SRAM_SIZE SZ_2K
#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
#define KIRKWOOD_REGS_SIZE SZ_1M
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
/*
* Register Map
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
#define DDR_WINDOW_CPU_SZ (0x20)
#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
#define BRIDGE_WINS_SZ (0x80)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
/*
* Supported devices and revisions.
*/
#define MV88F6281_DEV_ID 0x6281
#define MV88F6281_REV_Z0 0
#define MV88F6281_REV_A0 2
#define MV88F6281_REV_A1 3
#define MV88F6192_DEV_ID 0x6192
#define MV88F6192_REV_Z0 0
#define MV88F6192_REV_A0 2
#define MV88F6192_REV_A1 3
#define MV88F6180_DEV_ID 0x6180
#define MV88F6180_REV_A0 2
#define MV88F6180_REV_A1 3
#define MV88F6282_DEV_ID 0x6282
#define MV88F6282_REV_A0 0
#define MV88F6282_REV_A1 1
#endif
......@@ -17,7 +17,7 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include "kirkwood.h"
static void __iomem *ddr_operation_base;
static void __iomem *memory_pm_ctrl;
......
......@@ -13,19 +13,16 @@
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/dma-mapping.h>
#include <linux/irqchip.h>
#include <linux/kexec.h>
#include <linux/slab.h>
#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
#include <plat/common.h>
#include <plat/pcie.h>
#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"
......
/*
* arch/arm/mach-mvebu/kirkwood.h
*
* Generic definitions for Marvell Kirkwood SoC flavors:
* 88F6180, 88F6192 and 88F6281.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
#define CPU_CONFIG_ERROR_PROP 0x00000004
#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x0118)
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment